Jump to content
Sign in to follow this  
TheStapler

strange errors

3 posts in this topic Last Reply

Recommended Posts

Jul  8 03:31:56 unRAID kernel: ata1.00: exception Emask 0x50 SAct 0x7800 SErr 0x400800 action 0x6 frozen (Errors)

Jul  8 03:31:56 unRAID kernel: ata1.00: irq_stat 0x08000000, interface fatal error (Errors)

Jul  8 03:31:56 unRAID kernel: ata1: SError: { HostInt Handshk } (Errors)

Jul  8 03:31:56 unRAID kernel: ata1.00: failed command: WRITE FPDMA QUEUED (Minor Issues)

Jul  8 03:31:56 unRAID kernel: ata1.00: cmd 61/e0:58:bf:d6:51/03:00:09:00:00/40 tag 11 ncq 507904 out (Drive related)

Jul  8 03:31:56 unRAID kernel:          res 40/00:70:e7:dd:12/00:00:0e:00:00/40 Emask 0x50 (ATA bus error) (Errors)

Jul  8 03:31:56 unRAID kernel: ata1.00: status: { DRDY } (Drive related)

Jul  8 03:31:56 unRAID kernel: ata1.00: failed command: WRITE FPDMA QUEUED (Minor Issues)

Jul  8 03:31:56 unRAID kernel: ata1.00: cmd 61/00:60:a7:da:51/04:00:09:00:00/40 tag 12 ncq 524288 out (Drive related)

Jul  8 03:31:56 unRAID kernel:          res 40/00:70:e7:dd:12/00:00:0e:00:00/40 Emask 0x50 (ATA bus error) (Errors)

Jul  8 03:31:56 unRAID kernel: ata1.00: status: { DRDY } (Drive related)

Jul  8 03:31:56 unRAID kernel: ata1.00: failed command: WRITE FPDMA QUEUED (Minor Issues)

Jul  8 03:31:56 unRAID kernel: ata1.00: cmd 61/30:68:a7:de:51/01:00:09:00:00/40 tag 13 ncq 155648 out (Drive related)

Jul  8 03:31:56 unRAID kernel:          res 40/00:70:e7:dd:12/00:00:0e:00:00/40 Emask 0x50 (ATA bus error) (Errors)

Jul  8 03:31:56 unRAID kernel: ata1.00: status: { DRDY } (Drive related)

Jul  8 03:31:56 unRAID kernel: ata1.00: failed command: READ FPDMA QUEUED (Minor Issues)

Jul  8 03:31:56 unRAID kernel: ata1.00: cmd 60/00:70:e7:dd:12/02:00:0e:00:00/40 tag 14 ncq 262144 in (Drive related)

Jul  8 03:31:56 unRAID kernel:          res 40/00:70:e7:dd:12/00:00:0e:00:00/40 Emask 0x50 (ATA bus error) (Errors)

Jul  8 03:31:56 unRAID kernel: ata1.00: status: { DRDY } (Drive related)

Jul  8 03:31:56 unRAID kernel: ata1: hard resetting link (Minor Issues)

Jul  8 03:31:57 unRAID kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) (Drive related)

Jul  8 03:31:57 unRAID kernel: ata1.00: configured for UDMA/133 (Drive related)

Jul  8 03:31:57 unRAID kernel: ata1: EH complete (Drive related)

 

 

I am not sure what is going on here, but as you can see, I am getting these error... I am not quite sure where the issue is, or if it is a drive, or controller issue?

 

I am running an ASROCK A785GM-LE/128M mother board, with an athlon x640 processor, it has 6 onboard SATA ports, and then I have 2x VANTEC UGT-ST310R controller cards (PCI 4port sata).

 

I've never had any issue, until last week when I changed my case out for a better air flowing case, then for some reason, i had a drive failure (ended up with TONNES of errors), so I swapped the drive out, and it rebuilt fine.  I am in the midst of preclearing another drive as I have < 200GB free in the array

 

oh yeah, my array consists of 9 (soon to be 10) WD20EARS drives (jumpered 7/8) and a single 160GB sata drive I use as my download drive (not attached to the array)

 

Any pointers in the right direction to why i am getting these errrors, or what you think they are... would be helpful.

 

thanks in advance!

 

TheStapler  (steve)

Share this post


Link to post

Jul  8 03:31:57 unRAID kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) (Drive related)

 

This is indicating you have a SATA cable problem, assuming the drive is connected to a SATA II or SATA III port. Try a new SATA cable.

 

Peter

 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this