Disk 2 in my array red-balled, so I shut down and replaced it with a spare 2TB HDD I had lying around.
When I booted up, it showed a blue ball next to disk 2 and says "disabled disk replaced" and "Start will bring the array on-line, start Data-Rebuild, and then expand the file system (if possible)." I click the check box saying "I'm sure I want to do this and it looks like the drives are Mounting, but instead of rebuilding the data onto the new disk, it then tells me that a "New parity disk installed." and clicking "Start will bring the array on-line and start Parity-Sync." Disk 2 is now red-balled.
My concern is that it's exactly the same parity disk I've had all along. There's been no change to cabling or anything else. I'm worried that if I click start, I'll actually lose all the data on disk 2.
If I fire up my tower with disk 2 disconnected, it says configuration valid and says disk 2 is "not installed". There's the option to click start however "Start will bring the array on-line (array will be unprotected)." When I click start, it looks like the drives are mounting, but then stops and goes back to the exact same screen.
I was just going to try replacing disk 2 with a brand new drive, and do the rebuild again, but if anyone knows what's going on or whether it would be safe to click Start on this second stage without losing any data, I'd really appreciate an explanation or some help.
Sorry for being a n00b, but I don't know how to post a syslog. I do know that I'm running version 4.5.4 though.
Thanks in advance,
Mike
PS - I've done a quick search and found 1 or 2 threads that seemed similar, but I couldn't really follow what the solution was.
http://lime-technology.com/forum/index.php?topic=15770.msg147005#msg147005
http://lime-technology.com/forum/index.php?topic=15088.0