I have been having a weird issue where my new server completely locks up, no access to GUI or shares.

 

so far i have.

Ran memtest 8 x full test Passed

Changed Ram anyway since i had spare

Changed the NIC to another Mellonx ConnectX-3 (Known Good)

disabled the Realtek NIC in Bios

Completely reflashed and fresh installed a second time

added to flash Uraid OS append initrd=/bzroot pcie_aspm=off to fix another error that was popping up in syslog

And it was still locking up

I have Changed Ram again from another system that I know is good and now have a remote logger running

This was all I caught from the  last log

 

Sulaco Log 1.txt

 

I will add more logs if it continues with the New New Ram

 

Any Ideas?

 

Model:Custom

M/B:ASUSTeK COMPUTER INC. TUF B450M-PLUS GAMING Version Rev X.0x

BIOS:American Megatrends Inc. Version 4401 Dated 09/04/2023

CPU:AMD Ryzen 7 2700X Eight-Core @ 3700 MHz

HVM:Enabled

IOMMU:Enabled

Cache:L1 - Cache: 768 KiB, L2 - Cache: 4 MiB, L3 - Cache: 16 MiB

Memory:16 GiB DDR4 (max. installable capacity 128 GiB)

Network:eth0: 10000 Mbps, full duplex, mtu 1500

Kernel:Linux 6.1.74-Unraid x86_64

OpenSSL:1.1.1v

 

 

Edited March 23, 20242 yr by Smaksum
Solved

Looks like the New New Ram fixed it have rsynced 10 TiB to my other server in the last 6 hours, No errors in syslog and still up and running. looks like i have 2 sets of ram with a bad stick or the Motherboard doesn't like the GSkill FlareX any more after BIOS update. Going to have to put it in another board and beat it to death with memtest for a few days.