6.11 update > EDID block 0 is all zeroes
This is one of a handful of challenges I'm facing since upgrading from 6.10.3 to 6.11. I'm starting with what I hope is low hanging fruit.
Since upgrading, my log is flooded with "kernel: EDID block 0 is all zeroes"
I have a supermicro X11SSH-F motherboard with an e3-1285v6. I hardware transcode with the i915 igpu for plex.
So far, I've tried recommendations in posts to blacklist the i915 driver (I don't know if this would disable HW transcoding in plex, but i
I have a VGA monitor connected to my server. It does not stop the errors which hit the log every 2 seconds
Sep 26 09:59:28 MediaNAS kernel: EDID has corrupt header
Sep 26 09:59:28 MediaNAS kernel: EDID block 0 is all zeroes
I have an AST (IPMI) on the server and iGPU in the E-2288G processor. I can't blacklist either as I use iGPU for transcoding and AST for KVM access to server via IPMI.
Hopefully this gets fixed soon. The problem was not present in 6.10