August 28, 201411 yr So I just found some errors in the Disk error Log area of the Disk Health page for one of my disks. I am not great at reading these errors and understanding the severity of them. I have pasted the errors below. Should I replace this disk? Or is this normal? ATA Error Count: 67 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 67 occurred at disk power-on lifetime: 26486 hours (1103 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bb 4c a9 9e 00 Error: UNC 187 sectors at LBA = 0x009ea94c = 10398028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 07 a6 9e e0 08 24d+21:25:30.150 READ DMA EXT 27 00 00 00 00 00 e0 08 24d+21:25:29.703 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 08 24d+21:25:29.579 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 24d+21:25:29.460 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 08 24d+21:25:29.458 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 66 occurred at disk power-on lifetime: 26486 hours (1103 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bb 4c a9 9e 00 Error: UNC 187 sectors at LBA = 0x009ea94c = 10398028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 07 a6 9e e0 08 24d+21:25:09.712 READ DMA EXT 27 00 00 00 00 00 e0 08 24d+21:25:09.256 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 08 24d+21:25:09.133 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 24d+21:25:09.013 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 08 24d+21:25:09.011 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 65 occurred at disk power-on lifetime: 26486 hours (1103 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bb 4c a9 9e 00 Error: UNC 187 sectors at LBA = 0x009ea94c = 10398028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 07 a6 9e e0 08 24d+21:24:49.325 READ DMA EXT 27 00 00 00 00 00 e0 08 24d+21:24:48.870 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 08 24d+21:24:48.747 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 24d+21:24:48.627 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 08 24d+21:24:48.626 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 64 occurred at disk power-on lifetime: 26486 hours (1103 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bb 4c a9 9e 00 Error: UNC 187 sectors at LBA = 0x009ea94c = 10398028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 07 a6 9e e0 08 24d+21:24:28.939 READ DMA EXT 27 00 00 00 00 00 e0 08 24d+21:24:28.484 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 08 24d+21:24:28.361 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 24d+21:24:28.241 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 08 24d+21:24:28.240 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 63 occurred at disk power-on lifetime: 26486 hours (1103 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 bb 4c a9 9e 00 Error: UNC 187 sectors at LBA = 0x009ea94c = 10398028 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 07 a6 9e e0 08 24d+21:24:08.552 READ DMA EXT 27 00 00 00 00 00 e0 08 24d+21:24:08.037 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 08 24d+21:24:07.914 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 24d+21:24:07.794 SET FEATURES [set transfer mode] 27 00 00 00 00 00 e0 08 24d+21:24:07.793 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Archived
This topic is now archived and is closed to further replies.