Hi so i decided to create a thread for this as I can't find any working solution.

I tried removing the <hyperv> </hyperv> block as some suggested here.

I have tried binding my video card to VFIO.

 

Nothing seems to work.

This VM was perfectly working in 6.9.2 .

 

attached are my diagnostics.

 

Let me know if I missed anything. 

"Windows" VM is the 6.9.2 created VM - not working in 6.11.5
"Windows 10" VM is the 6.11.5 created VM -  not working

 

hope to hear from you soon.. someone help to point me to a direction

unraid-diagnostics-20221125-2235.zip

I'm having similar issues. You're not alone.

 

 

 

 

thanks for that, it's really is frustrating.

 

For what it's worth, my IOMMU grouping has been different since I upgraded to 6.11.5.

 

In 6.9.2, my Video card  Gtx 1070 was grouped in the same IOMMU for both Graphics and audio, with the acs_override set to both. 

In 6.11.5, the same video card, the graphics is in 1 group and the audio is in another group, with the acs_override set to both.

 

don't really have anything else here.. hopefully someone can give an advice on how to fix this. 

Hi, 
I have been reading a lot, but I can't find any document or discussion whether an upgrade from 6.9.2 to 6.11.5 is discouraged.  I'm still stuck to not being able to run my windows 10 VM. 

 

Would anyone be able to advise if this wiki below:

https://wiki.unraid.net/Manual/VM_Management#Step_1:_Preparing_the_disk

is necessary for 6.11.5 only? as i did not perform this in 6.9.2, I only followed spaceinvader's guides to make my baremetal into a VM.

 

hoping for anyone to help point into a direction. 

 

thanks in advance.