jmztaylor
-
Posts
246 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jmztaylor
-
-
26 minutes ago, CouchPawTayTow said:
Looking through my purchase history I was incorrect. Mine is a different chipset. This is the exact one I purchased and haven't had a single issue with it
https://www.amazon.com/gp/product/B0BYXKPMBV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 -
13 hours ago, CouchPawTayTow said:
I recently switched my hardware (motherboard is a B660-ITX ASROCK which has 4x SATA ports and I need 6+, i7-12700K, and compatible RAM). Everything boots and works as normal when I am using a PCIE SAS controller, but I want to use the PCIE for a little GPU for transcoding and other apps.
Took out the SAS and put this little adapter in the M.2 slot - connected all the drives with same SATA cables but they're not registering in UNRAID (nor BIOS.) I've had a look through the forms and checked all the BIOS settings are as suggested, but still not dice. So I am either missing something in setting somewhere, the adapter is unsupported (I had a quick google, but I don't know what I'm looking for really in this regard), or it's just DOA and I need a replacement.
Thanks for any help!
NB: as nothing shows in BIOS, I assume diagnostics won't help, but attached just in case.
I have this exact one and it works without issue. I do not know the tech specs of what is required. But I just checked and they do not show in my BIOS either. But they all show in Unraid without issue. I think I remember mine saying it cannot be used for boot devices. This is just my experience and it might not help you at all.
-
3 hours ago, JorgeB said:
Should be fine, keep monitoring, if there are more errors in the near future then consider replacing it.
Sounds good. Thanks
-
1
-
-
Extended smart passed without issue and parity check ran without new errors. So I assume just a hiccup and good to go now?
-
1 minute ago, JorgeB said:
I would start another one, because if there's still a disk error, it may be the on same sector.
Ok. I cancelled the one pending and started it from scratch. I will report back if anything new shows up
-
1
-
-
Just now, JorgeB said:
It's logged as a disk issue, but it may be corrected now, you can run another check or an extended SMART test.
Parity never finished as its set to partially run overnight. Should I just continue it and see what happens at the end?
-
Parity check started and has some errors on the parity drive itself. Wanted to get input before doing anything.
-
1 hour ago, trurl said:
I saw this as well, I think it was a temporary condition related to CA feed.
I can confirm it is not showing like that anymore.
-
Why is this plugin showing up as blacklisted now?
-
Depends if you are using a controller presently or in the new server. Sometimes they modify the reported serial number. Take screenshot of current disk assignments with their serial numbers and slots.
But in a perfect world yes, just swapping the drives over and the usb drive should just work. If Unraid detects anything strange with the drives in the new machine it won't start the array to prevent data loss. So it won't destroy anything if it doesn't detect the right drives.
-
9 minutes ago, lawrence1986 said:
i would like help setting up. RustDeskServer-AiO Im going to list what I have done, so I port forward all the ports it wanted. That was simple. I also found the key in the appdata and placed that key on the other remote computers, which are Windows. Anything else I should do. I was hoping for self-hosing here with my own domain with NginxProxyManager. but that's not really working. I do have that set up in CloudFlare under the c name (rustdesk.example.com), and I do have it in NginxProxyManager with port 21117 with SSL on but it wont use the domain and its not working is i just place the key in the key it works but i don't know if that self-hosting or not
This is deprecated in favor of @ich777 all in one solution.
-
21 minutes ago, SimonF said:
I would set that as a port mapping for the 8bit device rather than name. But looks like it will still disconnect will see if I can find more info about it.
I would also turn off Start/Resume just leave auto connect and on VM Start turned on for the devices unless you want it to start the VM.
So I did the port instead and it will not show up in the VM unless I stop and start the VM.
Not sure why this one thing is being so odd with USB.
-
What I have determined is the controller, when off shows up as the entry with IDLE. Turned on its the next line
Even selecting both of them to pass through it doesn't work.
Dec 4 17:48:21 Tower usb_manager: Info: rc.usb_manager usb_add 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/024 001 024 Dec 4 17:48:21 Tower usb_manager: Info: rc.usb_manager usb_remove 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C
-
On 12/4/2023 at 6:00 PM, SimonF said:
Sorry /usr/local/emhttp/state/usb.ini
Also seem to have a similar problem with the 8bitdo controller I have also. Using your USBM, doesn't seem to work at all for it.
-
Spoiler
[001/007]
connected = ""
bus = 001
dev = 007
ID_VENDOR_FROM_DATABASE = "QinHeng Electronics"
ID_VENDOR_ID = "1a86"
ID_MODEL = "USB_Serial"
ID_MODEL_ID = 7523
USBPort = "1-10"
class = "interface"
parents = "usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
ID_SERIAL = "1a86_USB_Serial"
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"[001/002]
connected = ""
bus = 001
dev = 002
ID_VENDOR_FROM_DATABASE = "Ports=4
Power=100mA
"
ID_VENDOR_ID = 05e3
ID_MODEL = ""
ID_MODEL_ID = 0608
USBPort = "1-2"
class = "hub"
parents = "usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
ID_SERIAL = "05e3_USB2.0_Hub"
isSerial = ""
isSerialPath = ""[001/011]
connected = ""
bus = 001
dev = 011
ID_VENDOR_FROM_DATABASE = "Ports=4
Power=100mA
"
ID_VENDOR_ID = 05e3
ID_MODEL = ""
ID_MODEL_ID = 0610
USBPort = "1-3"
class = "hub"
parents = "usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
ID_SERIAL = "GenesysLogic_USB2.1_Hub"
isSerial = ""
isSerialPath = ""[001/005]
connected = ""
bus = 001
dev = 005
ID_VENDOR_FROM_DATABASE = "Micro Star International"
ID_VENDOR_ID = 1462
ID_MODEL = "MYSTIC_LIGHT"
ID_MODEL_ID = "7c56"
USBPort = "1-7"
class = "interface"
parents = "usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
ID_SERIAL = "MSI_MYSTIC_LIGHT_A02021090806"
isSerial = ""
isSerialPath = ""[001/006]
connected = ""
bus = 001
dev = 006
ID_VENDOR_FROM_DATABASE = "Canon, Inc."
ID_VENDOR_ID = "04a9"
ID_MODEL = "TS3500_series"
ID_MODEL_ID = "18d4"
USBPort = "1-9"
class = "interface"
parents = "usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
ID_SERIAL = "Canon_TS3500_series_598AF2"
isSerial = ""
isSerialPath = ""[002/001]
connected = ""
bus = 002
dev = 001
ID_VENDOR_FROM_DATABASE = "Ports=4
Power=0mA
"
ID_VENDOR_ID = "1d6b"
ID_MODEL = ""
ID_MODEL_ID = 0003
USBPort = "2-0"
class = "roothub"
parents = "0000:02:00.0,0000:00:01.2,pci0000:00"
ID_SERIAL = "Linux_6.1.64-Unraid_xhci-hcd_xHCI_Host_Controller_0000:02:00.0"
isSerial = ""
isSerialPath = ""[003/001]
connected = ""
bus = 003
dev = 001
ID_VENDOR_FROM_DATABASE = "Ports=4
Power=0mA
"
ID_VENDOR_ID = "1d6b"
ID_MODEL = ""
ID_MODEL_ID = 0002
USBPort = "3-0"
class = "roothub"
parents = "0000:2d:00.3,0000:00:08.1,pci0000:00"
ID_SERIAL = "Linux_6.1.64-Unraid_xhci-hcd_xHCI_Host_Controller_0000:2d:00.3"
isSerial = ""
isSerialPath = ""[003/005]
connected = ""
bus = 003
dev = 005
ID_VENDOR_FROM_DATABASE = "Ports=4
Power=100mA
"
ID_VENDOR_ID = "1a40"
ID_MODEL = ""
ID_MODEL_ID = 0101
USBPort = "3-1"
class = "hub"
parents = "usb3,0000:2d:00.3,0000:00:08.1,pci0000:00"
ID_SERIAL = "1a40_USB_2.0_Hub"
isSerial = ""
isSerialPath = ""[003/003]
connected = ""
bus = 003
dev = 003
ID_VENDOR_FROM_DATABASE = "Sunplus Innovation Technology Inc."
ID_VENDOR_ID = "1bcf"
ID_MODEL = "Depstech_webcam_MIC"
ID_MODEL_ID = "28c4"
USBPort = "3-4"
class = "interface"
parents = "usb3,0000:2d:00.3,0000:00:08.1,pci0000:00"
ID_SERIAL = "GG-210226_Depstech_webcam_MIC_01.00.00"
isSerial = ""
isSerialPath = ""[004/001]
connected = ""
bus = 004
dev = 001
ID_VENDOR_FROM_DATABASE = "Ports=4
Power=0mA
"
ID_VENDOR_ID = "1d6b"
ID_MODEL = ""
ID_MODEL_ID = 0003
USBPort = "4-0"
class = "roothub"
parents = "0000:2d:00.3,0000:00:08.1,pci0000:00"
ID_SERIAL = "Linux_6.1.64-Unraid_xhci-hcd_xHCI_Host_Controller_0000:2d:00.3"
isSerial = ""
isSerialPath = ""[001/017]
ishub = ""
connected = 1
parents = "1-2,usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
bus = 001
dev = 017
ID_VENDOR_FROM_DATABASE = "Intel Corp."
ID_VENDOR_ID = 8087
ID_MODEL = "0a2a"
ID_MODEL_ID = "0a2a"
USBPort = "1-2.3"
class = "interface"
ID_SERIAL = "8087_0a2a"
isSerial = ""
isSerialPath = ""
bNumInterfaces = 2
virsherror = ""
VM = "Windows 11"
virsh = "Device attached successfully"
connectmethod = "Auto"
connectmap = "Device"[001/018]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""[001/019]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""[001/020]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/021]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/023]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""[001/024]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""
virsherror = ""
VM = ""
virsh = "error: Failed to attach device from /tmp/libvirthotplugusbbybusWindows 11-001-024.xml
error: internal error: Did not find USB device bus:1 device:24"
connectmethod = "Auto"
connectmap = "Device"[001/025]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/026]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""[001/027]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""[001/028]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/029]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/030]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[003/015]
ishub = ""
connected = 1
parents = "3-1,usb3,0000:2d:00.3,0000:00:08.1,pci0000:00"
bus = 003
dev = 015
ID_VENDOR_FROM_DATABASE = "EasyPass Industrial Co., Ltd"
ID_VENDOR_ID = 1101
ID_MODEL = 2222
ID_MODEL_ID = 2222
USBPort = "3-1.1"
class = "interface"
ID_SERIAL = "1101_2222"
isSerial = ""
isSerialPath = ""
bNumInterfaces = 3
virsherror = ""
VM = "Windows 11"
virsh = "Device attached successfully"
connectmethod = "Auto"
connectmap = "Device"[001/032]
ishub = ""
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = "interface"
ID_SERIAL = ""
isSerial = 1
isSerialPath = "usb-1a86_USB_Serial-if00-port0"
bNumInterfaces = ""[001/033]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/034]
ishub = 1
connected = ""
parents = ""
bus = ""
dev = ""
ID_VENDOR_FROM_DATABASE = ""
ID_VENDOR_ID = ""
ID_MODEL = ""
ID_MODEL_ID = ""
USBPort = ""
class = ""
ID_SERIAL = ""
isSerial = ""
isSerialPath = ""
bNumInterfaces = ""[001/035]
ishub = ""
connected = ""
parents = "1-3,usb1,0000:02:00.0,0000:00:01.2,pci0000:00"
bus = 001
dev = 035
ID_VENDOR_FROM_DATABASE = "8BitDo"
ID_VENDOR_ID = "2dc8"
ID_MODEL = "8BitDo_Ultimate_wireless_Controller_for_PC"
ID_MODEL_ID = 3106
USBPort = "1-3.4"
class = "interface"
ID_SERIAL = "8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C"
isSerial = ""
isSerialPath = ""
bNumInterfaces = 1 -
1 minute ago, SimonF said:
The plugin should be able to handle changing Ids
can you provide cat /var/log/syslog | grep usb_manager
and cat /var/local/emhttp/state/usb.ini
no such file for usb.ini
Spoilerroot@Tower:~# cat /var/log/syslog | grep usb_manager
Dec 4 15:53:26 Tower root: plugin: creating: /boot/config/plugins/usb_manager/packages/usb_manager-2023.12.01.txz - downloading from URL https://raw.githubusercontent.com/SimonFair/USB_Manager/master/usb_manager-2023.12.01.txz
Dec 4 15:53:26 Tower root: plugin: checking: /boot/config/plugins/usb_manager/packages/usb_manager-2023.12.01.txz - MD5
Dec 4 15:53:26 Tower root: plugin: running: upgradepkg --install-new /boot/config/plugins/usb_manager/packages/usb_manager*%/boot/config/plugins/usb_manager/packages/usb_manager-2023.12.01.txz /boot/config/plugins/usb_manager/packages/usb_manager-2023.12.01.txz
Dec 4 15:53:26 Tower root: plugin: creating: /tmp/start_usb_manager - from INLINE content
Dec 4 15:53:26 Tower root: plugin: setting: /tmp/start_usb_manager - mode to 0770
Dec 4 15:53:26 Tower root: plugin: creating: /boot/config/plugins/usb_manager/usb_manager.cfg - from INLINE content
Dec 4 15:53:26 Tower root: plugin: creating: /boot/config/plugins/usb_manager/remote_usbip.cfg - from INLINE content
Dec 4 15:53:26 Tower root: plugin: creating: /boot/config/plugins/usb_manager/vm_mappings.cfg - from INLINE content
Dec 4 15:53:29 Tower root: plugin: usb_manager.plg installed
Dec 4 15:54:20 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 15:54:44 Tower usb_manager: Updating usb settings...
Dec 4 15:55:37 Tower usb_manager: Info: rc.usb_manager Upgrade Connected Status
Dec 4 15:56:10 Tower usb_manager: usb settings updated.
Dec 4 15:56:31 Tower usb_manager: Updating usb settings...
Dec 4 15:56:31 Tower usb_manager: usb settings updated.
Dec 4 15:56:43 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 16:00:23 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 16:00:52 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 16:00:55 Tower usb_manager: Info: virsh called Windows 11 003 012 Device attached successfully
Dec 4 16:00:55 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 003/012 temp vm: Windows 11
Dec 4 16:05:28 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 16:05:28 Tower usb_manager: Info: rc.usb_manager VM Shutdown 003/012 vm: Windows 11
Dec 4 16:08:07 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 16:08:11 Tower usb_manager: Info: virsh called Windows 11 003 012 Device attached successfully
Dec 4 16:08:11 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 003/012 temp vm: Windows 11
Dec 4 16:08:11 Tower usb_manager: Info: virsh called Windows 11 001 014 Device attached successfully
Dec 4 16:08:11 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/014 temp vm: Windows 11
Dec 4 16:08:11 Tower usb_manager: Info: virsh called Windows 11 001 004 Device attached successfully
Dec 4 16:08:11 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/004 temp vm: Windows 11
Dec 4 16:18:42 Tower usb_manager: Info: rc.usb_manager usb_remove 8087_0a2a /dev/bus/usb/001/004 001 004
Dec 4 16:18:42 Tower usb_manager: Info: rc.usb_manager Device Match 001/004 vm: Windows 11 001 004
Dec 4 16:18:42 Tower usb_manager: Info: virsh called Windows 11 001 004 Device detached successfully
Dec 4 16:18:42 Tower usb_manager: Info: rc.usb_manager Disconnect 001/004 vm: Windows 11 running 001 004
Dec 4 16:18:42 Tower usb_manager: Info: rc.usb_manager Removed 001/004 vm: Windows 11 running 001 004
Dec 4 16:18:43 Tower usb_manager: Info: rc.usb_manager usb_add 8087_0a2a /dev/bus/usb/001/015 001 015
Dec 4 16:19:03 Tower usb_manager: Info: rc.usb_manager Add device with more than one interface & connect serial .
Dec 4 16:19:03 Tower usb_manager: Info: rc.usb_manager Autoconnect vm state:running 8087_0a2a running 001 015
Dec 4 16:19:03 Tower usb_manager: Info: virsh called Windows 11 001 015 Device attached successfully
Dec 4 17:13:22 Tower usb_manager: Info: rc.usb_manager usb_remove 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/014 001 014
Dec 4 17:13:22 Tower usb_manager: Info: rc.usb_manager Device Match 001/014 vm: Windows 11 001 014
Dec 4 17:13:23 Tower usb_manager: Info: rc.usb_manager usb_add 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/016 001 016
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/014 vm: Windows 11
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager VM Shutdown 003/012 vm: Windows 11
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/015 vm: Windows 11
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager starting/resuming vm as device connected Windows 11 device map from state shutoff.
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager Removed 001/014 vm: Windows 11 shutoff 001 014
Dec 4 17:13:24 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 17:13:27 Tower usb_manager: Info: virsh called Windows 11 003 012 Device attached successfully
Dec 4 17:13:27 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 003/012 temp vm: Windows 11
Dec 4 17:13:27 Tower usb_manager: Info: virsh called Windows 11 001 015 Device attached successfully
Dec 4 17:13:27 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/015 temp vm: Windows 11
Dec 4 17:13:28 Tower usb_manager: Info: virsh called Windows 11 001 012 Device attached successfully
Dec 4 17:13:28 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/012 temp vm: Windows 11
Dec 4 17:13:55 Tower usb_manager: Info: rc.usb_manager usb_remove 8087_0a2a /dev/bus/usb/001/015 001 015
Dec 4 17:13:55 Tower usb_manager: Info: rc.usb_manager Device Match 001/015 vm: Windows 11 001 015
Dec 4 17:13:55 Tower usb_manager: Info: virsh called Windows 11 001 015 Device detached successfully
Dec 4 17:13:55 Tower usb_manager: Info: rc.usb_manager Disconnect 001/015 vm: Windows 11 running 001 015
Dec 4 17:13:55 Tower usb_manager: Info: rc.usb_manager Removed 001/015 vm: Windows 11 running 001 015
Dec 4 17:13:56 Tower usb_manager: Info: rc.usb_manager usb_add 8087_0a2a /dev/bus/usb/001/017 001 017
Dec 4 17:13:58 Tower usb_manager: Info: rc.usb_manager Autoconnect vm state:running 8BitDo_IDLE_E417D8F8FA8C running 001 016
Dec 4 17:13:59 Tower usb_manager: Info: virsh called Windows 11 001 016 Device attached successfully
Dec 4 17:14:15 Tower usb_manager: Info: rc.usb_manager Add device with more than one interface & connect serial .
Dec 4 17:14:15 Tower usb_manager: Info: rc.usb_manager Autoconnect vm state:running 8087_0a2a running 001 017
Dec 4 17:14:15 Tower usb_manager: Info: virsh called Windows 11 001 017 Device attached successfully
Dec 4 17:19:07 Tower usb_manager: Info: rc.usb_manager usb_remove 1100_2222 /dev/bus/usb/003/012 003 012
Dec 4 17:19:07 Tower usb_manager: Info: rc.usb_manager Device Match 003/012 vm: Windows 11 003 012
Dec 4 17:19:07 Tower usb_manager: Info: rc.usb_manager usb_add 1101_2222 /dev/bus/usb/003/013 003 013
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/012 vm: Windows 11
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager VM Shutdown 003/012 vm: Windows 11
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/016 vm: Windows 11
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/017 vm: Windows 11
Dec 4 17:19:08 Tower usb_manager: Info: virsh called Windows 11 003 012 error: Failed to detach device from /tmp/libvirthotplugusbbybusWindows 11-003-012.xml error: Requested operation is not valid: domain is not running
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager Disconnect 003/012 vm: Windows 11 shutdown 003 012
Dec 4 17:19:08 Tower usb_manager: Info: rc.usb_manager Removed 003/012 vm: Windows 11 shutdown 003 012
Dec 4 17:19:12 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 17:19:15 Tower usb_manager: Info: virsh called Windows 11 001 016 Device attached successfully
Dec 4 17:19:15 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/016 temp vm: Windows 11
Dec 4 17:19:15 Tower usb_manager: Info: virsh called Windows 11 001 017 Device attached successfully
Dec 4 17:19:15 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/017 temp vm: Windows 11
Dec 4 17:19:15 Tower usb_manager: Info: virsh called Windows 11 001 012 Device attached successfully
Dec 4 17:19:15 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/012 temp vm: Windows 11
Dec 4 17:19:52 Tower usb_manager: Info: rc.usb_manager Add device with more than one interface & connect serial .
Dec 4 17:19:52 Tower usb_manager: Info: rc.usb_manager Autoconnect No Mapping found 1101_2222 /dev/bus/usb/003/013 003 013 port 3-1.1
Dec 4 17:24:20 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 17:24:20 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/012 vm: Windows 11
Dec 4 17:24:20 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/016 vm: Windows 11
Dec 4 17:24:20 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/017 vm: Windows 11
Dec 4 17:24:50 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 17:24:53 Tower usb_manager: Info: virsh called Windows 11 001 016 Device attached successfully
Dec 4 17:24:53 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/016 temp vm: Windows 11
Dec 4 17:24:54 Tower usb_manager: Info: virsh called Windows 11 001 017 Device attached successfully
Dec 4 17:24:54 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/017 temp vm: Windows 11
Dec 4 17:24:54 Tower usb_manager: Info: virsh called Windows 11 001 012 Device attached successfully
Dec 4 17:24:54 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/012 temp vm: Windows 11
Dec 4 17:24:54 Tower usb_manager: Info: virsh called Windows 11 003 013 Device attached successfully
Dec 4 17:24:54 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 003/013 temp vm: Windows 11
Dec 4 17:25:04 Tower usb_manager: Info: rc.usb_manager usb_remove 1101_2222 /dev/bus/usb/003/013 003 013
Dec 4 17:25:04 Tower usb_manager: Info: rc.usb_manager Device Match 003/013 vm: Windows 11 003 013
Dec 4 17:25:05 Tower usb_manager: Info: virsh called Windows 11 003 013 Device detached successfully
Dec 4 17:25:05 Tower usb_manager: Info: rc.usb_manager Disconnect 003/013 vm: Windows 11 running 003 013
Dec 4 17:25:05 Tower usb_manager: Info: rc.usb_manager Removed 003/013 vm: Windows 11 running 003 013
Dec 4 17:25:05 Tower usb_manager: Info: rc.usb_manager usb_add 1100_2222 /dev/bus/usb/003/014 003 014
Dec 4 17:25:58 Tower usb_manager: Info: rc.usb_manager Add device with more than one interface & connect serial .
Dec 4 17:25:58 Tower usb_manager: Info: rc.usb_manager Autoconnect vm state:running 1100_2222 running 003 014
Dec 4 17:25:58 Tower usb_manager: Info: virsh called Windows 11 003 014 Device attached successfully
Dec 4 17:26:56 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 17:26:56 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/012 vm: Windows 11
Dec 4 17:26:56 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/016 vm: Windows 11
Dec 4 17:26:56 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/017 vm: Windows 11
Dec 4 17:26:56 Tower usb_manager: Info: rc.usb_manager VM Shutdown 003/014 vm: Windows 11
Dec 4 17:28:09 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 17:28:12 Tower usb_manager: Info: virsh called Windows 11 003 014 Device attached successfully
Dec 4 17:28:12 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 003/014 temp vm: Windows 11
Dec 4 17:28:12 Tower usb_manager: Info: virsh called Windows 11 001 016 Device attached successfully
Dec 4 17:28:12 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/016 temp vm: Windows 11
Dec 4 17:28:12 Tower usb_manager: Info: virsh called Windows 11 001 017 Device attached successfully
Dec 4 17:28:12 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/017 temp vm: Windows 11
Dec 4 17:28:13 Tower usb_manager: Info: virsh called Windows 11 001 012 Device attached successfully
Dec 4 17:28:13 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/012 temp vm: Windows 11
Dec 4 17:29:59 Tower usb_manager: Info: rc.usb_manager usb_remove Broadcom_Corp_BCM2045A_0002720B18F2 /dev/bus/usb/001/012 001 012
Dec 4 17:29:59 Tower usb_manager: Info: rc.usb_manager Device Match 001/012 vm: Windows 11 001 012
Dec 4 17:29:59 Tower usb_manager: Info: virsh called Windows 11 001 012 Device detached successfully
Dec 4 17:29:59 Tower usb_manager: Info: rc.usb_manager Disconnect 001/012 vm: Windows 11 running 001 012
Dec 4 17:29:59 Tower usb_manager: Info: rc.usb_manager Removed 001/012 vm: Windows 11 running 001 012
Dec 4 17:43:46 Tower usb_manager: Info: rc.usb_manager usb_remove 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/016 001 016
Dec 4 17:43:46 Tower usb_manager: Info: rc.usb_manager Device Match 001/016 vm: Windows 11 001 016
Dec 4 17:43:46 Tower usb_manager: Info: virsh called Windows 11 001 016 Device detached successfully
Dec 4 17:43:46 Tower usb_manager: Info: rc.usb_manager Disconnect 001/016 vm: Windows 11 running 001 016
Dec 4 17:43:46 Tower usb_manager: Info: rc.usb_manager Removed 001/016 vm: Windows 11 running 001 016
Dec 4 17:43:47 Tower usb_manager: Info: rc.usb_manager usb_add 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C /dev/bus/usb/001/018 001 018
Dec 4 17:44:22 Tower usb_manager: Info: rc.usb_manager usb_add 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/022 001 022
Dec 4 17:45:12 Tower usb_manager: Info: rc.usb_manager Autoconnect No Mapping found 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C /dev/bus/usb/001/018 001 018 port
Dec 4 17:45:12 Tower usb_manager: Info: rc.usb_manager usb_add /dev/bus/usb/001/019 001 019
Dec 4 17:45:12 Tower usb_manager: Info: rc.usb_manager usb_remove 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C /dev/bus/usb/001/018 001 018
Dec 4 17:45:29 Tower usb_manager: Info: rc.usb_manager Autoconnect vm state:running 8BitDo_IDLE_E417D8F8FA8C running 001 022
Dec 4 17:45:29 Tower usb_manager: Info: virsh called Windows 11 001 022 Device attached successfully
Dec 4 17:46:02 Tower usb_manager: Info: rc.usb_manager Autoconnect No Mapping found /dev/bus/usb/001/019 001 019 port
Dec 4 17:46:02 Tower usb_manager: Info: rc.usb_manager usb_remove /dev/bus/usb/001/019 001 019
Dec 4 17:46:02 Tower usb_manager: Info: rc.usb_manager usb_add /dev/bus/usb/001/020 001 020
Dec 4 17:46:43 Tower usb_manager: Info: rc.usb_manager Autoconnect No Mapping found /dev/bus/usb/001/020 001 020 port
Dec 4 17:46:43 Tower usb_manager: Info: rc.usb_manager usb_add /dev/bus/usb/001/021 001 021
Dec 4 17:46:43 Tower usb_manager: Info: rc.usb_manager usb_remove /dev/bus/usb/001/020 001 020
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager Autoconnect No Mapping found /dev/bus/usb/001/021 001 021 port
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager usb_remove /dev/bus/usb/001/021 001 021
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager usb_add 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C /dev/bus/usb/001/023 001 023
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager usb_remove 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/022 001 022
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager Device Match 001/022 vm: Windows 11 001 022
Dec 4 17:47:24 Tower usb_manager: Info: virsh called Windows 11 001 022 Device detached successfully
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager Disconnect 001/022 vm: Windows 11 running 001 022
Dec 4 17:47:24 Tower usb_manager: Info: rc.usb_manager Removed 001/022 vm: Windows 11 running 001 022
Dec 4 17:48:18 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 stopped end -
Dec 4 17:48:18 Tower usb_manager: Info: rc.usb_manager VM Shutdown 001/017 vm: Windows 11
Dec 4 17:48:18 Tower usb_manager: Info: rc.usb_manager VM Shutdown 003/014 vm: Windows 11
Dec 4 17:48:21 Tower usb_manager: Info: rc.usb_manager Autoconnect No Mapping found 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C /dev/bus/usb/001/023 001 023 port
Dec 4 17:48:21 Tower usb_manager: Info: rc.usb_manager usb_add 8BitDo_IDLE_E417D8F8FA8C /dev/bus/usb/001/024 001 024
Dec 4 17:48:21 Tower usb_manager: Info: rc.usb_manager usb_remove 8BitDo_8BitDo_Ultimate_wireless_Controller_for_PC_E417D8F8FA8C /dev/bus/usb/001/023 001 023
Dec 4 17:48:21 Tower usb_manager: Info: rc.usb_manager starting/resuming vm as device connected Windows 11 device map from state shutoff.
Dec 4 17:48:22 Tower usb_manager: Info: rc.usb_manager vm_action Windows 11 prepare begin -
Dec 4 17:48:25 Tower usb_manager: Info: virsh called Windows 11 003 014 Device attached successfully
Dec 4 17:48:25 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 003/014 temp vm: Windows 11
Dec 4 17:48:25 Tower usb_manager: Info: virsh called Windows 11 001 017 Device attached successfully
Dec 4 17:48:25 Tower usb_manager: Info: rc.usb_manager Autoconnect Start 001/017 temp vm: Windows 11
Dec 4 17:48:31 Tower usb_manager: Info: Removing configuration '8BitDo_IDLE_E417D8F8FA8C'.
-
17 minutes ago, SimonF said:
Try removing BT modules as per this thread.
That was it. As for the USB, its still changing IDs each time I switch on the KVM. So I'm going to just add each of them as they pop up. It actually seems like its cycling through 5 of them. Some chinese garbage Im sure.
Thanks for the help!
-
26 minutes ago, SimonF said:
Do you need to install a intel driver?
Thats what I started with doing. I assumed the Windows driver didn't like it for some reason. In the same context since I am running this with a drive passed through, if I boot the unraid server from that drive which is my windows install the bluetooth works without issue.
-
27 minutes ago, SimonF said:
If you use my USB Manager plugin it will reconnect the USB when you switch. You need to remove from the VM template and setup USBM.
You can create a mapping either as a port or device. Enable Auto connect at device plugin and at VM Start.
Not sure why your BT is not working.
That sure fixed the issue with my KVM. Changing to usb 3 didn't do anything for my bluetooth issue though.
-
So I am not sure what information is needed so diags are attached.
I have a PCI wifi/bluetooth adapter trying to passthrough to a VM. The wifi portion is working but the bluetooth portion is stating unable to start in device manager in windows. The bluetooth module is showing as USB device as it plugs into a header on the motherboard.
The other issue is, I have a 2-port KVM that I use to switch between my pc and the VM. Passthrough works just fine once. Then it seems after I switch it once or twice, the USB ID changes sequentially. So if I stop the VM and try to restart it, it fails since its tied to the wrong USB ID now. Is there anything I can do to fix this?
-
3 minutes ago, ich777 said:
Because I've never intended to have that many containers/plugins... I got more and more containers over time and now I'm at the point where I have almost 200 apps in the CA App.
TBH I also can't imagine creating almost 200 dedicated threads, this would be too much for me...
I didnt mean anything negative towards you at all. I use a lot of yours so was the first that came across my mind.
You are on top of your support thread like a hawk. But for someone that isn't on that thread all the time, its a lot of info to try and get through for things that might have already been asked or issues ran into.
TBF, yes that would be a lot but admins could do a lot too more easily than you.-
1
-
-
So one of my biggest issues with the forum is developers that have a huge amount of CAs and single threads for all of them. Finding any specific information is nearly impossible. For the developer this is easier to maintain support, but for end users its a nightmare. Why not break these developers into their own subforum and have a thread for each app? Most people can agree repeating questions is an annoyance and the current setup encourages this without meaning to.
In all reality how is any information supposed to be found for example in @ich777 support thread at 140 pages long. (Even though he is very active and quick to reply to posts) Search is average at best and for specific issues the wording might be different so impossible to find. And if searching fails users might start from the first page but that information might be out of date by the time they get to it.
Just my .02. And it wouldn't be that hard to implement.
-
2
-
-
41 minutes ago, dboonthego said:
Windows has this feature built-in.
I was about to say, why even need a special calculator. Unraid core feature is any mixture of sizes and as long as you can add you know the size of your array.
-
14 hours ago, sfaruque said:
Thank you @jmztaylor. I've install it and run the command --scan. It says 'The Kernel flag libata.allow_tpm is not set correctly'. Any idea how this is done? I'm looking for the readme but nothing like that downloaded with the sedutil-cli wget.
I have never used the utility before so I can't help with that. But the repo should have plenty of details
https://github.com/ChubbyAnt/sedutil/
[Support] RustDesk Server
in Docker Containers
Posted
Yes please lock