Tom98

Hi, is that a Terminal Command? It says command not found but when I check with "hdparm -W /dev/sdb" it says Write-caching is on

I Tried because it is VM to give it 15GB of RAM und 4 Cores but made it wores. 10GB File First 3GB with 350MB/s and then 6MB/s RAM is at 8% and CPU at about 32% while Coping

Hi, I'm having a weirdProblem with my Transfer Speeds. I have two HDD HGST Enterprise Drives with should give me about 150Mb/s and they do when I do a Speed Test via the Terminal. And when I run a parity check I get about 110 -130 Mb/s but when I use SMB or the Mover I get betwenn 11 - 14 Mb/s. I don't understand how that works and it is not a Problem with the Client or Network I have a Cache NVME and when I use that over SMB I get about 330-350 MB/s. I run Unraid as a Virtual Maschine in Proxmox the Driver are Connected via a JBOD USB3.0 so that Unraid gets all the SMART Data and has direct Access Can Someone help? EDIT: When I Copy from Unraid to Client I get about 135 Mb/s so it's just Write Performance

Hello, I have a HP Z420 and an Nvidea Quardo 2000. The Host runs stabel but everytime I passthrough the GPU and install the drivers. I get a bluscreen from Windows10/2k16/2k19. When the drivers are not installed the VM start and as sonn the are installed it crashes. When I start the VM without VNC Graphics nothing happens there is no output on the Quadro 2000. I asum it is going directly in to a bluescreen. There is nothing much in the VM logs. Can anyone Help me or has the same Machine and some tips. Maby it somthing in the Bios settings or the way it does passthrough. When I start the host without Unriad and just WIN 10 every thing works fine. HP Z420 Intel Xeon E5-2680 32GB ECC RAM NO Onboard Graphics (NVS 295) set to main boot graphic card Quadro 2000 Intel Pro/1000ET Dual Port Server Adapter