kn0wt

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by kn0wt

  1. i had a terminal window open, but it was on the default location ~: i'll try out the plugin and see if that helps..
  2. having the same issue as @falkfyrebeard on 6.12.3, I attached my diagnostics and the output of `losetup`.. hopefully it'll help as well? ive had it happen to me the last 2 times ive stopped the array.. 1st time i waitied 20-30 min and then just hard rebooted the server. then just did it again and had the same issue.. root@Excalibur:~# losetup NAME SIZELIMIT OFFSET AUTOCLEAR RO BACK-FILE DIO LOG-SEC /dev/loop1 0 0 1 1 /boot/bzfirmware 0 512 /dev/loop2 0 0 1 0 /mnt/disk1/system/docker/docker.img 0 512 /dev/loop0 0 0 1 1 /boot/bzmodules 0 512 root@Excalibur:~# /etc/rc.d/rc.docker status status of dockerd: stopped root@Excalibur:~# umount /dev/loop2 root@Excalibur:~# excalibur-diagnostics-20230829-1006.zip
  3. sitting here tearing out my hair trying to figure out why i was stuck with the unmounting drives.... low and behold this solved the issue on 6.12.3...
  4. I apologize for the delay in getting back to this. I drive truck and am gone from the house 2-4 weeks at a time. I am starting to believe this is a motherboard or bios issue. Currently updating bios now, but I took the PCI card out and stuck it in an old pc and tossed unraid on a fresh usb drive and it booted just fine and detected the drive(s) attached to the PCI card. this lets me know its not the card or unraid issue. just gotta find out why my server doesn't like it...
  5. Thanks for the info, I'll look into getting the bios updated and trying a different slot
  6. Apologize for the delay, work had been hell this week.. Appreciate any help on figuring this out. excalibur-diagnostics-20210516-1334.zip
  7. Yeah Amazon into said ASM1061 I'll get the diagnostic uploaded
  8. Howdy fellow unraiders, just started using unraid (6.9.x) about a month ago and really enjoy the software. Just wondering what the best PCI-e card would be to increase disk count. I purchased two cards off Amazon as one of the questions on the item, asked if it worked in unraid and someone replied yes, but I can't seem to get unraid to detect they disks attached to it.. bios can see the drives attached, windows can see them, I can even boot windows from the card, but unraid doesn't see drives. Looking in tools>system devices, I can see the PCI card.. below is the card(s) I bought I don't know if it's just limitations of the cards or unraid, hoping someone could point me in some direction. Thought about just doing a SAS card with SAS to Sata cables, just not sure which to go with. System specs below; Asus ROG Strix X470-F Gaming AMD Ryzen 7 2700X Eight-Core 16Gb Corsair Vengeance 4x4TB HDD 1x500GB HDD 1x240HB SSD