Dear Experts,
I have been getting quite frequent red balls on drives in my array which I wondered was down to the cables or something else? Could anyone please help me interpret the reports below with their advice on what I should do?
smartctl -a -d ata /dev/sdd
smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build)
Copyright © 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD204UI
Firmware Version: 1AQ10001
User Capacity: 2,000,398,934,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Nov 23 09:27:09 2012 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: (20880) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 067 064 025 Pre-fail Always - 10279
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 338
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 635
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 42
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 25027
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 165
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 062 000 Old_age Always - 17 (Min/Max 10/40)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 097 097 000 Old_age Always - 1654
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 1
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 346
SMART Error Log Version: 1
ATA Error Count: 49 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 49 occurred at disk power-on lifetime: 531 hours (22 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:01:25.206 IDENTIFY DEVICE
00 00 01 01 00 00 00 08 00:01:25.206 NOP [Abort queued commands]
00 00 01 01 00 00 00 00 00:01:25.206 NOP [Abort queued commands]
00 00 01 01 00 00 00 00 00:01:25.206 NOP [Abort queued commands]
ef 10 02 00 00 00 a0 08 00:01:25.201 SET FEATURES [Reserved for Serial ATA]
Error 48 occurred at disk power-on lifetime: 531 hours (22 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:01:25.185 IDENTIFY DEVICE
ec 00 00 00 00 00 a0 08 00:01:25.185 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:01:25.185 SET FEATURES [set transfer mode]
ef 10 02 00 00 00 a0 08 00:01:25.185 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 08 00:01:25.185 READ NATIVE MAX ADDRESS EXT
Error 47 occurred at disk power-on lifetime: 531 hours (22 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 4f c2 00 Error: ABRT
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
b0 d0 01 00 4f c2 00 08 00:01:25.182 SMART READ DATA
ef 10 02 00 00 00 a0 08 00:01:25.182 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 08 00:01:25.182 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:01:25.182 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:01:25.182 SET FEATURES [set transfer mode]
Error 46 occurred at disk power-on lifetime: 531 hours (22 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ec 00 00 00 00 00 a0 08 00:01:25.168 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:01:25.168 SET FEATURES [set transfer mode]
ef 10 02 00 00 00 a0 08 00:01:25.168 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 08 00:01:25.168 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:01:25.168 IDENTIFY DEVICE
Error 45 occurred at disk power-on lifetime: 521 hours (21 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 20 00 00 00 e0 Error: ICRC, ABRT 32 sectors at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 00 00 00 e0 08 00:19:51.839 READ DMA
ef 10 02 00 00 00 a0 08 00:19:51.839 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 08 00:19:51.839 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 08 00:19:51.839 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 00:19:51.839 SET FEATURES [set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 90% 515 -
# 2 Extended offline Aborted by host 80% 512 -
# 3 Extended offline Aborted by host 90% 511 -
# 4 Short offline Aborted by host 70% 341 -
# 5 Short offline Completed without error 00% 338 -
# 6 Short offline Completed without error 00% 338 -
# 7 Short offline Completed without error 00% 336 -
# 8 Short offline Completed without error 00% 335 -
# 9 Short offline Completed without error 00% 333 -
#10 Short offline Completed without error 00% 332 -
#11 Short offline Completed without error 00% 330 -
#12 Short offline Completed without error 00% 329 -
#13 Extended offline Aborted by host 80% 325 -
#14 Short offline Completed without error 00% 260 -
#15 Short offline Completed without error 00% 151 -
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Aborted_by_host [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.