[Red X - drive gone or can I rebuild?]

I have a drive that’s been disabled and sitting with a red X. My understanding is Unraid has disabled the drive due to a write failure. I’d like to rebuild the drive to see if it’s still salvageable - wise thing to do? All of the material I’ve found about rebuilding talks about replacing the drive, nothing about rebuilding an existing drive. 

 

My thought is unassigned, restart the array, stop the array, then re-assign but would like to validate before doing so.

 

Thanks!

[Can’t reach server]

RESOLVED

 

So, I called my ISP Friday to inquire into the incentives available for new customers and why existing customers are left in the dark. Long story short they matched the deal. Well, in doing so they changed the external subnet. Coincidently the new subnet matched the subnet I was using on the internal network. Google WiFi was smart enough to see the conflict and changed the internal network subnet. All DHCP enabled devices were working fine while the hard coded devices, i.e. my server, were not. 

 

Man, that took some head scratching, thanks for jumping in to assist though @Frank1940, very much appreciated!

 

I am still curious about the errors I was seeing on reboot though. Interestingly enough I did not see any errors during the complete shutdown that you recommended. I’ll try a restart again to see if the errors still exist. 

[Can’t reach server]

Diagnostics .ZIP attached.

 

Thanks in advance!

tower-diagnostics-20190903-1722

[Can’t reach server]

Hey everyone, I had a strange problem pop up last week that I haven’t been able to resolve. Through Plex, I started the conversion of a video then left for a few hours. I checked it when I got back and there was an error. From that point Friday I have been unable to access the server through the web interface. In fact, I can’t even reach the address via ping or the like. 

 

I can can log into the server directly but to be honest, I know very little of Linux. I’ve done all of the obvious things like changing ports as cables on the switch. One interesting thing I noticed was when I reset the server hoping that would fix the problem, there were four or five lines with an error referring to config/docker.img. Unfortunately it buzzed by fairly quick. I can take a few pictures of the screen when I’m home tonight if that will help. 

 

Looking for some guidance as I’m not sure where to start. 

[The Enclosure Thread]

Nice looking cases and so much variety when using a tower. Anyone willing to share info on their rackmount?