[[SUPPORT] SmartPhoneLover - Vorta (GUI for Borg Backup)]

I have Vorta running on Unraid and backups are working and I can extract (restore) files.  However I cannot get the Mount option to work so that I can mount the whole archive as a folder.  I added the device /dev/fuse and --cap-add SYS_ADMIN to extra parameters.

 

This is what Im doing.  Going to the archive, selecting the Mount option and then created a restore folder in my backup share.  (mounted r/w).  

 

I get this "Mounted succesffuly" message at the bottom and the Mount option changes to unmount

 

But there are no files in the restore folder:

 

This is my docker setup:

[Threadfin - xteve fork]

Was wondering this myself.  I'm using xteve now with marginal success.  Would like to give Threadfin a try

[Moving data to new Unraid server]

Wow so no feedback what so ever?

[Moving data to new Unraid server]

I currently have a Proxmox server with three 8 TB drives in an ZFS Raidz1 container with about 10 TB of data on it.  I am building a new server and I want to use Unraid as the OS.  I would like to use the drives in my old server in the new Unraid but I need to figure out how to keep the data.  In addition I have these empty drives available to use in the new Unraid server:

• 4 - 4 TB HHDs
• 2 -  1 TB SSDs
• 4 - 512 GB SSDs

From what I have read I think this is the best plan but wanted to get feedback.  Fyi I am new to Unraid but have a moderate background in linux, proxmox, and docker.  

 

Plan to setup Unraid with the following

• Parity - 4 TB HHD
• Disk 1 - 4 TB HHD
• Disk 2 - 4 TB HHD
• Disk 3 - 4 TB HHD
• Cache 1 - 512 SSD
• Cache 2 - 512 SSD
• Cache 3 - 512 SSD
• Cache 4 - 512 SSD

 

According the this disk calculator , https://unraid.category5.tv/, that should give me about 10.88 TB.  I could then copy all files off my old server over to the new Unraid server.  At that point I would shut the old server down and move the 3 - 8 TB drives over to the new server.  If I understand correctly I can replace the 4 TB parity drive with one of the 8 TB drives (this is what I'm uncertain about).  I can then add the other two 8 TB drives into the array as additional disks.  End result looking like this:

• Parity - 8 TB HHD
• Disk 1 - 4 TB HHD
• Disk 2 - 4 TB HHD
• Disk 3 - 4 TB HHD
• Disk 4 - 4 TB HHD
• Disk 5 - 8 TB HHD
• Disk 6 - 8 TB HHD
• Cache 1 - 512 SSD
• Cache 2 - 512 SSD
• Cache 3 - 512 SSD
• Cache 4 - 512 SSD

Questions:

1. Is what I'm thinking possible?
2. Is it the best/easiest/safest method to get to the end goal?
3. Does having four 512 GB cache drives even make sense?
4. I also have two 1 TB SSDs that I can use somewhere.  Was thinking of creating a second array, mirroring these drives, for fast storage to host SQL DBs.  Can Unraid do this?

 

 

 

[[Support] binhex - DelugeVPN]

Hi.  I keep getting an error No OpenVPN config file located in /config/openvpn/ but they are there.  I'm running on Ubuntu 18.04 running Docker CE 19.03.12. I installed with these options:

docker run -d \
    --cap-add=NET_ADMIN \
    -p 8112:8112 \
    -p 8118:8118 \
    -p 58846:58846 \
    -p 58946:58946 \
    --name=delugevpn \
    -v /apps/docker/deluge/data:/data \
    -v /apps/docker/deluge/config:/config \
    -v /etc/localtime:/etc/localtime:ro \
    -e VPN_ENABLED=yes \
    -e VPN_USER=<my_user> \
    -e VPN_PASS=<my_pass> \
    -e VPN_PROV=pia \
    -e STRICT_PORT_FORWARD=yes \
    -e ENABLE_PRIVOXY=yes \
    -e LAN_NETWORK=192.168.1.0/24 \
    -e NAME_SERVERS=209.222.18.222,84.200.69.80,37.235.1.174,1.1.1.1,209.222.18.218,37.235.1.177,84.200.70.40,1.0.0.1 \
    -e DELUGE_DAEMON_LOG_LEVEL=info \
    -e DELUGE_WEB_LOG_LEVEL=info \
    -e ADDITIONAL_PORTS=1234 \
    -e DEBUG=false \
    -e UMASK=000 \
    -e PUID=0 \
    -e PGID=0 \
    binhex/arch-delugevpn

When I start the container I get:

2020-07-15 21:44:00.972750 [info] System information Linux 91cc90260a59 5.4.44-2-pve #1 SMP PVE 5.4.44-2 (Wed, 01 Jul 2020 16:37:57 +0200) x86_64 GNU/Linux
2020-07-15 21:44:01.016926 [info] OS_ARCH defined as 'x86-64'
2020-07-15 21:44:01.050212 [info] PUID defined as '0'
2020-07-15 21:44:01.084879 [info] PGID defined as '0'
2020-07-15 21:44:01.119972 [info] UMASK defined as '000'
2020-07-15 21:44:01.153461 [info] Permissions already set for volume mappings
2020-07-15 21:44:01.189918 [info] DELUGE_DAEMON_LOG_LEVEL defined as 'info'
2020-07-15 21:44:01.221706 [info] DELUGE_WEB_LOG_LEVEL defined as 'info'
2020-07-15 21:44:01.253360 [info] VPN_ENABLED defined as 'yes'
2020-07-15 21:44:01.288049 [crit] No OpenVPN config file located in /config/openvpn/ (ovpn extension), please download from your VPN provider and then restart this container, exiting...

 

The /config/openvpn folder did not exist so I started the container again, per the instructions, to try to get it to auto create but it didn't.  So I manually created it and loaded the crt, pem and ovpn files from PIA in there.

tom@vpnserver:~$ ls -al /config/openvpn
total 23
drwxrwxrwx 2 root root    5 Jul 15 21:23  .
drwxrwxrwx 3 root root    3 Jul 15 21:03  ..
-rwxrwxr-x 1 tom  tom  3157 Jul 15 21:23 'US West.ovpn'
-rwxrwxrwx 1 root root 2025 Jul 15 21:14  ca.rsa.2048.crt
-rwxrwxrwx 1 root root  869 Jul 15 21:14  crl.rsa.2048.pem

I tried changing the name of the ovpn file to remove spaces but that didn't make any difference so I changed it back to the PIA name.  I set the whole folder structure to 777 to rule out permissions.