jsiemon
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by jsiemon
-
-
Just to jump in on this issue, I recently updated to 6.10.3 and today I went to do a manual backup using the plugin but no backup was initiated. I reverted back to 6.10.2 and all is working fine. Before reverting to 6.10.2 I tried using macvlan instead of ipvlan but that made no difference. There is definitely an issue with the plugin and 6.10.3. For now I'll just stay with 6.10.2.
-
SOLVED:
The issue is not related to the Docker Template or UnRaid but is unique to OpenHAB. I have a high core count server(32 cores) and Jetty chokes. The solution is to either pin the docker to no more than 4 cores or update the OpenHAB conf/services/runtime.cfg as follows.
For future reference: in Openhab 3.0 org.eclipse.smarthome.webclient has changed to org.openhab.webclient. So it becomes:
org.eclipse.smarthome.webclient:minThreadsShared=20
org.eclipse.smarthome.webclient:maxThreadsShared=40org.eclipse.smarthome.webclient:minThreadsCustom=15
org.eclipse.smarthome.webclient:maxThreadsCustom=40After making these changes OH3 runs without apparent issue.
_______________
I've been running OpenHAB 2.5.x for almost 2 years now using the Docker template without much problem. I have also spun up another Docker to evaluate OpenHAB 3.0 and it runs pretty well overall, but I have 1 major problem with OH 3.0 that I do not have OH2.5x, I am unable to connected to OH3.0 from the myopenhab.org website. I can push Notifications from the site but I cannot access my local OH3.0 WebUI from home.myopenhab.org. For 2.5.x I have no issue. Every time I try to access OH3 this way I get an error
openHAB connection error: HttpClient@4016d1a5{FAILED} is stopped
Any ideas how to fix this? is this a permissions issue or some incompatibility with UnRaid Docker (my suspicion). I am running UnRaid 6.8.2 and have tried 6.8.3 and 6.9.rc2 but it makes no difference. I have also removed and recreated the docker image and docker containers, without a better result. If I switch over to OH2 I immediately am able to access the local OH2 WebUI. I also tried installing OH3 on a MacOS VM hosted on UnRaid using br0 just like my dockers and that worked like a charm without issue, so I know OH3 can run on UnRaid network setup. If it was only UI access I wouldn't be too concerned, but any traffic such as OWNTracks that uses the home.myopenhab.org interface is not able to communicate with my OH3 installation and therefore I have no way to update Presence detection that involves the GPS Tracker/OWNTracks.
Any ideas as what might be the problem or what to try next? Any arguments I should be using during the install?
- 2
-
Just updated my unRaid from the Original Intel MB D865GLCLK and Celeron, which were still working fine BTW after 6+ yrs. I was toying with adding another 4 port Promise SATAII and increasing the RAM to 2GB from the 512MB I was using, but for a very few bucks more I got much more expandability and better performance. New MB is a Foxconn G41MXE and Celeron E 3400 dual core. 4GB DDR3 Ram 8 2GB SATA + 1 Hot Swap HDD on 2 Promise PCI SATAII cards + MB SATA connectors. Working fine so far. LAN recognized no issue. This MB has 2 PCI 1 PCIE 1x and 1 PCIE 16x. 4 SATAII connectors on the MB. Lot's of potential expansion for pretty low investment. Won't set any speed record, but that's not why/how I use unRaid. Using unRaid 4.7
This is just FYI since my searches turned up nothing regarding unRaid compatibility for this board.
UPDATE 4/15/2012: this weekend a I received a Highpoint RocketRaid 2300 pcie x1 I purchased on ebay. I have been unable to get the G41MXE to acknowledge the presence of the card. This has nothing to do with UnRaid as the card should post on boot prior to loading the OS and it doesn't. I have Asus P5WDH I use for multi OS and video encoding that I was able to get the RR2300 recognized, and was able to flash the bios to latest build dl from HighPoint (V2.5). Still no go with G41MXE. I tried a number of settings and combinations in both RR2300 bios as well as the G41MXE without any luck. At this point I would say that the RR2300 and G41MXE are incompatible.
-
I agree that restoring a few files from within TimeMachine is not a problem. I able to do that, no issue. What I am curious to know has anyone tried accessing their Time Capsule from the Install DVD and/or restoring an entire volume.
-
I'm trying to do a restore from the DVD, to restore the entire Volume. I have tried Guest w/o a pw and no luck. I don't know if I did something wrong when I setup or this is a bug, but either way it's not good.
Also, I have installed the patch/update for 10.7.3.
Just curious if anyone has had any success in accessing their Unraid TimeCapsule for a full restore from their DVD/ Intall Disk. Might help narrow this down to a system issue ( my probelm) or a software problem ( our problem). A backup won't do us any good if we can't retreive it.
-
I'm having trouble doing a complete restore. It keeps asking for a password for the UnRaid server. In my case /Tower. I am not using password protection on my UnRaid or the Time Capsule(Guest). Any ideas on what I may be missing?
[Plugin] Tailscale
in Plugin Support
Posted
I’m also having the same issues with the WebGUI crashing on startup. I’m now running the docker TailScale without issue. WebGUI is reachable, all shares can be accessed as can all docker containers so it doesn’t appear to be a server or network setup issue.