Nour

Hi all, I'd like to switch from QNAP OS to Unraid, but I encounter issue with fan control management. On Qnap OS, I launch a script to reduce RPM from 6500 to 3000 (approximatively). But on Unraid, the fans seem be identified but pwmconfig return "Manuel control not supported, skipping hwmon3/pwm3". The fans are not stopped by pwmconfig during the tests. Any help would be appreciated, many thanks and happy new year. Found the following devices: hwmon0 is acpitz hwmon1 is coretemp hwmon2/device is f71869a hwmon3 is nct7802 Found the following PWM controls: hwmon2/device/pwm1 current value: 255 hwmon2/device/pwm2 current value: 255 hwmon2/device/pwm3 current value: 255 hwmon3/pwm1 current value: 255 hwmon3/pwm2 current value: 255 hwmon3/pwm3 current value: 149 hwmon3/pwm3 stuck to 149 Manual control mode not supported, skipping hwmon3/pwm3. Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! hwmon2/device/fan2_input current speed: 0 ... skipping! hwmon2/device/fan3_input current speed: 0 ... skipping! hwmon3/fan1_input current speed: 7068 RPM hwmon3/fan2_input current speed: 0 ... skipping! hwmon3/fan3_input current speed: 7105 RPM Warning!!! This program will stop your fans, one at a time, for approximately 5 seconds each!!!