r4z0rLA

Das glaube ich auch. Und bei beiden wird ASPM L1 angegeben. Aber ich bekomme es nicht aktiv. Was mich noch mehr wundert bei der Sache: Das Gerät gibt es ein weiteres Mal (02:09.0 PCI bridge mit gleichem Namen Advanced Micro Devices, Inc. [AMD] Device 43ea), und das lässt ASPM einfach per Powertop aktivieren.... Ich frage mich, ob an 02:00.0 und 02:04.0 intern Gerätschaften hängen, die kein ASPM zulassen? Aber die Frage ist was das sein soll, Chipsatz, USB, Ethernet und Sata werden bei den anderen Geräten schon gelistet.

Hallo zusammen, ich habe auf meinem blanken System (sprich nur MB und CPU mit Unraid-Stick) bei allen Devices bis auf zwei ASPM aktiviert, aber ich kann mir nicht ausmalen, welche beiden Geräte die 02:00.0 und 02:04.0 sind und wie ich bei denen auch noch ASPM aktivieren kann. Anscheinend wird ASPM L1 ja von den beiden unterstützt. Im BIOS habe ich alles zu dem Thema ASPM und Energie sparen auf Enabled gesetzt. Zusätzlich Radeontop installiert, Auto Tweak auf Super Powersave. Die Powertop Befehle aus dem Stromsparen Thread mit Powertop sind auch in der go-Datei eingefügt und aktiv. Hat da vielleicht jemand einen Tipp für mich? Sorry, bin leider noch blutiger Anfänger... Auszug ASPM Diasbled: 02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us Settings: ASPM Disabled; Disabled- CommClk- Status: Speed 2.5GT/s, Width x0 02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #4, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us Settings: ASPM Disabled; Disabled- CommClk- Status: Speed 2.5GT/s, Width x0 Ganze Ausgabe für ASPM and PCIe PM status: 00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #2, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <32us Settings: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x4 00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us Settings: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x16 01:00.0 USB controller: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset USB 3.1 XHCI Controller (prog-if 30 [XHCI]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us Settings: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x4 01:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset SATA Controller (prog-if 01 [AHCI 1.0]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us Settings: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x4 01:00.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] 500 Series Chipset Switch Upstream Port (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us Settings: ASPM L1 Enabled; Disabled- CommClk+ Status: Speed 8GT/s, Width x4 02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us Settings: ASPM Disabled; Disabled- CommClk- Status: Speed 2.5GT/s, Width x0 02:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #4, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <64us Settings: ASPM Disabled; Disabled- CommClk- Status: Speed 2.5GT/s, Width x0 02:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 43ea (prog-if 00 [Normal decode]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #9, Speed 8GT/s, Width x1, ASPM L1, Exit Latency L1 <64us Settings: ASPM L1 Enabled; Disabled- CommClk+ Status: Speed 5GT/s, Width x1 05:00.0 Ethernet controller: Intel Corporation Ethernet Controller I225-V (rev 03) Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: Port #9, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <4us Settings: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 5GT/s, Width x1 ASPM Capabilities: PCI-PM_L1.2- PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ L1_PM_Substates+ ASPM Settings: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- 06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir [Radeon RX Vega 6 (Ryzen 4000/5000 Mobile Series)] (rev d8) (prog-if 00 [VGA controller]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us Settings: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x16 06:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us Settings: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x16 06:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 (prog-if 30 [XHCI]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us Settings: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x16 06:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 (prog-if 30 [XHCI]) Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D3 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME- Capabilities: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us Settings: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+ Status: Speed 8GT/s, Width x16