Higs

AHA. THanks for that. I feel like an idiot. That was the previous settings from the Plugin (v5.X) days. Hadn't added a new show since the changeover. THANKS!

Recently upgraded from Unraid 5.X to 6.0 and moved from the plugins to Dockers. I thought I had everything setup properly between SAB, Sickbeard, Couchpotato, etc, especially since Sickbeard has been downloading new episodes of shows and processing them and putting them on the array. However, tonight I went to add a new TV Show to Sickbeard and apparently it can't: Unable to add show Unable to create the folder /mnt/user/TV/Quantum Leap, can't add the show I'm assuming this a "simple" permissions issue, but it seems to be kicking my butt. Now I thought I set the docker mappings properly (/tv -> /mnt/user/TV) and set them to Read/Write. I've tried CHMOD 755 for the folder, I've tried a couple other commands and nothing seems to fix the problem. Here is a quick capture of ls-l on the /mnt/user ... root@HigbeeRAID:/mnt/user# ls -l total 10469396 drwxrwxrwx 1 nobody users 48 Dec 22 16:29 Home_Movies/ drwxr-xr-x 1 nobody users 88 Jun 20 13:33 Movies/ drwxrwxrwx 1 nobody users 80 Feb 28 22:46 Music/ drwxrwxrwx 1 nobody users 104 Jun 20 21:05 TV/ drwxrwxrwx 1 nobody users 336 Jun 20 12:10 apps/ drwxrwxrwx 1 nobody users 72 Oct 31 2012 cachetmp/ -rw-rw-rw- 1 nobody users 10737418240 Jun 20 22:21 docker.img drwxrwxrwx 1 nobody users 136 Jun 7 14:47 downloads/ drwx------ 1 nobody users 160 Mar 3 04:21 lost+found/ drwxrwxrwx 1 nobody users 48 Jun 7 17:36 recordings/ drwxrwxrwx 1 nobody users 112 Jun 20 12:58 vms/ drwxrwxrwx 1 nobody users 328 Jun 20 12:56 vms_iso/ Any insight?

Thanks! Truly appreciate the help!

Just did a full reboot (it had trouble unmounting disks so I had to use the "powerdown" command), but it's up again and it found the TV share again. Everything looks like it's back to normal. That being said, would you mind review my syslog to see if there are anything issues (you mentioned the HDD issue, but I don't see any msgs related to it anymore). I've attached the syslog from after the latest restart. syslog-2015-03-02.txt

Squid, the rebuild-tree has finished on both drives. I stopped the array, and started back up outside of Maintenance mode. All the other shares came back, but still no "TV" share. Should I restart? Do I need to "readd" the share?

Thanks Squid. I have had a connector issue in the past (it was only half on) so I'll double check, and I do have a SATA card so I'll check that as well. Power supply should be ok, its a rather new Seasonic 650W unit (http://www.newegg.com/Product/Product.aspx?Item=N82E16817151118) with 54A on the single 12V rail. Any preference the order in which I run "rebuild tree"? md4 first, then cache? Vice versa? (Not having run it before, I don't know what to expect. Just going off the guidance from the Check Disk Filesystems Wiki page).

All, I'm not entirely sure when/where the problem(s) began. The first thing I noticed is that I had some SQL errors in SAB running on my cache drive. Nothing significant, the system could continue to run but with continual "warning messages". Then this morning, I went to move a file from the cache to one of my shares (TV), and apparently I goofed up. (mv file.ext /mnt/cache/TV with no final "/") After that, I could no longer access that share. The other shares were fine and seem unaffected. So I tried a restart of the system, but no luck. Again, the other shares were fine but now the system didn't even list a TV share (it previously listed it, but I couldn't access it). So I put the system in maintenance mode and starting running reiserfsck --check on the disks in my array (1-5), and #4 found a problem. (See attached log for md4) bad_directory_item: block 670864158: The directory item [19458 19470 0x53bcf980 DIR (3)] has a not properly hashed entry (10) bad_leaf: block 670864158, item 0: The corrupted item found (19458 19470 0x53bcf980 DIR (3), len 2464, location 1632 entrfinished Comparing bitmaps..finished Fatal corruptions were found, Semantic pass skipped 1 found corruptions can be fixed only when running with --rebuild-tree Additionally, I ran reiserfsck --check on my cache drive (/dev/sde1) and found problems: (see attached log for sde1) The left delimiting key [165220 165189 0x0 SD (0)] of the node (45763641) must be equal to the first element's key [165188 165189 0x0 SD (0)] within the node. / 5 (of 7//120 (of 131|/ 34 (of 170-block 115692534: The level of the node (50743) is not correct, (1) expected the problem in the internal node occured (115692534), whole subtree is skipped / 7 (of 7-/ 79 (of 114|/161 (of 170/bad_indirect_item: block 83081075: The item (800034 801871 0xbb69001 IND (1), len 4048, location 48 entry count 0, fsck need 0, format new) has the bad pointer (974) to the block (83084093), which is in tree already finished Comparing bitmaps..vpf-10640: The on-disk and the correct bitmaps differs. Bad nodes were found, Semantic pass skipped 2 found corruptions can be fixed only when running with --rebuild-tree I have syslogs from before the restart and after. Should I follow the reiserfsck recommends to rebuild-tree? What is wrong with my system? Should I "re-add" a share called "TV"? Thanks! Reiserfsck_-md4.txt Reiserfsck_-sde1.txt syslogs.zip

Guys, I've done some searching on the forums and wiki site, but I'm not seeing anything about this topic. If I missed it, just point me in the right direction. Thanks! I have a fairly generic Unraid setup, with a couple plugins. Unmenu, SimpleFeatures, Influencer's Sab/Sickbeard/Couch/etc, and Plex Media server. However, I've noticed that the system is unresponsive on a boot up/reboot until after all the "extra" plugins are loading. For instance, I can not reach the web GUI (http://tower) until all the plugins finish loading, and if for some reason there is a problem (GitHub is down and so things can't download or what not), then my system will just sit and wait, and never become responsive. (This make sense to a certain extent since SimpleFeatures replaces the basic web GUI, but bare with me) The question is, is that the normal/expected operation, or have I installed/configured things improperly? I would think the expected operation would have Samba and the basic WebGUI become operational first, and then worry about trying to load plugins. In my case, if the plugins fail, it can become a big issue since rebooting won't fix it (it will just hang in the same place until the plugin is fixed or removed). Does that make sense? Thanks!

Thanks Tom!

Pinch, Thanks for the great write up. I was able to skip the build/compile Kernel aspects since Botez posted a copy of his custom bzroot and bzimage for rc8a in the other thread. Have you been able to setup the rest of TVHeadend properly? EPG and what not?