[[Support] kizaing - Kavita]

Don't know if anyone else is experiencing this but im finding that the latest version of Kavita (0.6.0.0) is causing my server to spike to 80% cpu usage by just the container being active.

I don't know why this is happening but it is consistently happening and i can stop the container and see my cpu usage drop straight away.

[Realtek RTL8125 connection Issue with 6.11]

58 minutes ago, SimonF said:

which motherboard do you have? its b460 tomo.

 

lastest bios is 2022-06-17 looks like yours is 2020 cannot see why nic not found.

No idea.. Like i said.. It works inside of 6.10.3 but not 6.11 which tells me its something to do with a change in this update.

Its not a huge issue for myself as im getting a PCIE 10gbe card soon but other people might find this issue and unless someone reports this.. It won't be fixed.

[Realtek RTL8125 connection Issue with 6.11]

MSI MAG b460 Tomahawk

[Realtek RTL8125 connection Issue with 6.11]

Then only reference to this i can find in syslog is this:

Sep 26 12:30:57 Tower kernel: pci 0000:03:00.0: [10ec:8125] type 00 class 0x020000
Sep 26 12:30:57 Tower kernel: pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
Sep 26 12:30:57 Tower kernel: pci 0000:03:00.0: reg 0x18: [mem 0xa1200000-0xa120ffff 64bit]
Sep 26 12:30:57 Tower kernel: pci 0000:03:00.0: reg 0x20: [mem 0xa1210000-0xa1213fff 64bit]
Sep 26 12:30:57 Tower kernel: pci 0000:03:00.0: supports D1 D2
Sep 26 12:30:57 Tower kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

I've attached the syslog as well incase i missed something

syslog.txt

[Realtek RTL8125 connection Issue with 6.11]

Before you go ahead an type below... the fix regarding blacklisting r8169 Doesn't not work for this.

Please read issue below as this seems to go Deeper.

So I've upgraded from 6.10.3 to 6.11

I have 2 Ethernet ports on my Motherboard (Both built in.. not addition pcie slot)

I have a Intel I219-V 1gb connection which is working fine (Have been using as my general access connection)

I also have a Realtek RTL8125 connection (Which i've used as my direct connection for uploads)

Since upgrade to 6.11 That connection is not visible on my Main page or in my Network Settings.

I've checked my Hardware Profiles and can see it present but unlike when i was on 6.11 It has no driver allocation.

I've attached my Diag file for this here as well.

In the File you can see 00:1f.6 (Intel connection) has a Devicename and Kernal Drivers assigned..

But my 03:00.0 (Realtek Connection) is lacking those 2 fields.
 

This is not a hardware issue as i can downgrade to 6.10.3 and this realtek connection will appear in unraid and be usable.

I can only guess this is an OS issue.

Does anyone have Any idea's or is this gonna be a Wait for a Patch or Version upgrade for this to be fixed??

lspci.txt

[Unraid OS version 6.11.0 available]

11 minutes ago, SimonF said:

Have a look at this thread 

 

I gave that a shot and it made no difference.

It doesn't appear in my network settings as a usable port.

Equally the unraid is not assigning any drivers to the device so i can't blacklist the wrong ones if there isn't one assigned.

[Unraid OS version 6.11.0 available]

4 minutes ago, trurl said:

Says driver is loaded. Are you sure you don't have a hardware (cable, port, etc.) problem?

Equally the way unraid reports this shows a difference:

00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (11) I219-V [8086:0d4d]
    DeviceName: Onboard - Ethernet
    Subsystem: Micro-Star International Co., Ltd. [MSI] Ethernet Connection (11) I219-V [1462:7c81]
    Kernel driver in use: e1000e
    Kernel modules: e1000e

I've highlighted a line in the working ethernet port here that is missing from the none working port

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 04)
    Subsystem: Micro-Star International Co., Ltd. [MSI] RTL8125 2.5GbE Controller [1462:7c81]
    Kernel modules: r8169

Infact the Kernel module is referencing the wrong varible i believe (r8169) and it doesn't state a Kernel Driver in use..

So its very much unraid

[Unraid OS version 6.11.0 available]

2 minutes ago, trurl said:

Says driver is loaded. Are you sure you don't have a hardware (cable, port, etc.) problem?

No Hardware problem..

I can downgrade to 6.10.3 and it works fine..

Upgrade to 6.11 and its broken. Its a software element 100% as this is normally my direct connection used to transfer files to my array so im very aware of its status.

[Unraid OS version 6.11.0 available]

1 minute ago, trurl said:

system/lspci.txt

Here you go.

The none working Ethernet device is 2nd from bottom in the list.

The working port is about 3/4 devices above.

lspci.txt

[Unraid OS version 6.11.0 available]

4 minutes ago, trurl said:

attach diagnostics to your NEXT post in this thread (if you haven't rolled back)

What Diag file would you require for this? and i can attach.

 

[Unraid OS version 6.11.0 available]

Well my Secondry ethernet port on my Motherboard has disappeared with this update.

My realtek rtl8125 2.5gb socket doesn't show in usage or in network settings.

The Hardware profile section finds it but looks like Unraid is unable to assign any drivers or configuration to it.

Don't know if this was made aware during RC versions so figured i'd message here.