tiju1000

I have a CyberPower 1500 connected to the server with USB cable. The server see the UPS but is not showing the right nominal power Model: CP1500PFCLCDa Nominal power: 1000 Watts Should see 1500W.. or do I mist something. Thanks

Hi, I have an HP Z820 with 2 Xeon 2670, 8 cores 16 threads each. When I create a VM I see the attached screen. How do I know what Logical CPU's numbers are effectively on the physical CPU 1 and CPU 2 Is it CPU 0 to 7 and 16-23 are on CPU - 1 and CPU 8-15 and 24-31 are on CPU - 2 If it's the case it would have being great to have the screen showing physical CPU - 1 in the left columns and physical CPU-2 in the right...just an idea..

Hi, I just tried to pass trough a EVGA GPU to a windows 10 VM. Card is a GTx 650Ti ( UEFI not supported on that card) I was never able to make it work, tried to edit the Bios it never worked. Then I installed a EVGA GPU, GTx 760 and guess what it worked no trouble, no Bios, no disabling Hyper-V it just worked. Only difference I see on the spec is the 650 do not support UEFI and the 760 does... Any comments ? tks

Step 1 of 5 Pre-Read just finished took 16h and 25 minutes at 135 MB/s tj

Hi, I currently have a 4TB parity drive and want to replace it with a 8TB one. I also want to reuse the 4TB and make it a NEW data drive in the array. Can I use the "copy" procedure described in that wiki https://wiki.unraid.net/The_parity_swap_procedure tks Thierry

here it is. alcyone-diagnostics-20201018-1018.zip

Hi, first post, I'm trying Unraid, disk are connected to a LSI 9300-8i controller on the PCI 16x port. CPU is a I7-8700k and motherboard is a Gigabyte z370-n. Yesterday I installed one of those 8TB Western Digital white label and started that preclean operation. This morning I'm at 14h, the step 1 ( pre-read) is at 88% done, Average speed 143 MB/s Nothing else is running on the server, I stopped the Plex and all other VM's. Average CPU load is around 10-15% during the operation. Is there anything I did wrong Thierry