-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by mark seaton
-
-
12 minutes ago, Nodiaque said:
ah now we can see in this log that it's started and waiting
so that means it is running fine? or waiting to start?
-
Its in Bridge mode
root@Tower:~# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
d3d6abe41d10 nodiaque/steamcmd:enshrouded_proton "/opt/scripts/start.…" 56 minutes ago Up 4 minutes 0.0.0.0:15636-15637->15636-15637/udp, :::15636-15637->15636-15637/udp Enshrouded_Proton -
Cant see game server using ether build in game browser or steam browser, I have tried pinging the ports and there is no response.
I can ping my unraid server ip fine but not the docker, I have tried stopping/Starting docker, rebooting unraid, and still nothing any help would be appreciated. Also there are no port conflicts as far as i can see.
C:\Users\mseat>ping 10.0.0.211:15636
Ping request could not find host 10.0.0.211:15636. Please check the name and try again.C:\Users\mseat>ping 10.0.0.211:15637
Ping request could not find host 10.0.0.211:15637. Please check the name and try again.C:\Users\mseat>ping 10.0.0.211
Pinging 10.0.0.211 with 32 bytes of data:
Reply from 10.0.0.211: bytes=32 time<1ms TTL=64
Reply from 10.0.0.211: bytes=32 time<1ms TTL=64
Reply from 10.0.0.211: bytes=32 time<1ms TTL=64
Reply from 10.0.0.211: bytes=32 time<1ms TTL=64Ping statistics for 10.0.0.211:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms -
On 7/21/2021 at 2:01 PM, ljm42 said:
Is that the server's LAN address?
If you connected with "remote access to server", then you will not have access to the LAN IP address. You need to use the server's tunnel IP listed in the webgui
If you want to access the server's LAN address then choose "remote access to LAN" instead.
I changed the connection to "remote access to Lan" and I still cant connect to the shares on my unraid server which has a LAN ip of 192.168.1.109, what am i missing?
Here is a screen shot of my settings, the blanked out is my duckdns
-
17 hours ago, ljm42 said:
So if the remote client is a Windows box you would go to the search bar and type:
\\10.252.1.1
and Windows would use SMB to connect to that IP address.
So if my unraid server was 192.168.1.109 and a share on it was say movies then in windows i would use
\\192.168.1.109\movies
and I would have to do this for each of my shares on my Unraid box
I can also Map Network drive in windows correct?
is the reason for this because Wiregard is a silent VPN and does not allow SMB and NTF broadcasting?
-
On 7/17/2021 at 8:20 PM, ljm42 said:
I'd recommend you go through the first two posts in the quickstart guide:
Ok I got access to my Unraid GUI remotely using remote access to server, but I don't see any of my shares on my server? am I missing some thing, do I need to port forward SMB or something as well?
-
On 7/18/2021 at 5:02 AM, itimpi said:
Have you switched to Advanced view using the toggle at the top-right?
Got it, wish I did not have to switch to advanced view everywhere in Unraid to see the delete button, I always forget were it is..
-
I watched a few videos on setting this up with unraid, I have duckdns setup, the port forwarding in my edge X router but i don't see any shares in my network remotely, says i am connected but nothing shows, also i cant figure out how to remove all the old settings with wireguard.
-
yeah 2nd this, this issue has been know for a bit and needs to be addressed
-
Better VM Graphics needs to be a priority, i have gone through 4 different computers and 3 different graphic cards all with mixed mostly failed results, and the videos by Spaceinvader and others are out of date and in those videos issues are pointed out that should have been addressed by now, and i have not found a updated list of supported tested hardware ether, the wiki by unraid is very out of date.
Unraid is looking less and less of a option for me unless the whole VM issues get fixed/updated
- 2
-
I just picked up a T410 to run a Windows/Mac VM with video card but i have not been able to get the video card to run in a VM, i always get its unavailable or busy.
Can you let me know what settings, hardware, and unraid version you are using?
[Support] Nodiaque - Gameserver docker
in Docker Containers
Posted
But i still cant connect to it or see it on steam servers? any idea why?