jaysin144
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jaysin144
-
-
I saw that but I've swapped out the drive with another and had the exact same problem. The Party drive appears to always generate tons of errors. I also tried removing the party drive completely and just using two disks in the array. No errors when creating the array but it generated 32 errors when I start a format and then it aborts.... I'm going to see if I can get the drives to function with LVM or maybe try FreeNas
-
OK now I'm even more stumped. I happen to have an LSI SAS2116 PCI-Express Fusion-MPT SAS-2 [Meteor] laying around and threw that in here. Took the drives and connected it to the new card, same issue.... So I either have a config issue or maybe some other hardware. One thing I noticed, no bios for either SAS card appears at boot. AMI bios, right to Unraid Boot... I might give FreeNas a try to see if it can make something out of these disks to see if there might be some other hardware related issue. Any help that you mods can provide is appreciated!
-
I tried reflashing the IT mode Firmware and Bios settings on the HBA. Same result though. bombed while trying to format. latest diag logs attached.
-
Attached. I'm suspecting there might be an issue with my HBA....
-
I built a rig and am trying out Unraid. Here's the specs:
Gigabyte B365M DS3H Board
Intel i3-8100 Proc
16G G.Skill
9210-8i SAS in IT MODE
Qty 4 Seagate 6TB SAS Disks (3 Array, 1 Parity)
Kingson 1TB SSD (Cache)
Roswiel 850W 80Plus Bronze PSU
When I boot from my Stick, Unraid comes up fine. I setup my Array with 1 - 6TB Parity, 3 - 6TB Array Members, 1 - 1TB SSD for Cache. As soon as I attempt to start the array, I get 384 Errors on the parity disk and the Read Check Pauses itself.
I've tried replacing my SAS cable, tried changing the order of the disks, tried using just two disks, tried removing the SSD.... Can't figure out why I keep getting these parity errors ONLY on the party disk, even though the Parity disk has been swapped out a few times with other disks (validated by Serial number). Not sure what else could be going on... advice??
First Unraid Build Issues
in General Support
Posted
OK I'm lost. I did a complete disk check, 0 errors. Tried to format. Errorred out. Smart reports errors...but wouldn't those errors cause the check to fail as well, or at least report the errors? Never had an issue like this with disks before. GEtting replacement disks to try.... I'm at a loss...
tower-diagnostics-20191218-1900.zip