[How to get IPv6 address for unraid docker application]

At present, both unreaid and VM can get the IPv6 address normally, but the docker application can't get the IPv6 address. What settings do i need to make in unraid.

At present, I only need nextcloud in docker to get the IPv6 address. Through query, nextcloud supports IPv6

So please confirm what settings need to be made for unraid

thanks

home-lab-diagnostics-20210624-0908.zip

 

--sysctl net.ipv6.conf.all.disable_ipv6=0 --sysctl net.ipv6.conf.eth0.use_tempaddr=2

Today, through this command, nextcloud can already obtain an IPV6 address through SLAAC, but I hope to obtain an IPV6 address through DHCPv6. Can it be achieved by modifying the above command? If so, how should it be modified?

[How does docker get an IPV6 address]

Nextcloud is installed in docker, but I can't get the IPV6 address, what should I do?

vm can obtain IPV6 address normally

[dokcer怎么获取IPV6地址]

目前所有虚拟机已经都成功获取到IPV6地址，并在ikuai软路由上做了DDNS，现在想把用dokcer安装的nextcloud也分配一个IPV6地址，应该怎么操作？目前nextcloud没有拿到IPV6地址

[VM ; eve-ng crashed]

I installed the EVE-NG virtual machine in ruaid and used the win7 template. When using EVE-NG, it often shuts down automatically. The logs viewed are as follows:

 

2021-01-14 02:55:55.488+0000: Domain id=16 is tainted: high-privileges
2021-01-14 02:55:55.488+0000: Domain id=16 is tainted: host-cpu
char device redirected to /dev/pts/2 (label charserial0)
2021-01-14 03:11:59.509+0000: shutting down, reason=crashed

 

[6.9.0-rc1的网卡，显卡直通问题]

版本RT

设备配置如图：

遇见问题：

1.pice网卡4个口直通，虚拟机A使用两个口后，虚拟机B再使用另外两个口会提示被占用（在一个分组里，无法拆分）

2.win10直通独显后，开机unraid会卡死（是卡死，不是黑屏，其中一次有报错，如下图）

3.win10直通核显报错如下图：

本人刚入坑小白，求帮助，设备配置如下：

此处设置过为BOTH以及YES，网卡依旧无法拆分

求帮助。。。另外确认一点，目前使用的是试用版，购买正式版后，每次开机需要联网验证密钥吗？（装了软路由，启动阵列后才有网。。但是要联网验证密钥后才能启动阵列。。。）