[nfs4]

There is no way to enable NFSv4 server in unraid, almost positive that is a typo or misprint.

[Integrate Ganesha as a replacement of NFS Kernel server or as side bolt on.]

The NFS Server in unraid is still using v3 and has bugs in the recent release, I think offering an alternative to the built in nfs server would be a good for people seeking out NFS server with more enabled options.

 

https://github.com/nfs-ganesha/nfs-ganesha/wiki

 

Thanks,

 

Tim

[How to set 802.3ad 'xmit_hash_policy' (Transmit Hash Policy)?]

you may need to ifdown and ifup the interface after that echo.

 

#setup bonding for layer2+3
#ifconfig bond0 down;echo 'layer2+3' >/sys/class/net/bond0/bonding/xmit_hash_policy;ifconfig bond0 up

[NIC Bonding]

you can get more info by looking at /proc/net/bonding/bond0

 

Im doing LACP with layer 2+3 load balancing:

 

root@orion:~# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2+3 (2)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
Active Aggregator Info:
Aggregator ID: 2
Number of ports: 2
Actor Key: 9
Partner Key: 1003
Partner Mac Address: 1c:de:a7:30:aa:03

Slave Interface: eth0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:25:90:d5:17:34
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
    system priority: 0
    port key: 9
    port priority: 255
    port number: 1
    port state: 61
details partner lacp pdu:
    system priority: 1
    oper key: 1003
    port priority: 1
    port number: 52
    port state: 61

Slave Interface: eth1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:25:90:d5:17:35
Slave queue ID: 0
Aggregator ID: 2
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
    system priority: 0
    port key: 9
    port priority: 255
    port number: 2
    port state: 61
details partner lacp pdu:
    system priority: 1
    oper key: 1003
    port priority: 1
    port number: 51
    port state: 61
root@orion:~#