![](http://content.invisioncic.com/u329766/set_resources_34/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
Paincookie
-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by Paincookie
-
-
22 hours ago, John_M said:
Even when all the necessary components have been downloaded the VM doesn't appear until after you have run the helper script for the first time. The vmready_notify script isn't necessary. All it does is tell you that the downloads are complete and it's time to run the helper script with default settings.
But nothing happend. on the Domains Share i see the Macinabox BigSur Folder with the macos_disk.img inside, but not in the VMS Tab
-
i tryed the helper Script, but the VM is still not here. in the script is a error: failed to get domain. i changed the vm name in the script. but before it also did not work.
-
Hi everyone,
i installed the Tools like in the video presented. my problem is the vmready notify script is running, running,..... i see at the isos the images from big sur and obencore. at domains i also see the big sur img. but no VM in the VM Tabs. i let it running 24h.
-
Hi again,
still the same problem. Could anyone help?
-
Has anyone an idea to fix the problem with suspend to ram?
-
So i have tested it. Under Windows 10 i can Suspend to Ram.
the WOL Problem is solved. I put a TP-Link Networkcard with Realtek Chip in a PCIe Slot. With this a can wake the Server from S5.
But the Suspend to Ram would be a great benefit.
-
1
-
-
15 minutes ago, Benson said:
Most mainboard should have this setting or name S3, may be further check mainboard menu to confirm this.
Thats good, but Rpi for this seem too heavy, some electronic products also can do this well, I use one which connect to WiFi with handset apps support for similar purpose, just ~usd5
I checked the bios few times and also the manual. I found nothing. But u will test it with a Windows.
For wake up i need something that works also from the internet via vpn connection.
-
Hi,
at the bios from the new mainboard, there is no direct Setting for suspend to ram. Maybe that means a regular consumer Mainboard dosent Support Suspend to Ram?
Ok The Gigabyte mainboard has a Rivet Networks Killer E2500 LAN Chip.
the other Way to wake up the server would be a Raspi which is connected to the Power Button.
Hmm... maybe Ryzen isnt the right choice?
-
No idea? would it be better to change the AMD System to a Intel o5 9600K with an Z390 Mainboard? (i have a short time to send the AMD back)
-
Hi everybody,
EDIT: The WOL Problem is solved. The Sleep problem is still open!
i have new Mainboard, Ram and CPU in my Server and some little Troubles.
Mainboard: Gigabyte X370 Gaming K3
CPU: AMD Ryzen 5 3600
Ram: 16GB DDR4
GPU: GTX 1050 Ti
Iam running Unraid Version: 6.6.6
The problem what i have is, the server didnt go to Sleep. The LED from Mouse and Keyboard go off for only 1 second.
The next thing is, WOL dosent work. At the Bios its activated, but when i look via terminal "ethtool eth0" there is no WOL Entry.
i think it did not work, because the Mainboard dosent support WOL from S5 (no link active). So if i can fix the Sleep Problem, the WOL problem is solving itself?
My old Mainboard (Intel S2600CO) dosent support Sleep, so i could not test it. But WOL works from S5 Mode.
Thanks for helping
edit: i tried Version 6.7.2 with same problem. i also tryed to initiate Sleep and pull off the network cable. Also the same. HDDs spinning down. LED from Keyboard/Mouse going off. Power LED is still runnung and one second later its up
Best regards
Martin
[Support] SpaceinvaderOne - Macinabox
in Docker Containers
Posted · Edited by Paincookie
Has anyone an idea why the vm dont pop up in the VM Manager? Isos and img are created. I can see them in the shares.
edit. I tryed to create a custom VM. i could not safe because of some issues, but the Mac VM from the tool is now visible in the VM Manager ^^. Now i must fix the Network Issue