jderby6119
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jderby6119
-
-
Looks like it dont have Vt-d or IOMMU enabled should I load the enable in the host bios?
-
is this what your looking for?
-
OUTPUT OF lspci -m -nn:
00:00.0 "Host bridge [0600]" "Intel Corporation [8086]" "4th Gen Core Processor DRAM Controller [0c00]" -r06 -p00 "Hewlett-Packard Company [103c]" "4th Gen Core Processor DRAM Controller [18e7]"
00:01.0 "PCI bridge [0604]" "Intel Corporation [8086]" "Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [0c01]" -r06 -p00 "Hewlett-Packard Company [103c]" "Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [18e7]"
00:02.0 "Display controller [0380]" "Intel Corporation [8086]" "Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [0412]" -r06 -p00 "Hewlett-Packard Company [103c]" "Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [18e7]"
00:03.0 "Audio device [0403]" "Intel Corporation [8086]" "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [0c0c]" -r06 -p00 "Hewlett-Packard Company [103c]" "Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [18e7]"
00:14.0 "USB controller [0c03]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family USB xHCI [8c31]" -r04 -p30 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family USB xHCI [18e7]"
00:16.0 "Communication controller [0780]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family MEI Controller #1 [8c3a]" -r04 -p00 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family MEI Controller [18e7]"
00:16.3 "Serial controller [0700]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family KT Controller [8c3d]" -r04 -p02 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family KT Controller [18e7]"
00:19.0 "Ethernet controller [0200]" "Intel Corporation [8086]" "Ethernet Connection I217-LM [153a]" -r04 -p00 "Hewlett-Packard Company [103c]" "Ethernet Connection I217-LM [18e7]"
00:1a.0 "USB controller [0c03]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family USB EHCI #2 [8c2d]" -r04 -p20 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family USB EHCI [18e7]"
00:1b.0 "Audio device [0403]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset High Definition Audio Controller [8c20]" -r04 -p00 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset High Definition Audio Controller [18e7]"
00:1c.0 "PCI bridge [0604]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8c10]" -rd4 -p00 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family PCI Express Root Port [18e7]"
00:1c.1 "PCI bridge [0604]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8c12]" -rd4 -p00 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family PCI Express Root Port [18e7]"
00:1c.4 "PCI bridge [0604]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8c18]" -rd4 -p00 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family PCI Express Root Port [18e7]"
00:1d.0 "USB controller [0c03]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family USB EHCI #1 [8c26]" -r04 -p20 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family USB EHCI [18e7]"
00:1f.0 "ISA bridge [0601]" "Intel Corporation [8086]" "Q85 Express LPC Controller [8c4c]" -r04 -p00 "Hewlett-Packard Company [103c]" "Q85 Express LPC Controller [18e7]"
00:1f.2 "IDE interface [0101]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family 4-port SATA Controller 1 [IDE mode] [8c00]" -r04 -p8f "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family 4-port SATA Controller 1 [IDE mode] [18e7]"
00:1f.3 "SMBus [0c05]" "Intel Corporation [8086]" "8 Series/C220 Series Chipset Family SMBus Controller [8c22]" -r04 -p00 "Hewlett-Packard Company [103c]" "8 Series/C220 Series Chipset Family SMBus Controller [18e7]"
01:00.0 "VGA compatible controller [0300]" "NVIDIA Corporation [10de]" "GP107 [GeForce GTX 1050 Ti] [1c82]" -ra1 -p00 "ZOTAC International (MCO) Ltd. [19da]" "GP107 [GeForce GTX 1050 Ti] [2454]"
01:00.1 "Audio device [0403]" "NVIDIA Corporation [10de]" "GP107GL High Definition Audio Controller [0fb9]" -ra1 -p00 "ZOTAC International (MCO) Ltd. [19da]" "GP107GL High Definition Audio Controller [2454]"
03:00.0 "SATA controller [0106]" "Marvell Technology Group Ltd. [1b4b]" "88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller [9215]" -r11 -p01 "Marvell Technology Group Ltd. [1b4b]" "88SE9215 PCIe 2.0 x1 4-port SATA 6 Gb/s Controller [9215]"
04:00.0 "USB controller [0c03]" "VIA Technologies, Inc. [1106]" "VL805/806 xHCI USB 3.0 Controller [3483]" -r01 -p30 "VIA Technologies, Inc. [1106]" "VL805/806 xHCI USB 3.0 Controller [3483]" -
-
Not sure why but file transfers seem to better after changing a few settings:
-
yea unfortunately theres no viable sitatuion where i can get my router and desktop to ethernet without have some wire running across my floor. I get good up/down speeds when im on the internet on my desktop especially when doing downloads but when traferring files in my local network between desktop and unraid box does this weird up and down and gives me nothing near the speeds like when im downloading something off the internet.
-
-
What happens when you stop/pause the inbound transfer?
>>Same thing happen. Start up hits 150Mbs then dips to then goes up again in same pattern during transfer
Where is that incoming traffic coming from?
>>Its a single 30gb back file from may desktop in my office to sharedrive on unraid server in garage. Both are connected to same router Desktop via wifi and Unraid via ethernet
Are you using a cache drive/array for the inbound traffic?
>>No Cache drive
What are you writing to on the Windows computer?
>>Im moving a backup file from my computer to the unraid share drive server
You should also attach a diagnostics file while this transfer is going on. Be sure to indicate the approximate time interval when it is happening.
-
I can figure out why if network interface of the router and server are both 1000Mbps and the transfer is all internal to local network
16 GiB DDR3 (max. installable capacity 32 GiB)
Network: bond0: transmit load balancing, mtu 9000
eth0: 1000 Mbps, full duplex, mtu 9000Kernel: Linux 5.15.46-Unraid x86_64
-
YOUR A WIZARD AMONGST MEN THANK YOU VERY MUCH!
-
great ill give that try..
-
About a day or 2 ago one of my disk started showing as disabled in the array and when i look at the disk log no errors are showing. I've restarted array, restarted the host, unplug and replugged the hard drive and still its coming up a disabled. The diagonstic log for the disk is below:
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.19.107-Unraid] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: Western Digital Blue
Device Model: WDC WD5000AAKX-60U6AA0
Serial Number: WD-WCC2EFD79463
LU WWN Device Id: 5 0014ee 25ddabd84
Firmware Version: 18.01H18
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Apr 29 07:58:51 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x05) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 9060) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1
3 Spin_Up_Time POS--K 157 136 021 - 3150
4 Start_Stop_Count -O--CK 094 094 000 - 6947
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-K 200 200 051 - 0
9 Power_On_Hours -O--CK 073 073 000 - 20036
10 Spin_Retry_Count PO--CK 100 100 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1989
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 096 000 - 4
188 Command_Timeout -O--CK 100 099 000 - 4295032833
190 Airflow_Temperature_Cel -O---K 070 060 040 - 30 (Min/Max 28/33)
192 Power-Off_Retract_Count -O--CK 200 200 000 - 124
193 Load_Cycle_Count -O--CK 198 198 000 - 6822
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 200 200 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warningGeneral Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data TransferSMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 4
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 4 [3] occurred at disk power-on lifetime: 19546 hours (814 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 07 8f 34 a8 40 00 Error: IDNF at LBA = 0x078f34a8 = 126825640Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 02 d0 00 48 00 00 07 8f 43 50 40 08 20:54:50.021 WRITE FPDMA QUEUED
61 02 18 00 40 00 00 07 8f 41 38 40 08 20:54:50.016 WRITE FPDMA QUEUED
61 05 40 00 38 00 00 07 8f 3b f8 40 08 20:54:50.016 WRITE FPDMA QUEUED
61 02 10 00 30 00 00 07 8f 39 e8 40 08 20:54:50.011 WRITE FPDMA QUEUED
61 05 40 00 28 00 00 07 8f 34 a8 40 08 20:54:50.006 WRITE FPDMA QUEUEDError 3 [2] occurred at disk power-on lifetime: 19546 hours (814 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 07 8b 7f 28 40 00 Error: IDNF at LBA = 0x078b7f28 = 126582568Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 80 00 30 00 00 07 8b 8d 30 40 08 20:54:18.011 WRITE FPDMA QUEUED
61 05 40 00 28 00 00 07 8b 87 f0 40 08 20:54:18.011 WRITE FPDMA QUEUED
61 03 88 00 20 00 00 07 8b 84 68 40 08 20:54:18.009 WRITE FPDMA QUEUED
61 05 40 00 18 00 00 07 8b 7f 28 40 08 20:54:18.009 WRITE FPDMA QUEUED
61 05 40 00 10 00 00 07 8b 79 e8 40 08 20:54:18.009 WRITE FPDMA QUEUEDError 2 [1] occurred at disk power-on lifetime: 19546 hours (814 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 04 ed ff d0 40 00 Error: IDNF at LBA = 0x04edffd0 = 82706384Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 b8 00 d0 00 00 04 ed ff d0 40 08 20:50:22.536 WRITE FPDMA QUEUED
61 00 70 00 c8 00 00 04 ed ff 60 40 08 20:50:22.536 WRITE FPDMA QUEUED
61 05 40 00 c0 00 00 04 ed fa 20 40 08 20:50:22.532 WRITE FPDMA QUEUED
61 05 40 00 b8 00 00 04 ed f4 e0 40 08 20:50:22.527 WRITE FPDMA QUEUED
61 05 08 00 b0 00 00 04 ed ef d8 40 08 20:50:22.521 WRITE FPDMA QUEUEDError 1 [0] occurred at disk power-on lifetime: 19546 hours (814 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 01 ff 25 50 40 00 Error: IDNF at LBA = 0x01ff2550 = 33498448Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 05 30 00 08 00 00 01 ff 2a e0 40 08 20:46:02.281 WRITE FPDMA QUEUED
61 00 50 00 00 00 00 01 ff 2a 90 40 08 20:46:02.275 WRITE FPDMA QUEUED
61 05 40 00 f0 00 00 01 ff 25 50 40 08 20:46:02.275 WRITE FPDMA QUEUED
61 05 30 00 e8 00 00 01 ff 20 20 40 08 20:46:02.269 WRITE FPDMA QUEUED
61 05 40 00 e0 00 00 01 ff 1a e0 40 08 20:46:02.264 WRITE FPDMA QUEUEDSMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 20019 -
# 2 Short offline Completed without error 00% 11099 -
# 3 Short offline Completed without error 00% 9976 -
# 4 Short offline Aborted by host 90% 9953 -
# 5 Short offline Completed without error 00% 9950 -
# 6 Extended offline Interrupted (host reset) 90% 1 -SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 28/33 Celsius
Lifetime Min/Max Temperature: 0/40 Celsius
Under/Over Temperature Limit Count: 0/0SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (65)Index Estimated Time Temperature Celsius
66 2020-04-29 05:51 30 ***********
... ..(126 skipped). .. ***********
65 2020-04-29 07:58 30 ***********SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 68274 Vendor specific -
So i tried Plex out on my movie share and it didnt work out the way i wanted so i went with jellyfin. During having plex as a docker in unraid i had one of the moview optimzed for plex and it created a folder with a file in it. Well i got rid of the plex docker but now when i go into the windows share i cant delete the file because it says the user "nobody" is the only one with permissions to do so. you require permission from my server\nobody to make any changes. HOW DO I DELETE THIS FOLDER/FILE?
-
Ok after hamster did a few laps around its wheel in my head i realize the issue unraid is showing TB and Microsoft is showing TiB even though its has the correct bytes amount. for me though it doesnt explain why on my drive 1 it shows 124GB used but when i look at the actual data stored on the drive its only less than 60gb. Where is the 124GB total amount used from if not from the data i have stored on the network share drive?
-
so i Microsoft displaying in TB and not TiB hence the smaller drive size display? Then even furthur why does not unraid display it as TiB instead as to not cause confusion.
-
Im having a issue with the size of my array and the size showing up on my SMB network sharing being reported. When i run compute size in unraid its showing less space available than actually whats being used.
[SUPPORT] SmartPhoneLover - Aurora Files (Afterlogic)
in Docker Containers
Posted
I i tried using your app but after i go to the super admin panel and change the password and user name nothing happens. I logout after the notification banner says its been updated but when i try to login with new credentials i just reverts back to the superadmin account.