Ranlothir

Well, it would appear that my NICs are dying. I am now getting the same issue in ESXi. It didn't start right away, but now that it has been back up for a few hours the system is no longer responding on the network. Pings are doing the same thing as well. New motherboard ordered. Please disregard.

I have a Dell R610 with 4 network ports in it. I have no issues with this server on other OSs (ESXI, Ubuntu, Windows Server 2012 R2, Windows Server 2019, etc.). With unraid on the other hand, I can ping out of the server with no issues, but incoming connections are intermittent at best and completely none existent at worst. The server will not get a DHCP address at all with a new install (even tried a new USB drive) and when I assign a static to the NICs they can be reached sometimes, but not others. The server responds to pings once every 40 seconds at <1ms - 385ms (this is across a single 24port Netgear switch). I have tried to put a basic Intel PCI-E NIC in the server and unraid didn't even see the card (other OSs have no issues seeing this additional NIC). I can ping out of the server two other devices on the network (local Windows PCs) with no issues, but those same PCs can not reach the server more then once every 40 seconds (see attach screen shot). On the other hand, the server can NOT ping the gateway (my pfSense firewall). I have found no condition in which the gateway can be reached, nor any device on the other side the gateway (1.1.1.1, 8.8.8.8, etc.). I have attached the diag dump from the server, this is a new install (no experience with unraid). I would like to spin this up with the two NetApp disk shelves that I have attached to it instead of ESXI. In my research I have found a few people that ran into similar issues, one seemed have fixed it by reformatting the USB drive and the other seems to have given up on unraid. Any help would be greatly appreciated as it looks like a good OS for my new 28 driver NAS. Thanks Chris P.S. Network layout pfSense running in an ESXi VM, connected to an Intellinet 24 port PoE switch. The Intellinet switch in connected to a Netgear GS728TS 24 port PoE switch. I get the same issues when connected to either switch and with all 4 ethernet ports or just port 1 on the R610. tower-diagnostics-20200412-1125.zip