swampcat

I want a 2nd ethernet card manually configured. Due to the load I want a dedicated connection between the Unraid and a Server. I've got a second ethernet connection. But how can I manually configure this in network.cfg? I took eth1 already out of the Bond. But need to add it somehow. The system now has eth0 and eth1 available. eth0 uses dhcp eth1 I want to manually configure. The manual says: USE_DHCP=no IPADDR=192.168.1.150 N ETMASK=255.255.255.0 GATEWAY=192.168.1.1 But I'm trying to figure out how to point this to eth1 [My current config:] # Generated settings: IFNAME[0]="" DHCP_KEEPRESOLV="no" DHCP6_KEEPRESOLV="no" BONDNICS[0]="eth0 eth2 eth3" BONDING_MODE[0]="1" BONDING_MIIMON[0]="100" BRNICS[0]="bond0" BRSTP[0]="0" BRFD[0]="0" DESCRIPTION[0]="Ethernet Build-In" USE_DHCP[0]="yes" SYSNICS="1" Solved: IFNAME[1]="eth1" DESCRIPTION[1]="description" PROTOCOL[1]="ipv4" USE_DHCP[1]="no" IPADDR[1]="10.11.12.1" NETMASK[1]="255.255.255.0" SYSNICS="2" P.S. Those looking for Ethernet Dongles working with Unraid. Since I had around 10 different ones lying around. Those dongles working out of the box on osX (without additional driver installations) seem to work fine with Unraid.