doobiedo

Members
  • Posts

    6
  • Joined

Converted

  • Gender
    Undisclosed

doobiedo's Achievements

Noob

Noob (1/14)

0

Reputation

  1. Cheers for the info BRiT, just upgraded my card to FW: 01.30.05.00 Bios: 06.30.00.00
  2. Cheers for this, I'll install it tonight and report back Ok its installed, as of yet there have been no errors when files are written to the array, what is missing are the drive temps for the drives connected to the br10i, they were present in the first version. Are you sure about the drive temperatures, as they have been missing on all the version I have tested on my BR10i. Pretty positive the temps were there but I'll switch back to the first version tonight just to make sure. Well I've just checked the first version and I take everything back, no temps here nothing to see, my mistake Thanks once again to SK
  3. Cheers for this, I'll install it tonight and report back Ok its installed, as of yet there have been no errors when files are written to the array, what is missing are the drive temps for the drives connected to the br10i, they were present in the first version.
  4. Could someone point me in the right direction for the actual firmware for a BR10i version 44E8690, I've only found the firmware revision for the 44E8689 version. Currently running version 2.66 but the 44E8689 newest firmware is Version 7.72 Critical Thanks
  5. Hello, I'm currently running my unRaid Server under ESXi 4.1 (hardware see sig.) using VMDirectpath for all unRaid drives. 6 via the onboard sata and the other 6 via the Br10i, the ESXi drive is connected to the Promise sata300 TX4 card. Using the official unRaid version the configuration works apart from the device ids, temps, spin down. Using the first bzimage/bzroot files from SK, I recieved a lot of error messages when files were written to the drives connected to the BR10i, the cache drive is attached to the onboard sata. When the files are moved to the raid then the "errors" counter starts to rise. Device ids and temps work. Using the second bzimage/bzroot files from SK, all the drives attached to the BR10i came up as unformatted, plus I'm still getting errors and no temps. Both times I copied the bzimage/bzroot files directly to the USB drive. Syslog is attached, If there is any further information required just ask and thanks for the great forum. syslog-2010-12-05.zip