James Carl

Server has almost been up for 2 days, longest so far. Pretty sure this fixed it. I am running the memory at 2133 as it is single rank. Thanks for the help!

Thanks for the reply, I changed the Power Supply Idle Control setting and rebooted, will report back. I am running 4 sticks of RAM and the speed is set to auto(2667), is it recommended that change the speed to 1866, would that be a performance hit?

I am new to unraid. I set up a server a week or 2 ago and have been unable to get it stay up. I have done a lot of trouble shooting over the past 2 weeks which I have summarized below, note that it is based on memory so I might be forgetting some things or have them out of order. At some point I setup the syslog to be written to the flash drive and that is what is attached along with a diagnostic report from when the server was up and running. The syslog should capture around 5-10 times that this issue occurred, I tried analyzing but nothing stood out to me and it doesn't seem like anything was written to the syslog when the issues occurred. Description of problem: 1. Am able to boot, start the array and everything seems fine and is working correctly 2. After a couple hours I no longer see the shares on my windows machine and I can no longer access the web gui. 3. Pressing the power button does nothing, I have to hold it in order to restart the system 4. I am running the server with a graphics card, but I don't have a monitor usually plugged in. If I plug a monitor in after the issue happens I get no video output 5. One time, I forget if I had the monitor connected since boot, but I was able to access the console and log in while the issue was occurring 6. Issue occurs when nothing seems to be happening on the server with the exception of 2 times: a. I right clicked on a file in a share and it froze my windows explorer, afterwards the server was unavailable b. I think I started a parity check once and this happened System: Unraid 6.8.3 CPU: Ryzen 1700x (no overclock) MB: MSI B350 Bazooka Memory: 4x4GB Fury Hyperx (no overclock) PSU: Seasonic Connect 750W GPU: Radeon HD6450 1GB (only used as I can't headless boot with SATA expansion card for whatever reason) HDDs: 8TB Ironwolf NAS(Parity), 4TB WD, 2x 2TB WD SSDs: Samsung NVMe 256GB SATA PCIe Expansion card: IOCrest SI-PEX40064 Addons/Plugins: Community Applications, Deluge, Plex, User scripts Troubleshooting/steps I have tried in no specific order: 1. Memtest86 that is part of unraid, ran for ~20 hours, 7 passes, no errors 2. Memtest V8.4, did 4 passes, no errors 3. Ran with 2 sticks of RAM, then ran with the other 2 sticks in the other slots. Issue occurred both times 4. Changed out the USB flash drive with a newer one 5. Stopped dockers(Plex and deluge), issue still occurred 6. Uninstalled all plugins and docker apps, issue still occurred 7. I was initially running headless without a graphics card and without the SATA expansion card. The issue was occurring at this time. I have since added the GPU, SATA card and some SSDs to test them out and I haven't bothered taking them back out as the issue was occurring before I installed them 8. The first day or two I had the server up I got a warning about read errors, I have since replaced the SATA cable, not sure if that did anything tower-diagnostics-20201217-1735.zip syslog