I have an Intel Xeon x3450 cpu which has a base clock of 2.66Ghz and using Turbo Boost 1.0 it goes up to 3.2 Ghz. In unRAID is there a way to view my clock speed to verify that turbo boost is working? Also, when I run a windows 10 vm I notice that my cpu is always at the same clock speed, for me its always at 2.66Ghz even when the machine is at idle? Is there a way to allow the cpu to lower the clock speed when the maximum is not needed? I read another thread from last month regarding turbo boos
I have one of those boards with a Xeon X3430 (2.4GHz base, 2.8Ghz boost) so was curious to check it, according to /proc/cpuinfo my CPU was also not boosting, so did some googling and apparently and I quote:
http://askubuntu.com/questions/37618/is-turbo-boost-working
We don't have turbostat so I did this test:
-1st check boost is on with:
cat /sys/devices/system/cpu/cpufreq/boost
1=on and 0=off
-if it's on run a simple CPU speed test:
time $(i=0; while ((