FTW

after few test. I unplug my FAN5 and FAN6 and did a "ipmitool bmc reset cold". They are the one who hitting a lower critical NR and I fall on another issue... this time its FAN ABC who are stuck at 7200rpm while FAN 1234 are at normal RPM....

There the Screenshot I got 3 fans stuck between 6 800rpm and 7 2000rpm

Hello, little update from my issue with IPMI plugin I find out the polling Temp stop when there a Critical issue in the Event Logs and after I cleared the warning, it doesnt restart... and for unknown reason, there 1 sometime 2 fans been detected at 0 RPM. and After after that. it show weird warning like when the RPM are around 1 200 RPM even if the Lower CT is set at 200 or 300 rpm, it appear in the Event Log. I disabled the HDD Spundown option to test if is that option who put my fan to 0 RPM while switching to another sensor. I got one question -> How do I restart the polling temp? it seem stuck at the last configuration showed in the ipmifan.log and no update appear in this log since the Critical Warning. Thanks

nevermind... I think I found my issue... I Cleared the Event Logs in the plugin -> Readings -> Event Logs -> Clear ALL seem I need to clear there too, not only in the IPMI at the moment it seem to work, they all slowed down

Hi guys, I recently updated to the newer version 2025.01.26c was on 2025.01.21 and after the update, the fan control doesnt work anymore.... all my fans are stuck at full speed... I am trying to find the issue since this morning and I think its a bug in the plugin and not in my setting... I did reboot, BMC cold Reset, reset the thresholds of all my fans (mix of Noctua and SuperMicro loud fans) and even if my CPU or HDD Temp are under my setting (25 degree after a reboot) with the Fan control Enable, all fans are at their max RPM There no Fans on Critical State, all are Normal State The only way I can slow them down is by putting the Fan Control at OFF and going in the IPMI to change the Fan Mode to Optimal Need some help uhuh so tell me what logs you guys need and I will post it ** in the ipmifan.log ** we can see it try to slow them down to 5% but unsuccessful and the next polling (set at every 1 minute) seem never happen also UnRaid version = 6.12.15 IPMI plugin version = 2025.01.26c Last working IPMI Version = 2025.01.21 Thank a lot

Hi, so how do we install un-get and add your repository to install jdupes v1.28? trying to find out how but I didnt see anywhere to explain how Thank for Helping

Hi, Goodjob and thanks for your Cache Mover. after few test I fall on some issue 1. Cache Mover -> Work for my TVshow but seem not work for my movies... probably because of my folder structure maybe? -> /Media/Plex/Movies/A/A movie name, /Media/Plex/Movies/W/W movie name <- I sort every movies in a Alphabetic folder 2. after more than 24h, it don't moving the TVShow back to Array... stuck in the cache. Do I need to do something with the Mover Tuning or it suppose to do it automatically? 3. I set my cache dir to -> cache <- but in the log, the only movie it moved to cache, he sent it to -> /mnt/cache3/Media/Plex/Movies/** and cache3 doesnt exist.... 4. Do I need to set my /Media folder to Cache -> Array. It was in Array only Thanks

Thanks SimonF

okay thanks a lot

Hi, is that can help -> I can only add them by using the CLI and I cannot remove any Devices from the GUI either. By the way, What is the targetcli to remove a block device? I need to remove some block uhuh Thanks a lot

for that use case, do the Array on the second Unraid server where I want to use the Block device in the Array/pool must be Started first for the iSCSi Initiator plugin to be active and connect to the target?

yeah so I can use the LUN Block Device in my second server Unraid Array?! but of course that mean this Storage server need to be Online first otherwise the other Array won't start up ok thanks a lot, that will change a bit how I will do my project

oh so that mean I can use the LUN Block Device in my Array/Pool?

ok like using mergerFS or any sort of unionFS to merge all the block devices togeter? and how will come the encryption of the block device? is there anything in UnRaid CA I can use to encrypt the block devices?

Thanks ich for answering my question! I don't fully understand, what do you mean with that? Do you want to use one server as the Target and one server as the Initiator? No, I mean I want to turn this UnRaid array into a Target. Both Server will be a Target Yeah some kind of that. one server will be a Storage archive where I will store all the files (ex. for Plex) and the other one will use for the downloader app (qbit, and others thing, etc). Accessible between them and my window machine for some random personal stuff to store in them. Thanks