[Unraid Forum 100K Giveaway]

I knew nothing about servers a couple months ago and unraid made it incredibly easy to build one.

 

A more secure way to access my server from outside my home (this may be in part to my lack of knowledge).

 

 

[[Support] Linuxserver.io - OpenVPN AS]

4 hours ago, CHBMB said:

No idea.

Sent from my Mi A1 using Tapatalk
 

So I think it may have to do with my port forwarding. I have checked if port 1194 is open and it is not. Not really sure where to go from here since every walkthrough takes about 2 minutes and doesn't give any additional details.

[[Support] Linuxserver.io - OpenVPN AS]

4 minutes ago, CHBMB said:

Can;t tell you exactly what the problem is but this is probably relevant.

https://serverfault.com/a/396847

 

I'd recheck your config, I suspect you've missed a setting that is incorrect.

Are they editing their .ovpn file?

[[Support] Linuxserver.io - OpenVPN AS]

Here is my log from trying to connect using my laptop:

 

Fri Nov 08 16:37:56 2019 OpenVPN 2.4.8 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Oct 31 2019
Fri Nov 08 16:37:56 2019 Windows version 6.2 (Windows 8 or greater) 64bit
Fri Nov 08 16:37:56 2019 library versions: OpenSSL 1.1.0l  10 Sep 2019, LZO 2.10
Fri Nov 08 16:37:56 2019 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Fri Nov 08 16:37:56 2019 Need hold release from management interface, waiting...
Fri Nov 08 16:37:56 2019 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Fri Nov 08 16:37:57 2019 MANAGEMENT: CMD 'state on'
Fri Nov 08 16:37:57 2019 MANAGEMENT: CMD 'log all on'
Fri Nov 08 16:37:57 2019 MANAGEMENT: CMD 'echo all on'
Fri Nov 08 16:37:57 2019 MANAGEMENT: CMD 'bytecount 5'
Fri Nov 08 16:37:57 2019 MANAGEMENT: CMD 'hold off'
Fri Nov 08 16:37:57 2019 MANAGEMENT: CMD 'hold release'
Fri Nov 08 16:37:57 2019 WARNING: --ns-cert-type is DEPRECATED.  Use --remote-cert-tls instead.
Fri Nov 08 16:37:57 2019 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Nov 08 16:37:57 2019 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Fri Nov 08 16:37:57 2019 MANAGEMENT: >STATE:1573249077,RESOLVE,,,,,,
Fri Nov 08 16:37:57 2019 TCP/UDP: Preserving recently used remote address: [AF_INET]207.98.189.235:1194
Fri Nov 08 16:37:57 2019 Socket Buffers: R=[65536->65536] S=[65536->65536]
Fri Nov 08 16:37:57 2019 UDP link local: (not bound)
Fri Nov 08 16:37:57 2019 UDP link remote: [AF_INET]207.98.189.235:1194
Fri Nov 08 16:37:57 2019 MANAGEMENT: >STATE:1573249077,WAIT,,,,,,
Fri Nov 08 16:37:57 2019 MANAGEMENT: >STATE:1573249077,AUTH,,,,,,
Fri Nov 08 16:37:57 2019 TLS: Initial packet from [AF_INET]207.98.189.235:1194, sid=e9df0c07 3bef4c4d
Fri Nov 08 16:37:57 2019 TLS Error: cannot locate HMAC in incoming packet from [AF_INET]207.98.189.235:1194
Fri Nov 08 16:37:58 2019 MANAGEMENT: >STATE:1573249078,AUTH,,,,,,
 

[[Support] Linuxserver.io - OpenVPN AS]

I've followed Spaceinvader One's newest tutorial for this (as well as setting up a duck dns profile) and I am stuck. I have verified that my IP address is correct but as soon as I get to trying to connect it fails. Any thing I should try to check first?

[[Support] Djoss - MakeMKV]

1 minute ago, Djoss said:

Ah, with the automatic disc ripper turned on, a disc is automatically ripped when inserted.  So you cannot use the UI at the same time...

It still didn't seem to recognize I had anything in the drive even outside of the gui. However, I'm perfectly fine taking the extra step of pulling up the gui.

[[Support] Djoss - MakeMKV]

On 11/6/2019 at 1:59 AM, saarg said:

You forgot to add = after device and before the /dev/sgX part

I can't seem to input this correctly, am I missing something?

 

UPDATE: So I tried turning off automatic disc ripper and it immediately recognized the first disc I tried. Are there settings with that I may have not configured correctly? Thanks again for the help, this all new territory to me.

[[Support] Djoss - MakeMKV]

3 hours ago, saarg said:

You forgot to add = after device and before the /dev/sgX part

If I have a minute tonight I'll make that change. Thanks!

[[Support] Djoss - MakeMKV]

20 minutes ago, Djoss said:

You can look at the container's log to make sure that the devices didn't change.

If not, then maybe this thread could help: https://www.makemkv.com/forum/viewtopic.php?f=1&t=19590

If you look at the MakeMKV forum, there are a couple instances of people reporting this error.

I won't be able to try again for a few days but I'll check the log.

[[Support] Djoss - MakeMKV]

Restarted multiple times, and just now put the same disc in to no avail.

[[Support] Djoss - MakeMKV]

I am having trouble getting it to recognize I have a disk in the drive. I have the Extra Parameters included and the drive is being seen, but no disks. However, today I was able to get a disk to successfully rip once I reinstalled the docker. After 1 rip it does not recognize disks anymore. Included are my settings. Any suggestions are appreciated!