[Drives Not Showing In Array After Some Upgrades - 6.12.3]

4 hours ago, trurl said:

Looks good. You should probably do a parity check just to confirm. Or if you have one scheduled soon you could just wait on that.

 

Unrelated, your appdata has some files on disk2

Got that little bit at the end sorted also. 

Thank you folks for your help, really was greatly appreciated. 

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

5 hours ago, JorgeB said:

 

 

Looks to be all back up and running now. 

Thanks for all the information/help it was greatly appreciated. I think seeing the "All existing data on this device will be OVERWRITTEN when array is Started" really freaked me out. 

 

Here's a link to the screenshot of the array - 

https://ibb.co/yQvfRcg

 

I've attached the new diagnostics if you want to check it out. 

 

 

dmp-unraid-diagnostics-20240121-1751.zip

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

18 hours ago, trurl said:

 

Unless you assign one of your data disks to a parity slot. This is the main thing we are concerned about.

 

Apologies about the delay in getting back to y'all was out of the house for the day. 

I've assigned all the drives correctly according to what I had previously from the screenshot above.

Here's a link to the new diagnostics. I've just assigned the drives and haven't done anything else yet. 

 

 

dmp-unraid-diagnostics-20240121-1053.zip

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

12 minutes ago, trurl said:

Did you understand the specific device it was referring to? Parity has none of your data.

In the second link above it's referencing the parity drive. 

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

4 hours ago, JorgeB said:

If you now the correct assignments, you can re-assign all devices and check "parity is already valid" before array start, then start the array, but since we don't know why the disks were "wrong" there may be other issues, if the disks don't mount post new diags.

This is how it was originally when I screenshot it before everything - 

https://ibb.co/yWvFsKZ

Here it is now when I've reassigned the disks like above - 

https://ibb.co/9gjhJNr 

Is this a good sign now that I've added all the drives back like above? 

 

https://ibb.co/cxZ8TTT

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

38 minutes ago, trurl said:

Are you sure you know your disk assignments? New Config wants to rebuild parity on any disk assigned to any parity slot.

 

Could you post a screenshot of the exact message, I think you probably have misunderstood.

 

37 minutes ago, trurl said:

Do you have a current backup of your boot flash?

 

33 minutes ago, trurl said:

Only if you have syslog server setup

I'd taken a screenshot of the disk array earlier in the day. This is the message that popped up "All existing data on this device will be OVERWRITTEN when array is Started" 

I've a back up from August (I hit backup after the setup earlier and it then had today's date/time for the backup). 

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

Is it possible to get previous logs? I seen the disks and was matching them up the way they were previously. 

 

There was a message saying that if it was started that all information would be erased so I unassigned them. 

[Drives Not Showing In Array After Some Upgrades - 6.12.3]

Hi, I'm at a bit of a loss at the moment. I'm running Unraid on a HP Microserver Gen 8 and have wanted for awhile to upgrade the CPU and the RAM & SSD cache drive, got it all up & running bar having the wrong ram, popped back in the old ram and it booted up. 

I then got an error message "Too Many Wrong And/or Missing Disks!" looked on the forums and they mentioned about "New Config" I did that and now none of my disks are showing in the array. Is it completely wrecked and will I just have to start over again? 
 

Some links to screenshots to show my issue and I'll attach my log at the bottom. Any help greatly appreciated, thanks. 
 

https://ibb.co/0r3fbbk
https://ibb.co/NVVkHk4
https://ibb.co/WvZHHvq

 

dmp-unraid-diagnostics-20240119-1822.zip

[[Support] binhex - Sonarr]

Hey folks quick question. I have been receiving this error message the last while and it seems to be persistent. If i manually test the indexers it disappears but then pops up  again a little while later. 

Any help greatly appreciated. 

"2021-12-17 13:06:13.0|Warn|HttpClient|HTTP Error - Res: [GET] https://torrentapi.org/pubapi_v2.php?mode=list&ranked=0&category=18%3B41%3B49&limit=100&token=(removed)&format=json_extended&app_id=Sonarr: 429.TooManyRequests 2021-12-17 13:06:13.0|Warn|Rarbg|API Request Limit reached for Rarbg"