Millerboy3
-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Millerboy3
-
-
20 hours ago, nikto said:
What version of Unraid are you running? There was a recent change to have nvidia support built-into unraid and I think it broke old docker setups for plex. I recently learned of this after it broke my setup just a few weeks ago. This requires a newer nvidia-driver plugin instead of the old nvidia-plugin that downloaded a mod'd version of unraid. I believe you need to be running one of the beta release candidates (unless something has changed) for the plugin to show up in community apps. I'm using Version: 6.9.0-rc2.
Did you already apply this new setup?
Yea already using that setup. I was thinking the screenshots helped indicate that. I'm on 6.9.0-rc2. I finally got it working after doing a ton of removing/rebuilding/readding everything and about 6-7 reboots. kinda ridiculous. But it works. Now plex is hanging on adding my mergerfs shares though. It literally pegs random cores to 100% and goes unresponsive, then I get a slow response from the db and it is unrecoverable without a reboot, and the db is fresh after all the install/reinstalls shenanigans of plex. Add them to emby with 0 issues. Really strange. So after the weird transcode issue. I guess I'll rebuild my rclone setup and see if that helps anything before coming back for further investigation.
-
As of late my hw transcoding to my M2000 no longer works. On ANY plex dockers. I have uninstalled/reinstalled the nvidia plugin multiple times, multiple restarts of the server etc. Nothing works. Changed containers to a linuxserver version, no change. The gpu is confirmed working in another system. Did something change I wasn't aware of? Just trying to get it working again, to take the load off my cpu(s). I do have a transcoding share as well that is an SSD, but I would prefer to use HW when possible. Any help would be great.
-
13 hours ago, Stupifier said:
Standard IT...."Did you turn it off and on again?"
HahaMy plex users were like WTF is happening?! my friends were texting me lol I rebooted it no less than 7-8 times.
-
So I thought I had this running. Turns out it wasn't. So I'm back to square one again, and I have moved and cleared all data in the mount locations and tried to do it again, keep getting "failed drive not empty" etc etc. So I changed the info, and it worked but didn't mount my gdrive share at all. Sort of lost at this point. Followed the github link to a T as far as I know and just can't figure out what I'm doing wrong here. Should I just attach my config files (sans the creds portion) and see if someone can look over them?
Config FilesFor whatever reason, this also causes my unraid server to hang on unmounting.
I rebooted the server for the last time to remove some dir's and clear it and try again and it finally worked. No changes made. Mind boggling.
-
1 hour ago, rzeeman711 said:
I am using the same version. 2019.11.01 by waseh. I had the same problem as you and it was fixed upon restart after mcrommert's comment. I'm not sure why your setup is different but keep working at it.
yea I'm still pushing it. I'll hopefully figure it out soon. this will make my life a heck of a lot easier.
got it working. thanks for the fix. that was a hassle. I should have left my initial scripts apparently. they worked without a hitch. odd. -
12 minutes ago, rzeeman711 said:
There is no new version, there was a fix applied to that version. Restarting unraid pulls the fix. If you restarted you should be good.
3 minutes ago, Millerboy3 said:mine still didn't fix anything. plex still can't see anything inside the folder. But I can go into terminal and see everything. despite having --allow-other setup. also which version of the plugin are you using? as the Waseh version of it isn't fixed for me?
nvm. I watched the install this time and it looks like its updated. however.... now I'm getting a critical error in my mount script. attempting to reboot now to see if that takes care of it.
-
8 minutes ago, rzeeman711 said:
There is no new version, there was a fix applied to that version. Restarting unraid pulls the fix. If you restarted you should be good.
mine still didn't fix anything. plex still can't see anything inside the folder. But I can go into terminal and see everything. despite having --allow-other setup. also which version of the plugin are you using? as the Waseh version of it isn't fixed for me?
-
On 7/27/2020 at 11:02 AM, rzeeman711 said:
Thanks for sharing this here. Rclone is working for me again. For anyone else that comes here looking for a solution, you just need to reboot unraid and the rclone plugin will be updated with the fix.
how did you update your plugin? mine still shows
2019.11.01 for the latest version of the beta plugin.
-
On 7/27/2020 at 11:02 AM, rzeeman711 said:
Thanks for sharing this here. Rclone is working for me again. For anyone else that comes here looking for a solution, you just need to reboot unraid and the rclone plugin will be updated with the fix.
it won't show without the reboot?
-
So I have done the full install, and unraid mounts the gdrive, but I can't see anything in it via plex, or anywhere in unraid. UNLESS I use a terminal in which case I can see the files listed there from the unraid instance. But any docker container cannot see it. Any help would be greatly appreciated. --Allow-other is in the script (provided from the github), and any areas where my naming scheme is required are there. Let me know if any logs would be helpful.
TIA! -
So I have done the full install, and unraid mounts the gdrive, but I can't see anything in it via plex, or anywhere in unraid. UNLESS I use a terminal in which case I can see the files listed there from the unraid instance. But any docker container cannot see it. Any help would be greatly appreciated. --Allow-other is in the script (provided from the github), and any areas where my naming scheme is required are there. Let me know if any logs would be helpful.
TIA! -
any of this still available? interested in the 10gbe nics
[Plugin] NUT v2 - Network UPS Tools
in Plugin Support
Posted
So for the most part I have NUT working... in the background. But I can't see anything in neither the stats page or the main nuts page giving me information about the UPS's. The config works and is running from what I can tell from the logs.
I'm wondering why it doesn't show? although it reads info, batteries etc just fine when running upsc device@host