marcusfan
-
Posts
37 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Report Comments posted by marcusfan
-
-
Changed Status to Closed
-
I haven't been able to figure out how to upgrade the firmware yet, but I rebuilt the array with a new config in 6.10.1. I do still feel like it is a bug since it works fine in RC4 but breaks in 6.10.1
-
3 minutes ago, JorgeB said:
Problem is that you're using a very old firmware for the LSI HBA, those ancient firmware versions used the long name for SATA devices, this has been fixed a long time ago, and now it was also fixed in the driver for people still using an old firmware, you just need to do a new config and re-assign all the devices, then check "parity is already valid" before starting the array.
I would also recommend updating the LSI firmware to latest, note that if you update the firmware first you'll see the same issue with -rc4 you're seeing now with v6.10.1
I'll give this a go tomorrow and report back.
-
This should be the diagnostics when the drives cannot be seen.
-
Here is the diagnostics under 6.10.0-RC4
I haven't checked the device ID's for passthrough. I'll try it out tomorrow.
I have noticed the 6 main SATA ports work do not have any issue. The secondary SATA ports on the board are ones that break.
-
They are connected to the motherboard. ASRock Z87 Extreme11/ac
Array destroyed after upgrade
in Stable Releases
Posted
Fair enough. Closing the thread.