GEEKYi Posted June 24, 2023 Share Posted June 24, 2023 求大佬指点,刚开始安装系统的时候装了一张千兆网卡四口和一张万兆网卡双口,现在千兆网卡不用了,如何把万兆网口的 eth5 和 板载的 2.5G eth6 端口名称更改为 eth1 和eth2?谢谢 Quote Link to comment
cdf5b9fac9ad Posted June 26, 2023 Share Posted June 26, 2023 U盘config文件夹里有个network-rule.cfg(后缀可能不对),打开就可以修改,然后重启 1 Quote Link to comment
VERKY Posted July 18, 2023 Share Posted July 18, 2023 On 6/27/2023 at 2:19 AM, cdf5b9fac9ad said: U盘config文件夹里有个network-rule.cfg(后缀可能不对),打开就可以修改,然后重启 正解! Quote Link to comment
dsj Posted July 25, 2023 Share Posted July 25, 2023 On 6/27/2023 at 2:19 AM, cdf5b9fac9ad said: U盘config文件夹里有个network-rule.cfg(后缀可能不对),打开就可以修改,然后重启 rule.cfg里面的顺序就是ethX的顺序吗? Quote Link to comment
cdf5b9fac9ad Posted October 2, 2023 Share Posted October 2, 2023 On 7/25/2023 at 3:27 PM, dsj said: rule.cfg里面的顺序就是ethX的顺序吗? 你要根据说明或者mac地址确认对应的网口,然后自己改“NAME”字段的数字 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.