Fonzarelli Posted May 4, 2015 Share Posted May 4, 2015 I recently noticed the system info in unmenu is showing the wrong speed of my processor CPU is 64 Bit Capable. CPU Info (from /proc/cpuinfo) processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 6 model name : AMD Athlon(tm) II X2 250 Processor stepping : 3 microcode : 0x10000b6 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save bogomips : 6027.46 clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 1 vendor_id : AuthenticAMD cpu family : 16 model : 6 model name : AMD Athlon(tm) II X2 250 Processor stepping : 3 microcode : 0x10000b6 cpu MHz : 800.000 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save bogomips : 6027.46 clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate Sensor info (from /usr/bin/sensors) atk0110-acpi-0 Adapter: ACPI interface Vcore Voltage: +1.04 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +4.92 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +12.09 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 2445 RPM (min = 600 RPM) CHASSIS FAN Speed: 0 RPM (min = 600 RPM) POWER FAN Speed: 0 RPM (min = 600 RPM) CPU Temperature: +35.0 C (high = +60.0 C, crit = +95.0 C) MB Temperature: +42.0 C (high = +45.0 C, crit = +75.0 C) k10temp-pci-00c3 Adapter: PCI adapter temp1: +26.0 C (high = +70.0 C, crit = +99.5 C) Shouldn't the cpu MHz be 3000 for this processor? Could this be causing performance issues? Im running unraid v5.0.6 Link to comment
dirtysanchez Posted May 4, 2015 Share Posted May 4, 2015 It's shows the current speed of the individual CPU cores at the time you clicked the button, at least on my server. Put the server under load and see if the speed increases. Link to comment
Fonzarelli Posted May 5, 2015 Author Share Posted May 5, 2015 ahhh... Thanks that makes sense Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.