ssnow Posted June 23, 2023 Share Posted June 23, 2023 Hello! I've tried upgrading from 6.11.5 to 6.12.0 and 6.12.1 but have downgraded due to my Home Assistant VM not getting an IP. In 6.12.0, the VM tab would stay blank. In 6.12.1, I can get to the VM configuration but the same settings seem to result in the VM not having network connectivity. I confirmed the MAC is correct to receive the correct IP from the DHCP reservation on my router. I'm not sure if there is some other setting needed to get this working. Any help appreciated! unraid-diagnostics-20230622-1735.zip Quote Link to comment
ssnow Posted June 23, 2023 Author Share Posted June 23, 2023 Ok. Did some comparisons between working (6.11.5) and non-working (6.12.1) .xml for the VM and found the below discrepancy for interface config. Does a target need to be specified for the interface to come up? Working in 6.11.5 <interface type='bridge'> <mac address='52:54:00:fb:e1:91'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio-net'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </interface> Not working in 6.12.1 <interface type='bridge'> <mac address='52:54:00:fb:e1:91'/> <source bridge='br0'/> <model type='virtio-net'/> <address type='pci' domain='0x0000' bus='0x03' slot='0x00' function='0x0'/> </interface> Quote Link to comment
ssnow Posted July 4, 2023 Author Share Posted July 4, 2023 (edited) tried upgrading to 6.12.2 and still get the same issue attached diagnostics below. tried replacing interface configuration with working from 6.11.5 in XML, but it would be reverted upon save. is this just me? unraid-diagnostics-20230704-1038.zip Edited July 6, 2023 by ssnow Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.