Error while enabling write cache | Version 6.8.3

The Fix common problems plugin alerted me to a warning, "You may experience slow read/writes to cache2." Attempts to fix the issue are unsuccessful and a `SG_IO: bad/missing sense data` error is shown.

I ran the first command to get an understanding of the drive then the next to enable write caching, unsuccessfully. Any advice on fixing this issue?

root:~# hdparm -I /dev/disk/by-id/ata-WDC_WD10EARX-00N0YB0_WD-WMC0T0478211

/dev/disk/by-id/ata-WDC_WD10EARX-00N0YB0_WD-WMC0T0478211:

ATA device, with non-removable media
        Model Number:       WDC WD10EARX-00N0YB0
        Serial Number:      WD-WMC0T0478211
        Firmware Revision:  51.0AB51
        Transport:          Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0

root@:~# hdparm -W 1 /dev/disk/by-id/ata-WDC_WD10EARX-00N0YB0_WD-WMC0T0478211

/dev/disk/by-id/ata-WDC_WD10EARX-00N0YB0_WD-WMC0T0478211:
 setting drive write-caching to 1 (on)
SG_IO: bad/missing sense data, sb[]:  70 00 05 00 00 00 00 0a 04 61 40 00 21 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 write-caching =  0 (off)