Drive on the blink?

[Kandinsky]

Could someone please advise if these drive errors on a new 3Tb Tosh drive are something to be concerned about?

 

ATA Error Count: 1633 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1633 occurred at disk power-on lifetime: 582 hours (24 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 21 37 a1 5b 01

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 00 d8 a0 5b 40 00   2d+06:06:13.068  READ FPDMA QUEUED
  60 b0 00 a8 dc 5b 40 00   2d+06:06:12.971  READ FPDMA QUEUED
  60 50 00 58 dc 5b 40 00   2d+06:06:12.970  READ FPDMA QUEUED
  60 08 00 d0 37 4a 40 00   2d+06:06:12.970  READ FPDMA QUEUED
  60 00 00 58 d8 5b 40 00   2d+06:06:12.895  READ FPDMA QUEUED

Error 1632 occurred at disk power-on lifetime: 582 hours (24 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 91 2f e1 4c 01

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 c0 e0 4c 40 00   2d+06:02:13.271  READ FPDMA QUEUED
  60 70 00 50 dd 4c 40 00   2d+06:02:13.082  READ FPDMA QUEUED
  60 90 00 c0 dc 4c 40 00   2d+06:02:13.081  READ FPDMA QUEUED
  60 08 00 18 34 4a 40 00   2d+06:02:13.081  READ FPDMA QUEUED
  60 00 00 c0 d8 4c 40 00   2d+06:02:13.002  READ FPDMA QUEUED

Error 1631 occurred at disk power-on lifetime: 536 hours (22 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 f1 ff 51 c4 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 f0 4f c4 40 00      08:21:06.684  READ FPDMA QUEUED
  60 00 00 f0 4b c4 40 00      08:21:06.682  READ FPDMA QUEUED
  60 00 00 f0 47 c4 40 00      08:21:06.679  READ FPDMA QUEUED
  60 00 00 f0 43 c4 40 00      08:21:06.676  READ FPDMA QUEUED
  60 00 00 f0 3f c4 40 00      08:21:06.673  READ FPDMA QUEUED

Error 1630 occurred at disk power-on lifetime: 536 hours (22 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 ef 81 04 03

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 f0 7f 04 40 00      08:20:58.973  READ FPDMA QUEUED
  60 00 00 f0 7b 04 40 00      08:20:58.970  READ FPDMA QUEUED
  60 00 00 f0 77 04 40 00      08:20:58.966  READ FPDMA QUEUED
  60 00 00 f0 73 04 40 00      08:20:58.963  READ FPDMA QUEUED
  60 00 00 f0 6f 04 40 00      08:20:58.960  READ FPDMA QUEUED

Error 1629 occurred at disk power-on lifetime: 536 hours (22 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 91 d7 41 dc 03

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 68 40 dc 40 00      08:20:56.149  READ FPDMA QUEUED
  60 00 00 68 3c dc 40 00      08:20:56.147  READ FPDMA QUEUED
  60 00 00 68 38 dc 40 00      08:20:56.143  READ FPDMA QUEUED
  60 00 00 68 34 dc 40 00      08:20:56.140  READ FPDMA QUEUED
  60 00 00 68 30 dc 40 00      08:20:56.136  READ FPDMA QUEUED