knowpistons
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by knowpistons
-
-
Yes, it is not showing up, it is a DELL LSI 9206-16e 1V1W2 TFJRW. Today the rest of my drives came up could not read
-
Question 1: So the other day I reset the BIOS on my MoBo on accident, I thought I set everything as I did before but now all the drives connected to the Marvell 9230 controller are having errors 2 have read errors and 1 drive has been disabled. When I removed the disabled drive and attempt to rebuild, it gets to 50-75% and then fails again. All smart tests have passed, VT-D is disabled, iommu=pt, has been added to SYSLINUX Config. Is there a setting in the BIOS that I forgot to enable or disable?
Question 2: The Marvell controller would be a moot point if my SAS card was detected, I have a drive connected to it but it does not show anywhere. Is there something else I need to do in Unraid, BIOS or to the card itself to get this working?
-
Nevermind, Unassigned devices was not installed for some reason. Something else wierd though, the mover will not run.
-
I updated to 6.11.5 CA is back but I cannot mount any of the unassigned devices, which is a problem as that is where my appdata for my dockers is housed.
-
If I could get community applications back I think that would allow me to reinstall unassigned devices
-
About a week ago my server completely locked up, I could not reach it via web, ssh or direct. It would not shut down with the power button or via the UPS running out of power so it eventually just lost power. When I restarted it, community applications said there was an update so I decided to update it, then the community applications tab disappeared. It was running a parity check and I have been EXTREMELY fed up with my server so I just said fuck it.
Today nothing was working again so I cut power again, this time, community applications is still gone, even after trying to reinstall it, and unassigned devices is also gone. The biggest problem is all of my dockers are on an unassigned device, so there is no way for me to get it back. Any help would be much appreciated.
-
So the issue was a plugin, I uninstalled all my plugins and then was able to successfully update to 6.9.2. I am in the process of reinstalling the plugins but it is going so SLOW that it may take till next week. I don't know why its going so slow or what Plugin caused my problems. Here are he list of my plugins.
Appdata BackupRestore v2
Appdata Cleanup
Auto Update Applications1
Community Applications
Config file editor
Dynamix Cache Dirs
Dynamix SCSI Devices
Dynamix SSD Trim
Dynamix System Autofan
Dynamix System Info
Dynamix System Stats
Dynamix System Temp
Dynamix wireguard
Fix Common problems
Nerd Pack
Preclear disk
Tips and Tweaks
Unassigned devices + addon
Unbalance
User Scripts
Even the diagnostics file took a LOT longer to download than it usually does.
-
When I start the array everything stops, there is no display out, and the Web GUI freezes. I have tried multiple versions of 6.9 and have the same problem in all of them.
-
4 hours ago, binhex said:
most probably an out of date ovpn file, check your vpn provider, this from your log indicates cert issues:-
2021-09-14 01:56:07 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) 2021-09-14 01:56:07 TLS Error: TLS handshake failedThat worked, thank you
-
My container will not start up if I have the VPN enabled, the problem started a week ago. I am using nordVPN nothing has changed in the past 6 months but all of a sudden it isn't working. What can I do to get this working again?
-
So that controller is built into my motherboard, is there any settings I can tweak either in the BIOS or Unraid to make it work temporarily, my MB is an ASUS Z87WS. I bought a DELL LSI 9206-16e SAS controller for future drive expansion but I think I need to do some configuration on that, of which I am clueless on, before I can use it.
When I tried to upgrade to version 6.9 I was not able to and had to go back to 6.8.3 and now in the docker tab, under "version" every one of them say "not available". Could these problems also be linked to this controller?
-
I have been having a problem with disk 3 in my array. It continuously "errors out" despite being new, having a perfect SMART report, and not having any errors on pre-clear. I have done this with the same results while also trying multiple drives, power cords, sata ports, and sata cables. When this happens it also tells me that disk 2 and disc 4 also have errors but after I restart the server the only disc that still has errors in disk 3.
-
I have tried both and it completely freezes on both, in GUI it freezes in the login screen, in no GUI mode text comes up and the last thing on the screen is. ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
-
-
Yes, it will not boot in 6.9, so I am unable to get diagnostics.
-
Ok, so after getting everything back up and running, ran a parity check, went through and cleaned anything that could cause a problem, I tried both methods to upgrade, first backing up the flash this time, and had the same exact issues. I looked at my system log and saw some warnings and errors. I have attached the system log as well as the new diagnostic.
big-savy-diagnostics-20210413-2116.zip big-savy-syslog-20210414-0116.zip
-
I got Plex to work doing a fresh install (not from previous applications via community applications). Everything is working on version 6.8.3 besides GPU transcoding, I would like to be able to upgrade to the latest version to get this working as well.
-
Yes, but first I need to figure out how to upgrade to 6.9
-
I did that, then restored the appdata folder, deleted everything that has to do with Nvidia including the plex container. I then ran the update assistant and it says it should be good so I turned the server off, backed up the flash drive and tried to update again... same problems. I then restored the the flash drive with the nvidia plugins in hopes to get plex working with the graphics card transcoding. I finally got it to work, doing a fresh install, no hardware accelerated transcoding, as the unraid plugin will not work, I assume because I am not running an Unraid Nvidia build anymore. I would like to be able to upgrade to the new version and be able to use my graphics card for hardware accelerated transcoding.
-
Linux server. How do I just go back to where it was on Sunday before all this hell started.
-
No, all the other dockers are working
-
Great, Plex still isn't working
-
When I set up the USB stick I could not remember if I set a custom name, ip address, or enabled UEFI boot so I only checked UEFI boot. When I put it in my computer my bios reset, so that was interesting reconfiguring that but I got it working on 6.8.3 with your instructions, Thank you. Oddly, it didn't even detect an unclean shutdown but I started a parity check just incase. Now what am I supposed to do about upgrading?
-
Yes, I have tried both ways and deleting nerd pack, same thing happens, in GUI mode it freezes on the login screen and in headless mode the login prompt comes up and then the a ton of text comes on the screen and freezes, no access to GUI, keyboard doesn't work, the last thing on the screen is ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
[Support] Linuxserver.io - Plex Media Server
in Docker Containers
Posted · Edited by knowpistons
update
I am getting "Execution error Server error" when trying to start Plex. I have tried to recreate the docker folder and even restore appdata to no avail. I tried messing with some settings but I keep getting "command failed" and this error
I also rolled back the nvidia driver as well.
What could the problem be?