tramco

OK, I ran Select Utils->New Permissions with no luck. Rebooted and "Tower" is running parity again. Does anyone have a suggestions on which app to use?

Are talking about disk7 or the four I removed? If it is the four, it will have to wait until after work for me to install them. P.S. At the terminal windows, I too am seeing stat permission errors when I try to access the folders.

@bjp999 Using MC, I selected all shared folders and moved from the mounted single old drive (4x) to \user and yes the disk in question took longer then the other three @trurl syslog attached syslog.txt

Please see attachments. Wanted to remove four similar drives and add a one-off (removal was to ease system slowness due to older SATA controller which I also removed) What I did was: reset the drive assignments that unRAID uses and created a new config added the drives that I wanted to KEEP to a ‘new’ array mounted each of the removed drives and used MC to move data to new config (mkdir /mnt/olddrive and mount /dev/sdl1 /mnt/olddrive) powered system down and pulled drives powered system up and ran parity-sync symptoms include no Webgui shares and no UNC shares and current shares cannot be re-created. I can access shares from each drive I have the old drives handy and a screenshot of the original config. If I am hosed, please don't try to sugar coat it.

Already answered http://lime-technology.com/forum/index.php?topic=29204.msg269230#msg269230

I am having the same/similar issue with ver. 5.0 and the new WebGUI. My Mover schedule setting reset when doing a manual "Move now"

I am currently running 1.0.11 on ver 5.0 with no issues. Hope this helps

You could also try Robocopy instead of Windows File Manager. List of options and examples can be found here http://ss64.com/nt/robocopy.html I use variations of this in command prompt. ROBOCOPY \\10.XX.XX.18\Folder \\10.XX.XX.20\Folder /COPY:DT /DCOPY:T /E /Z /XO /ETA Command - ROBOCOPY Source - \\10.XX.XX.18\Folder Destination - \\10.XX.XX.20\Folder Source options (Must be used with UnRaid) - /COPY:DT http://lime-technology.com/forum/index.php?topic=19829.msg176401#msg176401 Source options - /DCOPY:T : Copy Directory Timestamps Source options - /E : Copy Subfolders, including Empty Subfolders Copy options - /Z : Copy files in restartable mode (survive network glitch) Advanced options - /XO : eXclude Older - if destination file exists and is the same date or newer than the source - don’t bother to overwrite it Advanced options - /ETA : Show Estimated Time of Arrival of copied files (Not needed but nice) Hope it helps

That's great news Tom, thanks for keeping the board informed of your progress. Looking forward to the 64bit release.

For what it is worth, I have been using a licensed version since 5.0-rc1 and have not one problem with it. As you can see from my System Info below, my build is pretty basic running AirVideo, PyTivo, Subsonic and Simplefeatures 1.05. Thanks to limetech (Tom) and the rest of you for making things work for those of us who haven't a clue.

StanC, Go to Pg 80 and dnload plugin from speeding_ant posted June 14, 2012, 04:46:49 PM and unzip then save to /boot/config/plugins Telnet to Tower or whatever name given and run the following installplg /boot/config/plugins/simpleFeatures.log.viewer-1.0.5-noarch-1.plg Once done, do a page refresh and the icon should appear.

speeding_ant Is the "SimpleFeatures" Plugin - Log Viewer **New Release** ICON a preview of things to come? I noticed that it is spruced up some. BTW - PLG install works, like the new feature

Thanks eroz, do you or anyone else have a favorite image hosting site?

How do I post an image in a post. Yes, I know; I'm a FNG (F'n New Guy) "img /img" what fills the space in between

Habey EMC-600B http://www.newegg.com/Product/Product.aspx?Item=N82E16811321014