Drive on the blink?


Recommended Posts

Could someone please advise if these drive errors on a new 3Tb Tosh drive are something to be concerned about?

 

ATA Error Count: 1633 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1633 occurred at disk power-on lifetime: 582 hours (24 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 21 37 a1 5b 01

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 80 00 d8 a0 5b 40 00   2d+06:06:13.068  READ FPDMA QUEUED
  60 b0 00 a8 dc 5b 40 00   2d+06:06:12.971  READ FPDMA QUEUED
  60 50 00 58 dc 5b 40 00   2d+06:06:12.970  READ FPDMA QUEUED
  60 08 00 d0 37 4a 40 00   2d+06:06:12.970  READ FPDMA QUEUED
  60 00 00 58 d8 5b 40 00   2d+06:06:12.895  READ FPDMA QUEUED

Error 1632 occurred at disk power-on lifetime: 582 hours (24 days + 6 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 91 2f e1 4c 01

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 c0 e0 4c 40 00   2d+06:02:13.271  READ FPDMA QUEUED
  60 70 00 50 dd 4c 40 00   2d+06:02:13.082  READ FPDMA QUEUED
  60 90 00 c0 dc 4c 40 00   2d+06:02:13.081  READ FPDMA QUEUED
  60 08 00 18 34 4a 40 00   2d+06:02:13.081  READ FPDMA QUEUED
  60 00 00 c0 d8 4c 40 00   2d+06:02:13.002  READ FPDMA QUEUED

Error 1631 occurred at disk power-on lifetime: 536 hours (22 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 f1 ff 51 c4 0e

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 f0 4f c4 40 00      08:21:06.684  READ FPDMA QUEUED
  60 00 00 f0 4b c4 40 00      08:21:06.682  READ FPDMA QUEUED
  60 00 00 f0 47 c4 40 00      08:21:06.679  READ FPDMA QUEUED
  60 00 00 f0 43 c4 40 00      08:21:06.676  READ FPDMA QUEUED
  60 00 00 f0 3f c4 40 00      08:21:06.673  READ FPDMA QUEUED

Error 1630 occurred at disk power-on lifetime: 536 hours (22 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 ef 81 04 03

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 f0 7f 04 40 00      08:20:58.973  READ FPDMA QUEUED
  60 00 00 f0 7b 04 40 00      08:20:58.970  READ FPDMA QUEUED
  60 00 00 f0 77 04 40 00      08:20:58.966  READ FPDMA QUEUED
  60 00 00 f0 73 04 40 00      08:20:58.963  READ FPDMA QUEUED
  60 00 00 f0 6f 04 40 00      08:20:58.960  READ FPDMA QUEUED

Error 1629 occurred at disk power-on lifetime: 536 hours (22 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 91 d7 41 dc 03

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 68 40 dc 40 00      08:20:56.149  READ FPDMA QUEUED
  60 00 00 68 3c dc 40 00      08:20:56.147  READ FPDMA QUEUED
  60 00 00 68 38 dc 40 00      08:20:56.143  READ FPDMA QUEUED
  60 00 00 68 34 dc 40 00      08:20:56.140  READ FPDMA QUEUED
  60 00 00 68 30 dc 40 00      08:20:56.136  READ FPDMA QUEUED

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.