sgrangers

Issue resolved. Processor issue. I guess my processor has burned in over the months of 24/7 usage. And i got it 2nd hand, not sure how the previous user might abuse it. I been trying all sorts of methods and settings in BIOS. until i limited the multiplier to x30. which means my 5900x will only hit 3.0Ghz max. And so far its been stable.

i'm just leaving my system in BIOS and see if it stays there without rebooting. just to isolate unraid OS issue.

it just rebooted again. here are the logs from the flash drive. syslog-previous syslog

Hi, i'm suddenly getting random freezing/reboot on my unraid. I've tried replacing the 2x16GB ram kit with another 2x16GB from my desktop, 1 piece at a time across 4 slots. Still getting the problem. It would run for a minutes or couple of hours and either reboot itself or black screen. I've also pulled out the 10G NIC and SAS card. but still same. I'm worried it is a motherboard issue. 2 months ago when i upgrade to this AMD system, i faced stability issue as well, and i disabled global C state and set power supply idle control to "typical" and its been stable since. I'm thinking of replacing the USB Boot drive or PSU, as its been plugged in and running 24/7 for 2 years, but its really getting quite obvious that this could be a motherboard issue. Specs: Unraid 6.12.10 AMD 5900x Asus x570 Crosshair VIII Hero Corsair 2x16GB @ 2666mhz, 2nd set at 3200mhz, but i disabled the DOCP (XMP) and its running on 2133mhz. LSI 3008 Intel X550-T2 Palit 1070 for passthrough to VMs, and Plex Transcoding. Corsair HX850 I'm only using my server as a NAS Storage, Torrent and Plex. There are VMs but i hardly use them. I've not enabled the array, unplugged the SAS card and Drives to prevent improper shutdown damaging the data or drives. I've just enabled mirror syslogs to Flash, but there's nothing much. I've attached the diagnostics. nasty-diagnostics-20240717-0246.zip

its been 20 hours. so far seem stable. *fingers cross* lets hope its really the C states. but regarding the mcelog. how do i verify? cuz it says this processor is not supported. Update: Ah forget it. i realized i can't pipe the logs to the shares as the array is offline during bootup and shutdown process. and mcelog probably gets reset during a reboot. so i will just pray that my system is stable now.

Hi, i need experts to help diagnose my system. Last night i migrated to new motherboard and processor, re-using old parts such as RAM, hard drives, SSD, NIC, SAS card. My Old Specs: Asus z170 Sabertooth + Core i7 6700k Corsair vengeance DDR4 2666mhz1 Palit GTX1070 for Plex Transcode Intel X550-T2 10G NIC LSI 3008 24 Port SAS Card Samsung 980 Pro 2TB as Cache 8x 16TB, 4x 10TB, All Toshiba Enterprise Capacity Drives I only use it for Plex with GPU Passthrough for transcoding, qbittorrent, and i run a couple of CentOS and Windows VM. System has been running well for 2 years. Until i decided to upgrade to Asus Crosshair VIII x570 + Ryzen 5900x last night. Then as i was running parity check after bringing up the system, it rebooted abruptly and i get the Machine Check Event error for the first time. Attached Diagnostics logs. When i do a "mcelog" in terminal, i get the following error: mcelog: ERROR: AMD Processor family 25: mcelog does not support this processor. Please use the edac_mce_amd module instead. CPU is unsupported Just Disabled Global C-States in UEFI. Observing. Thanks everyone. nasty-diagnostics-20240512-2136.zip