subye
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by subye
-
-
On 11/29/2021 at 3:40 PM, doesntaffect said:
Tried several other bios rom files. The card also boots with a Gigabyte rom, however at the end boot process gets stuck shortly after virtual CPU has successfully been initialized (according to open core debug logs).
can use the same card with stock dumped bios rom in a Win11 VM.
As a result, cannot recommend this card for a virtual hackintosh. Will go for a RX570 ITX from Sapphire.
Thanks for providing results from testing. I have serveral attempts as well and all failed similarly. I guess RX560 will not work with New OS. The manufature of my card is Yeston.
A low profile card which only occupy one PCI-slot space.
- 1
-
Hi, everyone.
I have used search bar profusely and do not see anyone mention this so I intend to start this thread and clear few possible causes for new MAC os.
Previously, I had a good run with Catalina and it had no problem with GPU passthrough while I installed X299 with Rx560 graphic card.
But after I tries to upragde my OS to Monterey, no matter what SMBIOS I uses, it alwasy shows black screen after the OS selection pannel and before the Apple Logos shows up. I tried to upradde kext ,used boot-arg, selected vbios but to no avail. Since my system could boot normally if the OS is Catalina, I believe the probelms lies in the new OS. The similar situation that was mentioned by everyone else does not eactly fouces on issue with the OS system but hardware probelms or older version MacOS that is proved to be working if every setting is correct.
So I am curious if there is anyone that could use Monterey and passed through similar gpu to the OS
-
problem solved. I set up prot-F on VPN server
-
7 hours ago, ljm42 said:
Probably your best bet would be to configure the router so that the Unraid server doesn't use the VPN. The other option would be to configure your VPN service so that it does the port forwarding rather than your router.
Hi, Thanks for offering help. I have disabled VPN on router and passed the test. But still cannot access remotely.
-
I configured my router with a VPN service so that all the traffic will be through the router with an external IP address that match my VPN server. But the problem with this is the unraid read the incorrect WAN IPv4 address, which is not ISP address but the VPN server address. I set up the port forwarding in the router, yet it shows server unreachable. How can I fix this?
The attached picture shows the IP address of the VPN server.
I can access 10.10.10.10:443/Main
But Cannot access MY Real IP address:Port that is forwarding to 443
Also the port is open outside my local network.
There is no "Template repositories" in my docker setting page..
in General Support
Posted
Simply why?