spark11
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
Gallery
Bug Reports
Documentation
Landing
Posts posted by spark11
-
-
shot in the dark bump....pretty much giving up on this
-
Does anyone here with above 1gbit internet have any issues like this? Honestly have zero idea of where to go from here...my other machines work fine, its just docker apps that seem to have some sort of cap that I cant remove
Speed test run and dashboard showing that Im getting 2gbit speeds up and down
-
21 minutes ago, Vr2Io said:
Just double confirm, does speedtest was desktop (ethernet) to Internet server ?
Just updated my original post with screenshots of my connection displayed on the dashboard and the speedtest results!
-
18 minutes ago, Vr2Io said:
Just double confirm, does speedtest was desktop (ethernet) to Internet server ?
speedtest app in unraid and speedtest.net on the desktop. Not a speedtest between the two machines
-
21 minutes ago, Vr2Io said:
Does other ethernet device also 2.5/5G capable ?
If your speed test was under WiFi which provide by BGW320 then you will got over 1G speed.
At BGW320, the blue port mark as 5G, does it correctly negotiate at 2.5G with your 2.5G switch ?
Hi,
Yep! i have a 2.5g switch connected to the blue port and both my desktop pc and unraid server are showing a 2.5gbe connection. Speed tests confirm as well! Everything else seems to be behaving as if I have 1gbit still though on my server
-
just to follow up...seems that my other apps like Plex arent able to utilize my full bandwidth either. I had a download capped at 1gbit in qbit and my shows were slow to load in plex. shouldnt i have more than enough bandwidth to have a tv show load without buffering considering i'm getting 2.4gbit speeds in speedtest?
-
Hi All!
So I recently upgraded from gigabit to 2gbit symmetrical with ATT. Everything seems to be fine, dashboard shows the 2.5gbe change and the speedtest app is showing i'm getting around 2400mbit up/down. For some reason when I'm downloading a file in qbittorrent it will show my speeds capped at 1gbit and I'll even stop seeing updates in the app on download progress as if the port is saturated. Any reason why the speedtest app will show 2.5gbit speeds available but behavior like this seems like it's still running on gbit?
BGW320 connected to a TRENDnet 2.5 5port switch
Thanks for any help!
When I remove my 1gbit download cap in qbit, here's what I see in my dashboard
Then my app becomes unresponsive due to "saturating" the gigabit speed I'm assuming? Qbit will update once transfer is done and show everything at 100%
-
Docker service ended up failing after a few app restarts due to these freezes...seems qbittorrent has an execution error now and won't open.
-
Hi All!
I'm currently using the latest version of qBittorent and having a couple synology devices connected as well. I noticed at times my cpu will have a couple cores pinned to 100 for no reason and realized it's qbitt for some reason. This tends to happen whenever I'm moving files from my array to the synology where I store long term files. I recently decided to move this storage to my more powerful nas and whenever I try to migrate the files by setting a new location in qBitt the transfer starts off fine but then drops to 1-3MB/s. I need to restart the docker or my cpu will just stay at 100% on a couple cores. Any idea why this happens? A couple people on reddit asked me if I found a solution to this but surprised I dont see it mentioned more often. Thanks for your help!!
-
Hi All,
Was making some recent changes and think I broke something. Ended up reinstalling my appdata from a backup. Noticed this morning that my plex transcoder was pinning a core and had been running for 6 hours with 0 streams active. I think this was going on and I didnt notice since I direct play everything at home. Was checking the logs and noticed the following error:
Jobs: Exec of /config/Library/Application Support/Plex Media Server/Codecs/EasyAudioEncoder-1785-linux-x86_64/EasyAudioEncoder/EasyAudioEncoder failed. (13)
Seems this is happening only when eac3 codec is used which is most of my WEB-DL stuff. I googled around and noticed it might be a permissions issue. Checked permissions on the codec folder and wasn't seeing anything amiss. Has anyone run into this before? I cant seem to stream most of my library at the moment, most likely my users cant either. Any help would be appreciated!!
-
On 6/27/2022 at 9:11 AM, wgstarks said:
Just set the location in Sonarr to your synology. It should work just like it did before except Sonarr will just be moving the files to a different location.
That's what I was doing but unpackerr would wait until moving the files from my cache to the synology before extracting which slows everything down
-
Hi all!
I recently swapped my completed download location to my synology NAS to save on some array space. Most of my movies come in compressed form and normally unpackrr would extract the files and sonarr would do it's thing prior to mover moving the files to the array. Now that I have the remote location set as my download completed location, seems that the files are being moved right away (as expected in hindsight). I was wondering if there's any way to have the files stay in my cache download location while unpackrr does it thing then have the files moved to my synology download share? Any advice would be appreciated!
-
13 hours ago, dlandon said:
Sonarr will have to be accessing the share through SMB. The recycle bin won't work by accessing the share through /mnt/didks/mountpoint.
Gotcha, thanks for the info!
-
2 hours ago, tjb_altf4 said:
Sonarr/Radarr can use a recycle bin, but it's not enabled by default, and the path is customisable and not necessarily the same folder used for SMB recycle bin.
hmm gotcha, I'd like to set it up so that sonarr deleted files would go to the recycle bin...will try to sort that out. Thanks!
-
2 hours ago, Squid said:
To elaborate a bit more, the recycle bin is for SMB shares. Highly unlikely that you've got sonarr set up to use SMB since you're most likely mapping the path to your media in the template.
-ahh ok that makes sens thanks!
-
Hi All,
I recently deleted a file by accident and noticed that there was no recycle bin folder. I tested by adding a file through windows explorer and deleting and successfully created a recycle bin folder. Just wondering why sonarr deleted files seem to skip over the recycle bin? Do I need to add a path to my arr containers for them to delete to the recycle bin?
Thanks for your help!
-
3 minutes ago, jmztaylor said:
My quick guess is that the ports aren't forwarded on your router. I think Windows apps would use uPnP to open the ports automatically. Try setting up port forwarding in your router for that port to see if that works
Thanks for the reply! I opened the port in my router's firewall as I did previously with my windows machine. I did the same for my plex server port which is run off my unraid machine which is being read properly according to canyouseeme.org. Not sure if port forwarding and opening incoming traffic is the same but when I try to look up port forwarding for ATT routers it provides the steps I followed.
-
Hi All,
Just finally completed my migration of 60TB/2 parity array this morning and think I finally have everything completely set up! Thanks to all the amazing people here and on reddit that provided support. I just have one last hurdle...having my downloaders connectable so I can seed properly. Previously was on a windows machine and had 0 issues with the method I'm using. I even tried using the same port (old machine decommissioned) and canyouseeme.org is showing it as blocked. I confirmed that my plex docker port is working fine for remote access. has anyone had any similar issues? The tracker recommends using a port between 49152-65535.
According to this page the ones I've tried arent blocked on the ATT network - https://about.att.com/sites/broadband/network
Any help would be greatly appreciated!
Help with Moving Data between unRAID/Synology
in General Support
Posted
Hi All,
So i've been having this issue for some time now but i havent been able to find any resolution for it. I currently have an unRAID server where I have hard-links set up. I also have a Synology 920+ connected as a remote for stuff that needs to be seeded but isn't imported into my library. Often when I try to change my save location from my unRAID server and migrate the files to my Synology, my cpu useage will spike and I'll notice my transfers slow down from maxing out at a gigabit to about 25-30MB/s or slower. When this occurs i need to restart qbittorent and often that will fail and I'll need to shut down docker and restart. More often than not it will fix itself after that but I'm currently moving a large number of files and it keeps triggering this. I keep seeing multiple threads pin at 100% momentarily and then drop back down. As soon as I shut down qbit, everything goes back to normal. Has anyone experienced this behavior before?
Specs
10400 CPU
32GB ram
MSI MPG z470 gaming plus
6x18TB
2x16TB
Synology 920+
2x18TB
2x14TB
Thanks for in advance!