Planet____9
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Planet____9
-
-
I've disabled it... i think. If you would rather have me uninstall it and reinstall wire guard once I fix the problem that's an option
-
15 hours ago, Turnspit said:
cat /etc/resolv.conf (show currently used DNS servers)
route -n (show Gatway address)
had some time, rebooted the server to fix the stuttering terminal and here
Linux 4.19.107-Unraid. Last login: Thu Aug 12 11:20:23 -0700 2021 on /dev/pts/0. root@Atkinson:~# cat /etc/resolv.conf # Generated by dhcpcd from br0.dhcp # /etc/resolv.conf.head can replace this line domain localdomain nameserver 192.168.1.1 # /etc/resolv.conf.tail can replace this line root@Atkinson:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 212 0 0 br0 10.253.1.2 0.0.0.0 255.255.255.255 UH 0 0 0 wg1 172.17.0.0 0.0.0.0 255.255.0.0 U 0 0 0 docker0 192.168.1.0 0.0.0.0 255.255.255.0 U 212 0 0 br0 192.168.1.20 0.0.0.0 255.255.255.255 UH 0 0 0 wg0 root@Atkinson:~# -
i know it isn't a static ip problem because i already had tried that. plus all of this was done via my windows machine remotely on the same lan . but I also got this fun oddity
-
What am I looking for here?
Linux 4.19.107-Unraid. Last login: Wed Aug 11 23:40:03 -0700 2021 on /dev/pts/0. root@Atkinson:~# ifconfig br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.17 netmask 255.255.255.0 broadcast 192.168.1.255 ether 00:8e:25:70:01:72 txqueuelen 1000 (Ethernet) RX packets 199312 bytes 31603970 (30.1 MiB) RX errors 0 dropped 11 overruns 0 frame 0 TX packets 95281 bytes 325782537 (310.6 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 docker0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255 ether 02:42:b5:f9:08:b6 txqueuelen 0 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500 ether 00:8e:25:70:01:72 txqueuelen 1000 (Ethernet) RX packets 203385 bytes 35426927 (33.7 MiB) RX errors 0 dropped 369 overruns 0 frame 0 TX packets 124977 bytes 325782057 (310.6 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 129 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 54693 bytes 8380941 (7.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 54693 bytes 8380941 (7.9 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1420 inet 192.168.1.1 netmask 255.255.255.255 destination 192.168.1.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 16 dropped 0 overruns 0 carrier 0 collisions 0 wg1: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1420 inet 10.253.1.1 netmask 255.255.255.255 destination 10.253.1.1 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 5 dropped 0 overruns 0 carrier 0 collisions 0
-
I'm gonna try and bump this
at midnight like an idiotbecause I'm tired of just living with this problem. I tried following this (https://www.redhat.com/sysadmin/beginners-guide-network-troubleshooting-linux) guide I found but honestly I have no reference on what I'm looking at. Here is my command terminal at the end.Linux 4.19.107-Unraid. Last login: Wed Aug 11 23:00:02 -0700 2021 on /dev/pts/0. root@Atkinson:~# ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 3: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 4: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 5: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 7: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 10: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc fq master br0 state UP mode DEFAULT group default qlen 1000 link/ether 00:8e:25:70:01:72 brd ff:ff:ff:ff:ff:ff 11: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 34:97:f6:85:aa:23 brd ff:ff:ff:ff:ff:ff 12: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 00:8e:25:70:01:72 brd ff:ff:ff:ff:ff:ff 13: wg1: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/none 14: wg0: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/none 15: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default link/ether 02:42:b5:f9:08:b6 brd ff:ff:ff:ff:ff:ff root@Atkinson:~# ip -s link show br0 12: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether 00:8e:25:70:01:72 brd ff:ff:ff:ff:ff:ff RX: bytes packets errors dropped overrun mcast 16550479 96181 0 4 0 0 TX: bytes packets errors dropped carrier collsns 15767237 46282 0 0 0 0 root@Atkinson:~# ip neighbor show 192.168.1.48 dev br0 lladdr 00:04:4b:fb:39:d5 REACHABLE 192.168.1.237 dev br0 lladdr 38:8b:59:04:21:dc STALE 192.168.1.21 dev br0 lladdr 70:85:c2:97:6b:47 REACHABLE 192.168.1.112 dev br0 lladdr 98:84:e3:cc:52:f0 DELAY 192.168.1.20 dev br0 lladdr 70:48:f7:d8:62:46 STALE 192.168.1.38 dev br0 lladdr 00:04:4b:fd:41:ba STALE 192.168.1.16 dev br0 lladdr e0:4f:43:13:75:ab STALE 192.168.1.59 dev br0 lladdr 7c:2e:bd:2e:f1:b4 STALE 192.168.1.201 dev br0 lladdr 1c:69:7a:17:97:60 STALE 192.168.1.113 dev br0 lladdr 26:d7:98:2a:2d:cc STALE 192.168.1.134 dev br0 lladdr c8:d9:d2:e6:72:c5 STALE 192.168.1.1 dev br0 lladdr 26:5a:4c:5e:1e:59 REACHABLE 192.168.1.209 dev br0 lladdr 46:c9:a2:82:f3:27 STALE 192.168.1.140 dev br0 lladdr 1c:30:08:21:3c:ad DELAY 192.168.1.15 dev br0 lladdr 66:3d:36:9f:21:b0 STALE root@Atkinson:~# ip neighbor delete 192.168.1.1 dev br0 root@Atkinson:~# ip neighbor show 192.168.1.48 dev br0 lladdr 00:04:4b:fb:39:d5 REACHABLE 192.168.1.237 dev br0 lladdr 38:8b:59:04:21:dc STALE 192.168.1.21 dev br0 lladdr 70:85:c2:97:6b:47 REACHABLE 192.168.1.112 dev br0 lladdr 98:84:e3:cc:52:f0 REACHABLE 192.168.1.20 dev br0 lladdr 70:48:f7:d8:62:46 STALE 192.168.1.38 dev br0 lladdr 00:04:4b:fd:41:ba STALE 192.168.1.16 dev br0 lladdr e0:4f:43:13:75:ab STALE 192.168.1.59 dev br0 lladdr 7c:2e:bd:2e:f1:b4 STALE 192.168.1.201 dev br0 lladdr 1c:69:7a:17:97:60 STALE 192.168.1.113 dev br0 lladdr 26:d7:98:2a:2d:cc STALE 192.168.1.134 dev br0 lladdr c8:d9:d2:e6:72:c5 STALE 192.168.1.1 dev br0 lladdr 26:5a:4c:5e:1e:59 REACHABLE 192.168.1.209 dev br0 lladdr 46:c9:a2:82:f3:27 STALE 192.168.1.140 dev br0 lladdr 1c:30:08:21:3c:ad STALE 192.168.1.15 dev br0 lladdr 66:3d:36:9f:21:b0 STALE root@Atkinson:~# ip -br address show lo UNKNOWN 127.0.0.1/8 ::1/128 tunl0@NONE DOWN gre0@NONE DOWN gretap0@NONE DOWN erspan0@NONE DOWN ip_vti0@NONE DOWN sit0@NONE DOWN eth0 UP eth1 DOWN br0 UP 192.168.1.17/24 wg1 UNKNOWN 10.253.1.1/32 wg0 UNKNOWN 192.168.1.1/32 docker0 DOWN 172.17.0.1/16 root@Atkinson:~# ping www.google.com ping: www.google.com: Name or service not known root@Atkinson:~# ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.011 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.011 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.010 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.009 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.010 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.008 ms ^C --- 192.168.1.1 ping statistics --- 6 packets transmitted, 6 received, 0% packet loss, time 5115ms rtt min/avg/max/mdev = 0.008/0.009/0.011/0.001 ms root@Atkinson:~# traceroute 192.168.1.1 traceroute to 192.168.1.1 (192.168.1.1), 30 hops max, 60 byte packets 1 192.168.1.1 (192.168.1.1) 0.014 ms 0.005 ms 0.004 ms root@Atkinson:~# traceroute www.google.com www.google.com: Name or service not known Cannot handle "host" cmdline arg `www.google.com' on position 1 (argc 1) root@Atkinson:~# ip route show default via 192.168.1.1 dev br0 proto dhcp src 192.168.1.17 metric 212 10.253.1.2 dev wg1 scope link 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown 192.168.1.0/24 dev br0 proto dhcp scope link src 192.168.1.17 metric 212 192.168.1.20 dev wg0 scope link root@Atkinson:~# nslookup www.google.com -bash: nslookup: command not found root@Atkinson:~# ss -tunlp4 Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process udp UNCONN 0 0 127.0.0.1:743 0.0.0.0:* users:(("rpc.statd",pid=1838,fd=7)) udp UNCONN 0 0 192.168.1.17:58356 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=91)) udp UNCONN 0 0 0.0.0.0:50279 0.0.0.0:* users:(("rpcbind",pid=1833,fd=7)) udp UNCONN 0 0 127.0.0.1:34138 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=90)) udp UNCONN 0 0 0.0.0.0:1900 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=10)) udp UNCONN 0 0 0.0.0.0:1901 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=94)) udp UNCONN 0 0 0.0.0.0:1956 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=19)) udp UNCONN 0 0 0.0.0.0:51820 0.0.0.0:* udp UNCONN 0 0 0.0.0.0:51821 0.0.0.0:* udp UNCONN 0 0 127.0.0.1:35968 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=92)) udp UNCONN 0 0 0.0.0.0:60674 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=25)) udp UNCONN 0 0 0.0.0.0:44407 0.0.0.0:* users:(("rpc.statd",pid=1838,fd=8)) udp UNCONN 0 0 0.0.0.0:3667 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=16)) udp UNCONN 0 0 192.168.1.17:54119 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=93)) udp UNCONN 0 0 192.168.1.17:46072 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=95)) udp UNCONN 0 0 0.0.0.0:5353 0.0.0.0:* users:(("avahi-daemon",pid=2467,fd=14)) udp UNCONN 0 0 0.0.0.0:55827 0.0.0.0:* users:(("avahi-daemon",pid=2467,fd=16)) udp UNCONN 0 0 0.0.0.0:56572 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=28)) udp UNCONN 0 0 0.0.0.0:32410 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=87)) udp UNCONN 0 0 0.0.0.0:32412 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=88)) udp UNCONN 0 0 0.0.0.0:32413 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=89)) udp UNCONN 0 0 0.0.0.0:32414 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=86)) udp UNCONN 0 0 192.168.1.17:68 0.0.0.0:* users:(("dhcpcd",pid=1735,fd=9)) udp UNCONN 0 0 0.0.0.0:111 0.0.0.0:* users:(("rpcbind",pid=1833,fd=6)) udp UNCONN 0 0 192.168.1.17:123 0.0.0.0:* users:(("ntpd",pid=1868,fd=17)) udp UNCONN 0 0 127.0.0.1:123 0.0.0.0:* users:(("ntpd",pid=1868,fd=16)) udp UNCONN 0 0 172.17.255.255:137 0.0.0.0:* users:(("nmbd",pid=2670,fd=25)) udp UNCONN 0 0 172.17.0.1:137 0.0.0.0:* users:(("nmbd",pid=2670,fd=24)) udp UNCONN 0 0 192.168.1.255:137 0.0.0.0:* users:(("nmbd",pid=2670,fd=20)) udp UNCONN 0 0 192.168.1.17:137 0.0.0.0:* users:(("nmbd",pid=2670,fd=19)) udp UNCONN 0 0 0.0.0.0:137 0.0.0.0:* users:(("nmbd",pid=2670,fd=17)) udp UNCONN 0 0 172.17.255.255:138 0.0.0.0:* users:(("nmbd",pid=2670,fd=27)) udp UNCONN 0 0 172.17.0.1:138 0.0.0.0:* users:(("nmbd",pid=2670,fd=26)) udp UNCONN 0 0 192.168.1.255:138 0.0.0.0:* users:(("nmbd",pid=2670,fd=22)) udp UNCONN 0 0 192.168.1.17:138 0.0.0.0:* users:(("nmbd",pid=2670,fd=21)) udp UNCONN 0 0 0.0.0.0:138 0.0.0.0:* users:(("nmbd",pid=2670,fd=18)) tcp LISTEN 0 50 0.0.0.0:139 0.0.0.0:* users:(("smbd",pid=2665,fd=33)) tcp LISTEN 0 128 0.0.0.0:111 0.0.0.0:* users:(("rpcbind",pid=1833,fd=8)) tcp LISTEN 0 128 0.0.0.0:80 0.0.0.0:* users:(("nginx",pid=3278,fd=9),("nginx",pid=3277,fd=9)) tcp LISTEN 0 128 127.0.0.1:32401 0.0.0.0:* users:(("Plex Media Serv",pid=3897,fd=57)) tcp LISTEN 0 100 0.0.0.0:32469 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=22)) tcp LISTEN 0 128 0.0.0.0:21 0.0.0.0:* users:(("inetd",pid=2396,fd=5)) tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:* users:(("sshd",pid=2388,fd=3)) tcp LISTEN 0 50 0.0.0.0:1815 0.0.0.0:* users:(("Plex DLNA Serve",pid=4014,fd=13)) tcp LISTEN 0 128 0.0.0.0:23 0.0.0.0:* users:(("inetd",pid=2396,fd=6)) tcp LISTEN 0 128 0.0.0.0:45303 0.0.0.0:* users:(("rpc.statd",pid=1838,fd=9)) tcp LISTEN 0 128 127.0.0.1:32600 0.0.0.0:* users:(("Plex Tuner Serv",pid=4017,fd=10)) tcp LISTEN 0 50 0.0.0.0:445 0.0.0.0:* users:(("smbd",pid=2665,fd=32)) tcp LISTEN 0 128 127.0.0.1:44767 0.0.0.0:* users:(("Plex Script Hos",pid=3933,fd=8)) root@Atkinson:~# -
recently switched to Unifi and since then my server has no internet access. The server functions perfectly for local access. I've tried to set the dns servers as 1.1.1.1 8.8.8.8 or use the built in ethernet vs the 2.5gig. I'm wondering if Unifi doesn't work perfectly with Unraid and how to tell that that's the case when all other devices work properly. Here is the diagnostics
-
So, I've fried my brain trying to understand how I broke the thing, but at first my server didn't have internet (unlike every other device on the lan but it could ping the router and do all lan tasks. Eventually i was trying to fix it after the app tab told me to change the dns server to 208.67.222.222 and 208.67.220.220 that fixed it, and now reverting the settings it's still fixed? ping google check browse apps check download app s NOatkinson-diagnostics-20210730-2214.zip I run unifi for my home network.Atkinson_NetworkSettings.pdf where to start?
-
I've been having a problem, I start ripping a DVD and my CPU usage is looking like normal operation so I check the file it gets to about 97MB and then the .MKV file disappears after a little bit of unpredictable waiting the disk ejects and the folder is still empty.
(Normal operation -> .mkv file disappears and the status light on the DVD drive stops -> randomly it ejects)
here is the log for the latest instance.
25.11.2020 05:59:47 : DVD detected: Saving MKV
'/out/Ripper/DVD/ROOTS_DISC2_SIDE_B' -> '/out/Ripper/DVD/finished/ROOTS_DISC2_SIDE_B'
25.11.2020 06:03:03 : Done! Ejecting DiskHow should I go about diagnosing this?
-
So I am finally getting an old pc donated to me and I will make it a dedicated nas for both Plex and network file shares. I'm leaning towards unraid due to the way expanding the array functions. The only problem being that I don't think that there will be any expansion options for more than an OS ssd and 2/3 hdds. So i ask, when I need more I will most likely be upgrading cpu and motherboard with no place to store the data other than the array can I make the upgrade without losing data?
And while your here how possible would it be to allow computers on my network access the optical drive that this pc comes with to watch/ rip media.
No internet, full local access.
in General Support
Posted
I'm not taking this as a victory, it might ,
willbreak... as this was originally an intermittent issue during the weeks leading up to the OPwill continue to update.
if there is any diagnostic command I should run while it seemingly works TELL ME.