[[SOLVED] UNMOUNTABLE DISK PRESENT, after delete a Share]

Thanks, It's back again!

[[SOLVED] UNMOUNTABLE DISK PRESENT, after delete a Share]

I deleted a Share within FileBrowser, after that an error occured and all the Shares disappeared. I rebooted unRAID, I see:

Quote

Unmountable disk present:
Disk 1 • ST8000VN004-2M2101_WKD1KAZZ (sdb)

How can I fix it?

nas-unraid-diagnostics-20210826-2312.zip

[Guide: bind devices to vfio-pci for easy passthrough to VMs]

On 1/14/2021 at 12:25 AM, ljm42 said:

I'm assuming you are on 6.9.0-rc2? If you hover over the disabled checkbox you should get a tooltip saying "In use by Unraid". Go to Settings -> Network Settings and remove the nic from any bonds (note: you will need to stop the array to make any changes to the network setup). Once it is no longer in use by Unraid, the checkbox will be active. If you get stuck, please upload your diagnostics (from Tools -> Diagnostics)

Solved by disable the "Enable bridging", many thanks!

[Guide: bind devices to vfio-pci for easy passthrough to VMs]

I have two NICs, one is a ConnectX-3 NIC with dual ports, the other is RTL8125 2.5GbE within the motherboard. the Unraid system is connected to the network with a cable by one port of the ConnectX-3 NIC. I want to passthrough the RTL8125 2.5GbE by vfio-pci, but the checkbox is uncheckable. How can I make it work?

[unraid官方支持简体中午界面👍]

11 hours ago, JavyLiu said:

您好，感谢您的反馈，由于开发时间紧张，有些部分确然是没有打磨到尽善尽美。

关于 "main" 的问题，已经在讨论了；至于 “interface” ，是因为考量到网口往往特指物理上可插拔的网络接口，而涉及到逻辑接口（例如 ”VLan“ 中的接口时），就不太适用。为了能适用于更广泛的情况，因此采用了这一翻译。

 

后期我们可能也会开设相应的翻译反馈页面，届时还请继续提出您的宝贵意见。

感谢你们的努力和付出！

[unraid官方支持简体中午界面👍]

不知道有些直译的部分能否再打磨一下，比如“main”现在翻成“主”，我理解可以翻译为“设备”；“interface”翻译成“接口”，我觉得翻成“网口”更合适。

[How to change settings without the Webui]

Changing the DNS addresses would not affect the webUI at all.  But, you can edit the file /config/network.cfg on the flash drive and reboot the server.

Many thanks, I will try it.

通过我的 SM-G9650 上的 Tapatalk发言

[How to change settings without the Webui]

Not now, but I can bring back my server tomorrow. How to do the change with keyboard and monitor?

通过我的 SM-G9650 上的 Tapatalk发言

[How to change settings without the Webui]

After installed the app store, I found it can not visit the APP page. so I follow the instruction to change the DNS addresses to 208.67.222.222, then the Webui can not be loaded. How can I change back the DNS setting without the Webui? thanks!