Jump to content

Bcy

Members
 View Profile  See their activity

  • Posts

    50

  • Joined

  • Last visited

 Content Type 

Posts posted by Bcy

    Parity drive keeps spinning up by itself (no read/write activity)

    in General Support

    Posted

    On 12/6/2023 at 5:51 PM, Kindred said:

    Got a new drive of the same model and they are both spinning up for no reason by themselves, even with APM turned off.

    They spin up always at the same hour/minute of the day +-5 seconds.

     

    Also changed from motherboard SATA ports to a LSI 9207-8i with no results.

     

    I'm a bit lost. I guess it is a firmware issue and I cannot fix it.

    Did you fix this issue?  I have same issue ......

    東芝MG08系列，隨機旋轉(SPIN UP)問題

    in Chinese / 简体中文

    Posted

    英文群發了沒啥人回答.... 來問看看中文群的大佬朋友們~~

     

    我有兩款型號的硬碟 MG07*4 和 MG08*6 系列，MG07都保持得很好，休眠就不會再隨機旋轉起來了

    MG08就會每過一段時間無緣無故地旋轉起來，用過安全模式不包含插件也是過一樣..... 真的無解~

     

    透過主板上的SATA或是LSI HBA2308狀況都一樣，我在想會不會是MG08的FW的問題....

    有人也有遇到這問題嗎~

      

    Jan  4 07:56:54 Tower emhttpd: read SMART /dev/sdi
Jan  4 09:56:24 Tower emhttpd: read SMART /dev/sdj
Jan  4 09:56:55 Tower emhttpd: spinning down /dev/sdi
Jan  4 10:42:29 Tower emhttpd: read SMART /dev/sdh
Jan  4 10:44:18 Tower emhttpd: read SMART /dev/sdk
Jan  4 10:59:16 Tower emhttpd: read SMART /dev/sdb
Jan  4 11:02:22 Tower emhttpd: read SMART /dev/sdc
Jan  4 11:56:25 Tower emhttpd: spinning down /dev/sdj
Jan  4 12:42:30 Tower emhttpd: spinning down /dev/sdh
Jan  4 12:44:19 Tower emhttpd: spinning down /dev/sdk
Jan  4 12:59:17 Tower emhttpd: spinning down /dev/sdb
Jan  4 13:02:23 Tower emhttpd: spinning down /dev/sdc

----------------------------------------------------------------------------------------------------

MG08 Series of Pairty Disk*2 (Random Spin up)
TOSHIBA_MG08ACA16TE_41M0A1V3FWTG - 16 TB (sdb)
TOSHIBA_MG08ACA16TE_41X0A1C4FWTG - 16 TB (sdc)

MG07 Series of Disk*4 (Wont Random Spin up, Work fine)
TOSHIBA_MG07ACA14TE_2110A02MF94G - 14 TB (sdd)
TOSHIBA_MG07ACA14TE_2110A01NF94G - 14 TB (sde)
TOSHIBA_MG07ACA14TE_11V0A253F94G - 14 TB (sdf)
TOSHIBA_MG07ACA14TE_21K0A08KF94G - 14 TB (sdg)

MG08 Series of Disk*4 (Random Spin up)
TOSHIBA_MG08ACA14TE_51N0A1YLFRVH - 14 TB (sdi)
TOSHIBA_MG08ACA14TE_51M0A049FRVH - 14 TB (sdh)
TOSHIBA_MG08ACA14TE_51U0A1XXFRVH - 14 TB (sdj)

     

    tower-diagnostics-20240103-1112 (1).zip

    Toshiba MG08 Series Random Spin up issue

    in General Support

    Posted · Edited by Bcy 

    Jan  4 07:56:54 Tower emhttpd: read SMART /dev/sdi
Jan  4 09:56:24 Tower emhttpd: read SMART /dev/sdj
Jan  4 09:56:55 Tower emhttpd: spinning down /dev/sdi
Jan  4 10:42:29 Tower emhttpd: read SMART /dev/sdh
Jan  4 10:44:18 Tower emhttpd: read SMART /dev/sdk
Jan  4 10:59:16 Tower emhttpd: read SMART /dev/sdb
Jan  4 11:02:22 Tower emhttpd: read SMART /dev/sdc
Jan  4 11:56:25 Tower emhttpd: spinning down /dev/sdj
Jan  4 12:42:30 Tower emhttpd: spinning down /dev/sdh
Jan  4 12:44:19 Tower emhttpd: spinning down /dev/sdk
Jan  4 12:59:17 Tower emhttpd: spinning down /dev/sdb
Jan  4 13:02:23 Tower emhttpd: spinning down /dev/sdc

     

    My Disk Number 

    
MG08 Series of Pairty Disk*2 (Random Spin up)
TOSHIBA_MG08ACA16TE_41M0A1V3FWTG - 16 TB (sdb)
TOSHIBA_MG08ACA16TE_41X0A1C4FWTG - 16 TB (sdc)

MG07 Series of Disk*4 (Wont Random Spin up, Work fine)
TOSHIBA_MG07ACA14TE_2110A02MF94G - 14 TB (sdd)
TOSHIBA_MG07ACA14TE_2110A01NF94G - 14 TB (sde)
TOSHIBA_MG07ACA14TE_11V0A253F94G - 14 TB (sdf)
TOSHIBA_MG07ACA14TE_21K0A08KF94G - 14 TB (sdg)

MG08 Series of Disk*4 (Random Spin up)
TOSHIBA_MG08ACA14TE_51N0A1YLFRVH - 14 TB (sdi)
TOSHIBA_MG08ACA14TE_51M0A049FRVH - 14 TB (sdh)
TOSHIBA_MG08ACA14TE_51U0A1XXFRVH - 14 TB (sdj)
TOSHIBA_MG08ACA16TE_41M0A1UKFWTG - 16 TB (sdk)

     

    Toshiba MG08 Series Random Spin up issue

    in General Support

    Posted · Edited by Bcy

    Hello Everyone.

     

    I got a issue, I have 10 pcs HDD, including Toshiba MG07 series and MG08 series.

    MG07 series work fine, wont random spin up. But MG08 series will random spin up and no why.... But MG07 series always work fine wont random spin up. My issue is why only Toshiba MG08 series will random spin up ? But MG07 series wont and work fine

     

    I set 2 hours will be spin down. and after about 5 hours MG08 series will random spin up for one day 2~3 times.

    I try using safe mode without all plugin. and still random spin up by MG08 series....

     

    Should I try reinstall new usb unraid OS ? If I reinstall usb for unraid OS. How to backup and restore my setting?

     

    Tks for help.

    tower-diagnostics-20240103-1112.zip

    [Plugin] Spin Down SAS Drives

    in Plugin Support

    Posted

    On 11/28/2022 at 3:30 AM, DiRiN said:

     

    I looked into the File Activity plugin as suggested. I was having issues with it, and with investigating how to get it to work I had installed the Fix Common Problems / Tips and Tweaks Plugin. I then adjusted the Tips and Tweaks plugin setting for Max Watches 'fs.inotify.max_user_watches': to 6524288 and changed the settings of the File Activity Plugin to the following:

     

    image.png.1ac0cc881c48f06539f2d23fe8cd96d2.png

     

    After making all the above changes to get the Plugin for FIle Activity to work correctly, then my SAS Spindown started working correctly. lol. So now I have no idea what was causing it. But if I had to make a guess it's the inotify changes I made in Tips and Tweaks. I'll leave it as it is now that it's working. Odd little workaround, that the changes required for one to work properly causes this plugin to work properly.

     

    System Logs as of now:

    -----------------------------------------

    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdm
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdj
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdk
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdh
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdg
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdd
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sde
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdb
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdr
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdf
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdc
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sds
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdq
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdl
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdi
    Nov 27 20:04:09 Tower  emhttpd: spinning down /dev/sdp
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdm
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdk
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdj
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdg
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdh
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sde
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdc
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdd
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdb
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdf
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdi
    Nov 27 20:04:09 Tower SAS Assist v2022.08.02: Spinning down device /dev/sdl

     

    image.png.e34825c0c844d379003f7c07203343b4.png

     

    I have to thank you . really helpful .

    Dynamix - V6 Plugins

    in Plugin Support

    Posted

    18 hours ago, alturismo said:

    exactly, when you uninstalled it they shoul dbe gone, as mentioned ... uninstalling is enough, this was just "in case" ...

     

    CPU Fan ... like mentioned, sure you could include your CPU Fan, but your triggers are ONLY HDD Temps ... and thats for sure not what you want to achieve ... so keep the CPU Fan "out" and let this be controlled by your BIOS Fan curve.

     

    some Fans ... sure, thats how its supposed to be ... fan1, fan2, ... different rules ... you set them individually while they reside on individual sockets on your mainboard, here in my sample i have 4 fans which are using a split cable on 1 controller, so i only need 1 socket on the mainboard and 1 rule, if they all would set seperate on the mainboard i would have to set 4 rules ...

     

    image.png.782bb27c1b6989b901f4ae002a3fdd9d.png

     

     

    How to set fan rules .......

    Dynamix - V6 Plugins

    in Plugin Support

    Posted · Edited by Bcy

    31 minutes ago, alturismo said:

    usually, you just uninstallt it

     

    you can also remove from your USB drive this folder (which shouldbr necessarry)

    image.png.05cba5a5cb97cce539aecca95cbaefce.png

     

    after a reboot (uninstalling) all is gone ... and your BIOS Fan settings should do the job ... instead of the plugin.

     

    but in terms you want your fans controlled through unraid (HDD Fans !!!) rather look where may your configuration error is.

     

    i also had to go through all possible fans and test them

     

    image.thumb.png.28b293f6ea927cca62f52b9b841db5dd.png

     

    you can pretty easy do so by run the detect and watch the fan speeds if they change so you know you really have the proper one selected, as sample in the buttom line (here currently OFF as HDD's are in spindown)

     

    image.thumb.png.4dfc8c5fdd2da3363f129987d44636e1.png

     

    so, if i now change the Low / High Treehold's for testing its the correct sensor

     

    image.thumb.png.280591c2677cd5bae971f6f8d2735670.png

     

    image.thumb.png.9889f813e0af664a790446ab004ffece.png

     

    and the syslog 

    Mar 15 12:29:38 AlsServer autofan: autofan process ID 1361 started, To terminate it, type: autofan -q -c /sys/devices/platform/nct6775.672/hwmon/hwmon4/pwm5 -f /sys/devices/platform/nct6775.672/hwmon/hwmon4/fan3_input
Mar 15 12:29:38 AlsServer autofan: autofan excluding drives nvme0n1,nvme1n1 from max temp calculations

     

    so, its working ;)

     

    i went through all my controllers to figure it ... and i have some ...

     

    image.png.bdc7a40a447c5b7c2d72cae19a325e02.png

     

    in the end, alot of trial & error in the beginning, but then its working flawlessly ...

    Dear Sir,

    Thanks for your reply. I just check my flash USB, the folder directory no have that two config(txz、cfg)

    I think it already delete by before.

     

    I need check this working fine . after that at all , I will using your mothed try to base on HDD temperture

    but I got a question. You said had to go through all possible fans and test them.

    image.thumb.png.b91c8f3b831fa9481ccf09f144b9af67.png

    including CPU FAN? is it possible just setting some fans not all fans to base on hdd temperture?

     

    I try to figure out my question. is here to setting which I wont make a group fans to base on hdd temperture?

    image.thumb.png.f38c975c88746312faa746abb3257951.png

     

     

    Thanks again. 

    Dynamix - V6 Plugins

    in Plugin Support

    Posted · Edited by Bcy

    1 hour ago, alturismo said:

    cpu temp is not supported, only hdd temps ... thats what this plugin is done for.

     

    CPU Temps should be controlled by your BIOS curve.

     

    its an authors decision

    Sorry, I mean I have tow Fan, one is cpu heat sink. It working fine about auto rpm base on cpu temperture.

    But my issue is the second Fan. it is my system fan . After boot to os. I try to get cpu temp high. it working fine about auto rpm base on cpu temperture.

    And ........ after a while about 30mins or 1 hours, My system fan it wont auto speed rpm. and stock rpm. maybe is 2400 RPM.

     

    BTW my system fan max speed rpm is 3000rpm.

     

    And I need know. maybe is install this plugin effect my system fan auto speed rpm.

    I remove the plugin. but it work the same issue...

     

    BTW. I tring to using this plugin to setting my system fan auto rpm base on HDD temperture.

    But it no work !! 

    So I try to uninstall this plugin. but issue still ....

     

    Do you know how to uninstall about all about fan setting in terminal?
     

     

    Dynamix - V6 Plugins

    in Plugin Support

    Posted

    Hello Everyone, I have a issue, please help me

     

    My unraid system, My CPU Fan RPM is normal, but my system fan have some issue, my system fan speed rpm baee on cpu temperature

     

    First boot, all normal, all fine, but maybe after 30min or 1 hour, my system fan speed rpm be stuck, wont auto rpm base on cpu temperature. But other FANs All working fine.

     

    Have someone know what is happening?

     

    Tks

     

    Boot a while , Fan cant auto speed rpm

    in General Support

    Posted

    My unraid system, My CPU Fan is normal, but my system fan have some issue, my system fan speed rpm baee on cpu temperature

     

    First boot, all normal, all fine, but maybe after 30min or 1 hour, my system fan speed rpm be stuck, wont auto rpm base on cpu temperature.

     

    Have someone know what is happening?

     

    Tks

     

     

    從我的iPhone使用Tapatalk 發送

×
×
  • Create New...