Stable Releases
Bug reports for stable releases.
2305 reports in this category
-
Important: please upgrade to the latest available stable release first, and if the bug/defect still exists please continue... In the Summary: field, please put the exact version of unRAID OS you are running inside brackets. For example: [6.2.1] <your topic> In Detailed Description please include as much information as possible in your report, including HOW TO REPRODUCE. Please visit Tools/Diagnostics and attach the diagnostics.zip file to your post.
- 0 comments
- 4,689 views
-
Can I please ask everyone when you mark an issue as "urgent" to obey these conditions: 1) The problem is reproduceable 2) Diagnostics and other relevant information are attached in the post We (the receiving side) get alarm bells ringing and act asap, but need info as much as possible to find and resolve the issue. Thank you.
- 0 comments
- 4,513 views
-
I recently upgraded to unRAID 7.0.1 and I had a bug where drives and GPU Ids keeps changing please see to this titan-diagnostics-20250720_0241.zip
- Urgent
- 1 comment
- 18 views
-
I'm on 7.1.4 but I don't think this issue is new to this version, hoopster noticed it a little over a year ago. I have a general support thread about this but wasn't sure how much the dev's looked at those vs the bug reports here. Myself and others have been manually editing our /config/syslog.cfg & syslog.conf files to log to an unassigned device/pool/whatever instead of the default share only behavior in the webui. This was acknowledged as possible in a couple threads (here for example) b
- Annoyance
- 2 comments
- 46 views
-
I have been using && docker network connect proxynet traefik in the docker "Post Arguments" field to connect my traefik container to an additional docker network after it is booted. It has been working great since forever. Since enabling tailscale on the container, I notice the docker run command sets this as an environment variable for the container With tailscale disabled this is the output from the update container screen: docker run -d --name='traefik' --net='br0.11' --ip='
- Minor
- 0 comments
- 19 views
-
I have upgraded to 7.1.0 and I have this error: May 5 21:20:06 Tower kernel: EDAC igen6 MC0: HANDLING IBECC MEMORY ERROR This indicates that my system's EDAC (Error Detection and Correction) has detected and is handling a memory error on a platform using Intel IBECC (In-Band ECC), root@Tower:~# dmesg | grep -i 'edac\|corrected\|error' [ 31.269955] EDAC MC: Ver: 3.0.0 [ 31.279209] caller igen6_probe+0x149/0x750 [igen6_edac] mapping multiple BARs [ 31.280156] EDAC MC0: Giving
- Minor
- 8 comments
- 722 views
-
The bottom of preclear status report has a typo of genereated rather then generated #################################################################################################### # Unraid Server Preclear of disk ZXA12345 # # Cycle 1 of 1, partition start on sector 64. # # # .... #
- Closed
- 2 comments
- 36 views
-
It is not possible to login when booting Unraid via GUI mode, if you have a password longer than 49 characters. Steps to reproduce: 1. Set a password via WebGUI longer than 49 characters (for example 60). 2. Reboot Unraid and select Unraid GUI 3. Enter username 4. Enter password 5. Incorrect login details (user/password) message If you carefully count and type in more than 49 characters into the password field (for example 60 as above), you
- Minor
- 0 comments
- 511 views
-
Hello, since a few weeks i get a lot of: php-fpm[9434]: [WARNING] [pool www] child 844 exited on signal 9 (SIGKILL) in the syslog and the webui is incredibly slow and after a while doesn't respond at all. After a reboot it takes about 1,5-2 days till this starts and i've seen it on 6.12.2, 6.12.3, and 6.12.4-rc18 thevault-diagnostics-20230825-1456.zip
- Urgent
- 32 comments
- 8,199 views
-
every day my serv crash in 7.1.4, i have try to find the problem but i didn't find anything when i downgrade the system seem stable until i boot vm like windows or linux except for homeassistant have a nice day 🖤💜 raillineserv-diagnostics-20250703_2256.zip
- Minor
- 7 comments
- 152 views
-
Wrong Pool State virtcache - missing devices when trying to upgrade 7.1.4. the Unraid will not come on line. dolphin-diagnostics-20250711_1640.zip
- Urgent
- 1 comment
- 31 views
-
Not sure if this is an unraid or Community apps bug but it seems tied to Unraid as CA was updated automatically and worked before the Unraid update Updated to 7.1.4, everything seemed to work fine. I hadn't updated from 6.x for a long time, just don't manage server often. Noticed Plex wasn't running and doesn't show up in docker. Apps tab gives timeout. CA version 2025.06.04a . Followed troubleshooting in forum post (DNS, etc). Can reach github/aws/etc from inside network. Followed recent
- Closed
- Minor
- 7 comments
- 157 views
-
Since this morning, when i go to the app tab, action center show me this "bug" Did you allready have this issue ?
- Closed
- 6 comments
- 81 views
-
When connected remotely and trying to stream video from Plex, using the inbuilt wireguard with Unraid gives constant buffering. After installing the linuxserver Wireguard Docker and also trying the tailscale plugin, all of this buffering goes away and the streaming works flawlessly.
- Minor
- 5 comments
- 103 views
-
brand new system 714 only used for smb ran windows 10 for 2 months no problem now unraid freezes and i cant get a screen to display if frozen i7 4770 , 32 gb ram thanks if i need to downgrade the option is not available snas-diagnostics-20250709-1001.zip snas-diagnostics-20250708-2330.zip
- Minor
- 2 comments
- 57 views
-
I'm running unRAID 7 but it was already in unRAID 6 a problem. In the Docker GUI I add an environment variable. When this variable includes < or > and I press the apply button they are deleted in the from unRAID created docker run command. I have multiple tools where I have to set a DEFAULT_MAIL and want to use the mailbox format like Sender <[email protected]>. This bug makes it impossible to configure this Docker container.
- Annoyance
- 6 comments
- 243 views
-
Since Upgrading to 7.1.x I have serious issues whenever I try to update a docker container. After pulling the files, the container cannot stop before updating and therefore docker crashes. I can't even reboot the server, I have to pull the plug. I uploaded the screenshot from the installation window and the syslog. I can also dump the entire syslog here if neccessary. I've had this problem before when I updated from 7.0 to 7.1. I even reverted the update to 7.0 and everything was wor
- Solved
- Minor
- 7 comments
- 222 views
-
Suddenly the "edit" button is missing for some applications in the drop-down list in the Docker tab, in this case for Plex Media Server: If I manually open: http://192.168.1.110/Docker/UpdateContainer?xmlTemplate=edit:/boot/config/plugins/dockerMan/templates-userPlex-Media-Server.xmlthen the template looks like this. It is missing a lot of stuff... If I check /boot/config/plugins/dockerMan/templates-user for templates I can see that the template for Plex is missing, but I have no idea why
- Closed
- 3 comments
- 73 views
-
Since upgrading from v6.12.14 to v7.0.0, my VMs can no longer obtain IPv6 addresses. Neither via DHCPv6 nor Router Advertisement. Previously this had worked without any problems. The VMs are machines with Windows Server 2019 and 2022. I have attached the corresponding diagnostic data. gsr-m-srv01-diagnostics-20250206-1738.zip
- Minor
- 15 comments
- 639 views
-
Apologies in advance as I don't really know what I'm doing, I just follow guides. Ryzen 3 3200G Nvidia Tesla P4 But anyway, have had this server setup for quite some time. Upgraded from 6.12.4 last week, and maybe the plex docker container as well. Noticed today that when trying to Transcode a video in Plex (official container) that I would get Error: 4294967283. Tried multiple files on different platforms (app,web,phone), same issue (though on phone it would just cl
- Minor
- 37 comments
- 11,278 views
-
I upgraded again to the latest and it crashes my Unraid server when restarting the VM via Windows desktop. I confirmed this doesn't happen in 7.0.1 because I revert to that version, once I upgraded to 7.1.3 or 7.1.4 the problem is still there Specs: I5-13500 Intel CPU RTX 5070ti Nvidia GPU 64GB Ram Windows 11 VM Steps that I made but still crashing unraid 7.1.4: Remove RTX 5070ti and using VNC only Change cores and install the latest virtio drivers 0.1.271 Attached my syslog: syslog T
- Annoyance
- 9 comments
- 267 views
-
Hi All, I noticed an issue ever since going to either 7.1.0 or 7.1.1 where the UPS Load number will freeze and not change no matter what i do. Going into UPS Settings and changing the "Start APC UPS daemon:" From YES to NO and back to YES does not resolve the issue. So far only way to resolve this is to disconnect and reconnect USB Cable to UPS. I thought maybe the last 2 updates might address this but still happening. Not a big issue but just wondering is anyone else has noticed this. Sam
- Closed
- 4 comments
- 119 views
-
It is impossible to have multiple export rules for NFS shares currently. NFS exports are separated by spaces which Unraid web UI is currently removing when hitting the apply button. You can work around this by manually editing /etc/exports and then running exportfs -arv.
- Solved
- Annoyance
- 3 comments
- 46 views
-
I experience the same issues upgrading from v7.0.1 no matter what version i try (i.e. v7.1.0 or v7.1.2) I have created 2 threads about the issues here and here. After many attempts i was about to collect some diagnostic logs while they were still v7.1.2. I had to revert both machines to v7.0.1 because of the instability issues. Please see my posts for detailed info. UPDATE 1: Some hours later on the same day T02 server reported the USB was corrupt or unmounted. Since this USB drive was used
- Closed
- Urgent
- 22 comments
- 783 views
-
When toggling autostart options at docker page, changes are saved to /var/lib/docker/unraid-autostart. However, if multiple switches are toggled at the same time, for example toggling the autostart switch of a folder created by folderview plugin, the unraid-autostart file appears to be edited at the same time, leaving it in a somewhat broken state. For example I have a unraid-autostart file like this in the first place: (I think it's already kind of broken, nginx-proxy-manager only has a "mana
- Minor
- 2 comments
- 75 views