wallacearizona

Yes, the only post I have seen about these temp messages is to remove the bios from the card but on my machine it will not initialize with Unraid without the bios present. Yes this card runs extremely hot. I created a custom vent shroud with 2 60mm fans removing heat away and still runs in the 60’s . If anyone with the log problem has a bit of coding experience could we parse the logs of these messages?

I have the same issue from what I noticed its when the drive are commanded to shutdown then I get this in the log that seems to wake up the drive: emhttpd: read SMART /dev/sdm Not sure why it triggers to read the SMART on the drive after its spundown.

Hello I am seeking some help on a new setup using the LSI 9206-16e. I was able to get the card flashed to IT mode with the BIOS but for some reason my MPT2SAS keeps filling up with temp flag warnings. Apr 15 09:20:04 kernel: mpt2sas_cm0: Temperature Threshold flags 0 exceeded for Sensor: 0 !!! Apr 15 09:20:04 kernel: mpt2sas_cm0: Current Temp In Celsius: 80 Apr 15 09:20:24 kernel: mpt2sas_cm1: Temperature Threshold flags 0 exceeded for Sensor: 0 !!! Apr 15 09:20:24 kernel: mpt2sas_cm1: Current Temp In Celsius: 60 I have read the temperature and air flow requirements for the card and I am within specs for the card. Can someone tell me how to change the Temperature Threshold Flags or how to silence the messages in the logs? Attached is my Diagnostics. Thanks Everyone! wallaceserver-diagnostics-20210415-1143.zip